Avid® Editing Application

Transcript

Avid Editing Application ® ReadMe for Media Composer® v6.0.5, NewsCutter® v10.0.5, and Symphony™ v6.0.5 IMPORTANT: Avid periodically makes software updates available for download on Avid.com at the following location:www.avid.com/us/support/downloads. Please check the above site regularly for information on available downloads for your product. Important Information Avid® recommends that you read all the information in this ReadMe file thoroughly before installing or using any new software release. Important: Search the Avid Knowledge Base for the most up-to-date ReadMe file, which contains the latest information that might have become available after the documentation was published. This document describes compatibility issues with previous releases, software installation instructions, hardware and software requirements, and summary information on system and memory requirements. This document also lists hardware and software limitations. Contents If You Need Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Changed in v6.0.4 and v10.0.4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Fixed in v6.0.4 and v10.0.4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Changed in v6.0.3 and v10.0.3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Fixed in v6.0.3 and v10.0.3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Changed in Media Composer v6.0.1, Symphony v6.0.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Fixed in Media Composer v6.0.1, Symphony v6.0.1, and NewsCutter v10.0.1 . . . . . . . . . . . . . . . . . . 26 New in Media Composer v6.0, Symphony v6.0, and NewsCutter v10.0 . . . . . . . . . . . . . . . . . . . . . . . 32 Notes on Windows 7 OS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Notes on Software Licensing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Qualified Hardware and Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Compatibility Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Setting up the NVIDIA Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Shared Storage Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Feature Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Documentation Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 2 Symbols and Conventions Symbols and Conventions Avid documentation uses the following symbols and conventions: Symbol or Convention Meaning or Action n A note provides important related information, reminders, recommendations, and strong suggestions. c A caution means that a specific action you take could cause harm to your computer or cause you to lose data. w > A warning describes an action that could cause you physical harm. Follow the guidelines in this document or on the unit itself when handling electrical equipment. This symbol indicates menu commands (and subcommands) in the order you select them. For example, File > Import means to open the File menu and then select the Import command. This symbol indicates a single-step procedure. Multiple arrows in a list indicate that you perform one of the actions listed. (Windows), (Windows only), (Macintosh), or (Macintosh only) This text indicates that the information applies only to the specified operating system, either Windows or Macintosh OS X. Bold font Bold font is primarily used in task instructions to identify user interface items and keyboard sequences. Italic font Italic font is used to emphasize certain words and to indicate variables. Courier Bold font Courier Bold font identifies text that you type. Ctrl+key or mouse action Press and hold the first key while you press the last key or perform the mouse action. For example, Command+Option+C or Ctrl+drag. 3 If You Need Help If You Need Help If you are having trouble using your Avid product: 1. Retry the action, carefully following the instructions given for that task in this guide. It is especially important to check each step of your workflow. 2. Check this ReadMe file for the latest information that might have become available after the documentation was published. Also check online for the most up-to-date ReadMe because the online version is updated whenever new information becomes available. To view the online ReadMe, select ReadMe from the Help menu, or visit the Knowledge Base at http://www.avid.com/readme. 3. Check the documentation that came with your Avid application or your hardware for maintenance or hardware-related issues. In addition to the printed documentation supplied with your editing application, the documentation is supplied in PDF format when you install the application. Topics that you print from the Help have limited page layout and formatting features. If you want to print a higher quality version of Help information, Avid recommends that you print all or part of the PDF version of the appropriate Avid manual included in the Online Library for your editing application. To access the Online Library, select Help > Online Library from within your Avid editing application. 