Avg-hd300sr The Avg-hd300sr Is A Ultra Compact Receiver. It

Transcript

AVG-HD300SR Features  Ultra thin design. The AVG-HD300SR is a ultra compact Receiver. It uses HDBaseT 2.0 technology to deliver HDMI signal with a maximum transmit tion distance up to 70/40m for 1080P/4K signal via a Cat5e / Cat6A cable.  Supports Full HD: Delivers high resolution image (1080p@60Hz@48 b/pixels/3D/4Kx2K).  Maximum transmission distance is up to 70m for 1080p and up to 40m for 4Kx2K over single CAT5e / CAT6a cable.  High Bandwidth: 10.2Gps.  HDTV Compatible, use HDMI 1.4 and HDCP2.2 compliant.  Supports CEC / IR / RS232 passthrough.  Supports bi-directional PoH.  Bi-directional RS232 / 12v IR control.  HDBaseT 2.0 technology. AVG-HD300SR PLEASE READ THIS PRODUCT MANUAL CAREFULLY BEFORE USING THIS PRODUCT. This manual is only for operational instruction only, and is not to be used in a maintenance capacity. The functions described in this version are current as at December 2016. Any changes of functions and operational parameters will be updated in future manual versions. Please refer to your dealer for the latest product details. Version 1.0 21/12/16 AVG-HD300SR SAFETY OPERATION GUIDE In order to guarantee the reliable operation of the equipment and safety of the user, please abide by the following procedures during installation, use and maintenance: 1. The system must be earthed properly. Please do not use two blade plugs and ensure the AC power supply ranges from 100v to 240v and from 50Hz to 60Hz. 2. Do not install the units in an environment where they will be exposed to extreme hot or cold temperatures. 3. These units will generate heat during operation, please ensure that you allow adequate ventilation to ensure reliable operation. 4. Please disconnect the units from mains power if they will be left unused for a long time. 5. Please DO NOT try to open the casing of the equipment, DO NOT attempt to repair the unit. Opening the unit will void the warranty. There are high voltage components in the unit and attempting to repair the unit could result in serious injury. 6. Do not allow the unit to come into contact with any liquid as that could result in personal injury and product failure. AVG-HD300SR TABLE OF CONTENTS Introduction ............................................................................................................ 1 Introduction to the AVG-HD300SR ..............................................................1.1 Features ......................................................................................................1.2 What’s in the Box ........ ……………………………………………………………………2 Product Appearance of the AVG-HD300SR ......................................................... 3 Receiver .......................................................................................................3.1 System Connection ................................................................................................ 4 System Applications ......................................................................................4.1 Usage Guidelines.........................................................................................4.2 Connection Diagram ....................................................................................4.3 Connection Procedure .................................................................................4.4 Specifications ......................................................................................................... 5 Supported Resolutions ..................................................................................5.1 Panel Drawing ......................................................................................................... 6 Troubleshooting & Maintenance ........................................................................... 7 AVG-HD300SR 1. Introduction 1.1 Introduction to the AVG-HD300SR The AVG-HD300SR is a mini-size HDBT Receiver. HDBT 2.0 technology is used to transmit a high resolution 1080p / 4K signal to the receiver up to 70 / 40m via a Cat5e / Cat6A cable. The receiver then outputs the HDMI signal. Bi-directional RS232, 12v IR and PoH power is also transmitted across the Cat5e/Cat6A cable. 1.2 Features  Ultrathin design.  Supports Full HD: Delivers a high resolution image (1080p@60Hz@48 b/pixels/3D/4Kx2K).  Maximum transmission distance is 70m for 1080p and 40m for 4Kx2K over a single CAT5e/CAT6a cable.  High Bandwidth: 10.2Gps.  HDTV Compatible, HDMI 1.4 and HDCP2.2 compliant.  Supports CEC passthrough.  Bi-directional 12v IR and RS232.  Supports bi-directional PoH function.  Bi-directional RS232/IR control.  Uses HDBaseT technology.  LED indicators show working status. AVG-HD300SR 2. What’s in the Box  1 x AVG-HD300SR (Receiver)  2 x Mounting Brackets  4 x Screws  4 x Rubber Feet  1 x RS232 cables  1 x User Manual Note: Please confirm if the product and the accessories are all included, if not, please contact your dealer. AVG-HD300SR 3. Product Appearance of the AVG-HD300SR 3.1. Receiver RX TX No. Name LINK HDCP RX Description HDBT Link Status indicator.  