4. Visit Avid Online Support at www.avid.com/onlineSupport/. Online support is available 24 hours per day, 7 days per week. Search the Knowledge Base to find answers, to view error messages, to access troubleshooting tips, to download updates, and to read or join online message-board discussions. Fixed in 6.0.5 and 10.0.5 The following were fixed in Avid Media Composer v6.0.5, Avid Symphony v6.0.5, and NewsCutter v10.0.5. ➤ Bug Number: UDevC00178917. When AMA linking to a QuickTime movie, the last frame was a duplicate. ➤ Bug Number: UDevC00171140. If you opened the Convert window in Avid Log Exchange and the opened the About window, artifacts would appear in the Window and you could not access the Convert results window again. ➤ Bug Number: UDevC00173841. Using a solid color background in the Title Tool may have resulted in vertical lines. ➤ Bug Number: UDevC00175264. (Symphony) The 15:1s resolution was added to Symphony Media Creation settings.173841 4 Fixed in 6.0.5 and 10.0.5 ➤ Bug Number: UDevC00175787. When importing RGB, whites appeared yellow and blacks appeared blue in the Title Tool. ➤ Bug Number: UDevC00176339. (NRCS) Selecting a story highlighted all Production Cue text. ➤ Bug Number: UDevC00178895. (NRCS) Vertically scrolling Production Cues might have covered the Save/Cancel buttons. ➤ Bug Number: UDevC00179198. (NRCS) Moving the horizontal scroll bar resulted in garbage characters at the top of the story panel. ➤ Bug Number: UDevC00176337. (NRCS) Changing fonts in the NRCS tool only applied to the active story. ➤ Bug Number: UDevC00174638. You could not batch export audio clips with names longer than 27 characters. ➤ Bug Number: UDevC00174589. The drop down menu for workspace names in the Import dialog was not wide enough to see the workspace name. ➤ Bug Number: UDevC00164322. Choosing a color from the Title Tool color palette did not always apply the correct color. ➤ Bug Number: UDevC00181114. (Macintosh) A shadow layer might have been visible on rolling titles. ➤ Bug Number: UDevC00180797. Changing the font of Sync Break text in the Timeline did not work properly. ➤ Bug Number: UDevC00178679. (Macintosh) Bins saved to the attic were adding an .avb file extension to the bin. ➤ Bug Number: UDevC00177852. In some instances, workspaces with XML files were not recognized as valid media file volumes. ➤ Bug Number: UDevC00177408. Performing a Stereoscopic QuickTime Reference exported with effects might have crashed the editing application. ➤ Bug Number: UDevC00170737. (EDL Manager) When sending a drop frame sequence back into the editing application, the editing application viewed the sequence as non drop frame. ➤ Bug Number: UDevC00169683. The Source Path was not loaded properly when batch importing an ALE file which resulted in an “Invalid FileName” error. 5 Fixed in 6.0.5 and 10.0.5 ➤ Bug Number: UDevC00175587. An XDCAM Hi-resolution import would fail if you used a different device than was used for the proxy import. ➤ Bug Number: UDevC00179541. When performing a Post to Web, the URL placeholder was not included in the web xml file. ➤ Bug Number: UDevC00179735. If Dynamic Relink was enabled, checking out clips from the Interplay Window could sometimes cause the editing application to get into a “Not responding” state. ➤ Bug Number: UDevC00172085. Video was not seen on the Record monitor when capturing video using IEEE 1394. ➤ Bug Number: UDevC00175291. If a sequence from an earlier version of the editing application, for example, 4.x was brought into the 6.x version of the editing application, not all audio tracks were functional in the Audio Mixer tool. ➤ Bug Number: UDevC00172844. Select Media Relatives did not deselect unassociated clips if the clips were selected before choosing the Select Media Relatives option. ➤ Bug Number: UDevC00156917. Send To Playback Encode option was not enabled after creating a New user profile. ➤ Bug Number: UDevC00176433. An aaf was not created on the first attempt. If you tried a second time, then it would work. ➤ Bug Number: UDevC00171742. FilmScribe and EDL Manager did not work properly if UAC was enabled on a Windows 7 system. ➤ Bug Number: UDevC00180453. The Title Tool did not apply the Safe Colors setting. ➤ Bug Number: UDevC00167923. The editing application would crash if the E-mail Setting was set to an incorrect SMTP server. ➤ Bug Number: UDevC00180010. The Interplay login window did not hide the inserted password. ➤ Bug Number: UDevC00179913. You might have received a “Sample miscalculation” error when imported converted MXF files from Rhozet. ➤ Bug Number: UDevC00180616. Color metadata was not read properly from YCbCr for AMA linked clips. 