OFF: No Link  GREEN: Link Successful  Blinking GREEN: Link Error HDCP compliant indicator  OFF: No HDMI traffic (no picture output)  GREEN: HDMI Traffic contains HDCP.  Blinking GREEN: HDMI Traffic without HDCP. Illuminates red when powered on ① LINK ② HDCP ③ Power ④ RS232 ⑤ IR IN RS232 connector. Connect with a 12v IR receiver to collect infrared signals, works with the IR OUT port of the Transmitter(HD300ST). ⑥ IR OUT Connect with a 12v IR Emitter to send infrared signal, works with the IR IN port of the Transmitter(HD300ST). ⑦ HDMI OUT ⑧ HDBT IN ⑨ DC 24V Connect with HDMI display. Connect to the HDBT OUT socket on the Transmitter via CAT5e/ CAT6A cable. Insert a DC 24V 1.25A power supply. (Not required if the HD300ST has power connected) Note: Pictures shown in this manual are only for reference. AVG-HD300SR 4. System Connection 4.1. System Applications Robust performance for control and signal transmission makes the AVG-HD300SR ideal in the custom installation industry, IT computer space, signal monitoring, big screen displays, conference systems, television broadcast, education, banking and security institutions etc. 4.2. Usage Guidelines 1. The system should be installed in a clean environment with temperature and humidity maintained to within equipment specification. 2. All of the power switches, plugs, sockets and power cords should be insulated and safe. 3. All devices should be connected before power is turned on. 4. Use shielded straight-thru Cat5e/Cat6Acable with TIA/EIA T568B terminations for best transmission results. 4.3. Connection Diagram c Re Tr a m ns itte r eiv er CAT5e HDMI IR Remote INPUT Projector HDMI DVD RS232 Control panel AVG-HD300SR 4.4. Connection Procedure Step 1. Connect the HDBT cable to either a AVG-HD300ST or the HDBT output of a HDBT matrix, such as the AVG-UHMS88PRO. Step 2. Connect a HDMI display (such as HDTV) to HDMI OUT port of the receiver with a HDMI cable. Step 3. When using IR control, do the following. a) Connect an IR receiver to the IR IN port of the Receiver. b) Connect an IR Emitter to the IR OUT port of Transmitter or if using a HDBT matrix connect to the IR OUT port of the matrix. Step 4. Connect a DC24V power adaptor to the power port of the transmitter or the receiver as the other will be powered via the PoH. Note: If you are connecting the AVG-HD300SR to a HDBT matrix that supports PoC, you will not require the DC24V power supply at the receiver. AVG-HD300SR 5. Specifications Model Receiver Spec Input 1 x IR IN Signal 1 x RS232 1 x HDBT IN 1 x 3.5mm mini jack Connector 1 x 3p captive screw connector 1 x RJ-45 Audio Output Digital audio, transmit through HDMI audio 1 x IR OUT Output 1 x RS232 1 x HDMI OUT 1 x 3.5mm mini jack Connector 1 x 3p captive screw connector 1 x female HDMI General Resolution Range 640x480@60Hz ~ 4K×2K@30Hz Transmission Mode Bandwidth HDMI Standard Temperature Reference Humidity Power Supply Power Consumption Dimension (W*H*D) HDBaseT 1080P@60Hz ≤70m 4Kx2K@30Hz ≤40m 10.2Gbps HDMI 1.4 and HDCP 2.2 0 ~ 50℃ 10% ~ 90% DC 24V, 1.25A 14W (Max) 115 x 16.2 x 109 mm Weight 196g Transmission Distance AVG-HD300SR 5.1 Supported Resolutions Aspect Ratio 4Kx 2K 16:9 16:10 4:3 Resolution 4096x2160 3840x2160 1920x1080 1600x900 1366x768 1280x720 1024x576 1920x1200 1680x1050 1360x768 1280x800 1600x1200 1280x1024 1024x768 800x600 640x480 Refresh Rate 30Hz 24/25/30Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60/65/70/75/85Hz 60/75/85/96Hz 60/70/75/85Hz 56/60/72/75/85Hz 60/72/75Hz Note: HDBaseT Extender supports 4k HDMI signal, please adopt quality HDMI cables compliant with HDMI2.0 for reliable transmission. AVG-HD300SR 6. Panel Drawing LINK HDCP 16.2 mm 109 mm RX 115 mm TX RX Receiver AVG-HD300SR 7. Troubleshooting & Maintenance No image on the display:      Ensure that the display device has been set to the correct input. Ensure that the HDMI cables used for both the Source/Transmitter and the Receiver/Display are properly connected and are working. Test the HDMI cables directly from a source to the display and ensure correct operation. Ensure that the Cat5e/Cat6a cable has not been damaged and that it has been terminated correctly with T568B on both ends. A temporary length of Cat5e/Cat6 can be used for testing to ensure that the devices are compatible and working properly. Ensure proper grounding of the power supply. Known issues with HDMI 1.2 source devices: Older compatibility (HDMI 1.2) may result in HDBaseT transmission issues. Colour loss or poor picture quality:     Ensure that the HDMI cables used for both the Source/Transmitter and the Receiver/Display are properly connected and are high quality. Test the HDMI cables directly from a source to a display to check picture quality. Ensure proper grounding of the power supply. If the static becomes stronger or picture quality becomes worse when connecting the video connectors, this may be due to improper grounding. Check the grounding and make sure all the components are properly grounded to a common ground. Improper grounding may cause damage to the Receiver. If your problem persists after following the above troubleshooting steps, seek further help from your authorised dealer.