6 Changed in v6.0.4 and v10.0.4 ➤ Bug Number: UDevC00180610 . You might have received “Disk access” errors when importing files with invalid characters into NewsCutter. ➤ Bug Number: UDevC00181610. In some instances, Media Creation Settings were not sticking. ➤ Bug Number: UDevC00176500. In some instances, importing IMX30 MXF media did not import audio tracks properly. Changed in v6.0.4 and v10.0.4 The following was changed in Avid Media Composer v6.0.4, Avid Symphony v6.0.4, and NewsCutter v10.0.4. Updated NVIDIA Driver NVIDIA driver version 310.90 has been qualified with this release. UDevC00176976 The editing application has qualified NVIDIA driver v310.90. The standard configuration requires that the Global preset of the Global Settings for the NVIDIA driver be set to “3D App - Video Editing.” However, with this setting, the Marquee Title tool will not launch. If you need to use Marquee, set the Global preset to “3D App - Default Global Settings.” If you do not use Marquee, keep the Global preset set to “3D App - Video Editing. Tape ID Character Limit You can specify a tape ID character limit during Send to Playback. Certain playback systems truncate Tape ID names that are too long. This option allows you to set the Tape ID name length. Access the Transfer Settings dialog box. Select Tape ID Character Limit and enter a value for the Tape ID limit. Exporting and Importing Markers as an XML File You can export markers from a sequence or a clip. A text (.txt) or XML (.xml) file is created when you export the marker and a tab-delimited file or XML file displays all the information about the marker. You can then send the .txt or .xml file to those who need to review and give feedback about the sequence or clip. They can place additional comments in the text file or XML file and send it back for you to reimport the marker comments back into your sequence. n You can also import the text file into a spreadsheet program, such as Excel. You can also use the Markers window to import markers back into your sequence. 7 Fixed in v6.0.4 and v10.0.4 To export markers: 1. From the Markers window, right-click and select Export Markers and select Text or XML. A dialog box opens, asking if you want to export only the selected markers or export all markers. 2. Click All or Selected. The Choose location for Exported Markers dialog box opens. 3. Type a file name and click Save. The marker is saved as a either text file (.txt) or XML (.xml) file. To import markers. 1. With a sequence loaded in the Record monitor, right-click and select Markers. 2. From the Markers window, right-click and select Import Markers. The Import dialog box opens. 3. From Files of type, select the tab-delimited file or Text/XML file containing the markers you want to import, and then click Open. 4. (Option) Another way to import a marker file is to select the tab-delimited marker file or the xml file and drag it into the Markers window. Fixed in v6.0.4 and v10.0.4 The following were fixed in Avid Media Composer v6.0.4, Avid Symphony v6.0.4, and NewsCutter v10.0.4. ➤ Bug Number: UDevC00176433. An aaf was not created on the first attempt. If you tried a second time, then it would work. ➤ Bug Number: UDevC00171261. Markers disappeared on AAF exports/imports of audio only clips that contain volume changes. ➤ Bug Number: UDevC00173215. QuickTime “Same as Source” exports were slower if a Nitris DX was attached. ➤ Bug Number: UDevC00164171. (Macintosh) You might have received an error when changing a parameter of an RX 2 AudioSuite Declicker effect. and then previewing the results. ➤ Bug Number: UDevC00174352. A 1 frame dissolve did not work properly on MP2 audio. ➤ Bug Number: UDevC00165584. You could not import spanned .mts files. 8 Fixed in v6.0.4 and v10.0.4 ➤ Bug Number: UDevC00176715. Selecting Alt + click on a mono pan knob now correctly defaults the mono track to MID regardless of the default pan setting. ➤ Bug Number: UDevC00174516. You could not set the Clip Color in the Timeline. You can now right click the clip in the Timeline, select Set Local Clip Color, and select the color. ➤ Bug Number: UDevC00168355. You might have received an AMEResourceManager error after adjusting Motion effect keyframes with Fluid Motion effects. ➤ Bug Number: UDevC00178272. The Audio Project Settings Input tab did not display the correct options for the input source. ➤ Bug Number: UDevC00170198. Selecting Alt (Windows) + Render or Option (Mac) + Render did not render to the last selected drive. ➤ Bug Number: UDevC00177886. (Nitris DX) You might have seen an “Exception: DoMixSampleFifoToBus” error when playing a sequence with 20 audio tracks to Direct Out. ➤ Bug Number: UDevC00175090. When changing an effect duration, then pressing the Tab key, you might have received a “segmentation fault” or “access violation” error. ➤ Bug Number: UDevC00176862. Audio meters in the Audio Mixer tool updated slower than in the Audio Tool. ➤ Bug Number: UDevC00174107. (Macintosh) With a Nitris DX attached, you could not output LTC and downconvert to SD simultaneously. ➤ Bug Number: UDevC00176295. In some instances, exporting QuickTime resulted in Segmentation fault errors. ➤ Bug Number: UDevC00173454. Adding a Spectramatte effect twice crashed the editing application. ➤ Bug Number: UDevC00178447. Adjusting IN/OUT audio pans in Clip Mode did not always adjust all the clips from IN to OUT. ➤ Bug Number: UDevC00174654. On systems with many fonts installed, selecting a font in the SubCap effect created a selection window larger than the monitor making it difficult to select a font. ➤ Bug Number: UDevC00178244. Adding Audio Punch-in with postroll and dissolves on the last clip created a sequence with filler at the end. 9 Fixed in v6.0.4 and v10.0.4 ➤ Bug Number: UDevC00172771. Non-visible blanking areas did not have the correct black levels. ➤ Bug Number: UDevC00173882. The desktop video did not resize to fill the screen on 30” monitors. ➤ Bug Number: UDevC00177697. (Macintosh) When running a Japanese locale, the editing application crashed if the AirPort option (AirMac) was set in the Video Satellite settings. ➤ Bug Number: UDevC00178471. The Multigroup menu did not populate correctly. ➤ Bug Number: UDevC00175228. Performing a Send to Playback with an XDCAM sequence with the audio tracks disabled, the audio bit depth was set to 16 bit even if the audio was set to 24 bit. ➤ Bug Number: UDevC00165010. Performing a Reveal File did not work for Titles in a bin. ➤ Bug Number: UDevC00175546. XDCAM spanned clips appeared blurred after transcoding from 23.98 to 59.94. ➤ Bug Number: UDevC00175594. You might have seen matte key aliasing during full screen playback. ➤ Bug Number: UDevC00176466. Some handles might have been added when performing a Send to Pro Tools resulting in additional transcode. ➤ Bug Number: UDevC00177201. Received DIDMapper playback errors with EWC clips has been fixed. ➤ Bug Number: UDevC00177182 . Extracting a segment from the end of a sequence where there was an effect on the Master fader left the sequence length unchanged. ➤ Bug Number: UDevC00174451. You might have received a “CompareChunk” error when analyzing a track with the NEUGEN LMCorrect plug-in. ➤ Bug Number: UDevC00174538. Render times of the LM Correct Loudness plug-in were longer than in previous releases. ➤ Bug Number: UDevC00178064. Transcoding from XDCAM50 to DNxHD 120 resulted in a split image. ➤ Bug Number: UDevC00171537. Clicking between transitions in Trim mode was slower than in previous releases. 10 Fixed in v6.0.4 and v10.0.4 ➤ Bug Number: UDevC00149163. (Windows) You could not right-click the Dolby Media Meter 2 plug-in to add or delete meters. ➤ Bug Number: UDevC00164069. You could not select items from the Alogorithm pulldown menu in the Izotope RX2 RTAS plug-in. ➤ Bug Number: UDevC00178072 . You might have received “Assertion Failed” errors occurs when JKL scrubbing through audio dissolves. ➤ Bug Number: UDevC00178109. You could not perform a send to playback if the video was not loaded in the monitor. ➤ Bug Number: UDevC00177812 . You could not select a local drive for mixdown for Send To Playback in a standalone environment. ➤ Bug Number: UDevC00176601. AudioSuite D-verb effect parameters did not save properly. ➤ Bug Number: UDevC00174079. The button to turn on waveforms was disabled when entering locators. ➤ Bug Number: UDevC00174393. Some 3rd party RTAS plug-ins caused user-interface errors that resulted in AMPI errors. ➤ Bug Number: UDevC00171261. Markers disappeared on AAF exports/imports of audio only clips that contain volume changes. ➤ Bug Number: UDevC00168355. You might have received an AMEResourceManager error after adjusting Motion effect keyframes with Fluid Motion effects. ➤ Bug Number: UDevC00178345. (Nitris DX) You might have received a errors when scrubbing through XDCAM media while monitoring the D-track. ➤ Bug Number: UDevC00173354. If you had a project on an external drive, you could not unmount that external drive if Marquee had been opened. ➤ Bug Number: UDevC00177315. Waves RTAS plug-ins now load faster. 11 Changed in v6.0.3 and v10.0.3 Changed in v6.0.3 and v10.0.3 The following changes have been incorporated in Avid Media Composer v6.0.3, Avid Symphony v6.0.3 and NewsCutter v10.0.3. Support for Macintosh OS v10.8 Mountain Lion This editing application release has been qualified on Macintosh OS v10.8. Macintosh OS v10.8 includes a new security feature named Gatekeeper. It is designed to prevent users from installing unapproved applications. If you try to install this version of the editing application without first disabling Gatekeeper, you might receive an error such as the following: In order to install version 6.0.3 on a Macintosh with v10.8, you must disable Gatekeeper. To disable Gatekeeper: 1. Go to System Preferences. 2. Click Security & Privacy. 12 Changed in v6.0.3 and v10.0.3 3. Select Anywhere in the Allow applications downloaded from option. This allows you to install the editing application. Once you install and launch the editing application, you can return to this Security and Privacy window and set the download options to a secure setting. Activating and Deactivating I/O Hardware The editing application includes a hardware toggle button in the Timeline. This allows you to switch between hardware and software editing modes. The hardware toggle button appears in the Timeline if I/O hardware is attached when you launch the editing application. This includes Avid Nitris DX and Mojo DX hardware and 3rd party Open I/O hardware. This allows you to enable and disable the hardware for use with other software, for example After Effects. This also allows you to access certain software only features such as Full Screen Play. n The editing application will automatically release the hardware if you switch to another application. It will be reactivated when you switch back to the editing application. 13 Changed in v6.0.3 and v10.0.3 Activating and Deactivating I/O Hardware If the Toggle Hardware button is enabled, the I/O hardware is active. If the Toggle Hardware button is disabled, the I/O hardware is inactive. To activate the I/O hardware: t Click the Toggle Hardware button until it is active. The button is gray when hardware is active. This puts the editing application in Hardware mode. To deactivate the I/O hardware: t Click the Toggle button until it is inactive. The button has a red circle and line through it when inactive. This puts the editing application in Software mode. Certain settings and buttons in the editing application change depending upon which mode you are in. For example, the Toggle Client Monitor button is disabled when the editing application is in Software mode. And you have access to additional Audio Project Output, Video Input and Video Output options when the editing application is in Hardware mode. n The I/O third party vendors are working on updating their plugins to work with the Toggle Hardware feature. Your current third party plugins will work properly with this version of the editing application, but if you try and use the Toggle Hardware button without updated plugins, you might need to reboot the system to reacquire your hardware. Audio Punch-In Changes This release incorporates the following Audio Punch-In change: Audio Punch-In Support for Open I/O Devices If your Open I/O device allows you to record and play simultaneously, you can perform an Audio Punch-In. Check with your 3rd party vendor to see if they support simultaneous record and play. By clicking on the Punch-In monitoring button in the Audio Punch In tool, you can choose the following monitoring options: 14 Changed in v6.0.3 and v10.0.3 • On - allows for IN to OUT audio monitoring during audio punch-in. • Off - turns off IN to OUT audio monitoring during audio punch-in. When monitoring is off, the icon in the Punch-In tool changes to indicate punch in monitoring is off. For example, this mode is useful when you want to use another device such as the Mbox to provide local passthrough. • Automatic - Allows the editing application to detect if monitoring should be On or Off due to detected latency. Monitoring is not disabled if latency <100ms. If the editing application detects latency >100ms, monitoring is turned off. Note: You can choose to override this by setting the monitoring to On. In some hardware configurations, audio monitoring during Punch-In will not be allowed at all because the hardware does not support it. In this case, the Punch-In tool indicates the monitoring is Off and you cannot override it. Audio Tool Icon Change The icon to open the Audio Tool from within the Capture tool and the Audio Punch-In tool has been updated. The new icon to open the Audio Tool resemble audio meters.. Bin Name Length Change In previous releases, you could not exceed 27 characters when naming a bin. With this release, the bin name can be up to 64 characters. Note that if you name a bin in this release and try to open it in a previous release that has the 27 character limitation, you will receive a dialog indicating the bin could not be opened. Simply rename the bin to 27 characters or less to open in the previous version. 15 Fixed in v6.0.3 and v10.0.3 Fixed in v6.0.3 and v10.0.3 The following have been fixed: ➤ Bug Number: UDevC00170075. When exporting a long sequence as a QuickTime Movie, you might have received access violations. ➤ Bug Number: UDevC00172056. When AMA was not enabled, the “Automatically import Proxies when disk is inserted” option did not appear in the XDCAM tab of the Import settings. This setting now appears in the Import settings. ➤ Bug Number: UDevC00169673. (Windows only) The Title Tool displayed in English when the language was set to Japanese. ➤ Bug Number: . (NewsCutter) The Timecode Window and Composer Settings now appear in the Settings window. ➤ Bug Number: UDevC00171754. With this release of the editing application, some performance improvements have been made. For example, you might see improvements while performing long operations such as render, export, and transcode. ➤ Bug Number: UDevC00168362. Media Indexer/QM notification timing issue caused media offline. ➤ Bug Number: UDevC00170737. When opening a drop frame edl in EDL Manager, the edl would appear as non drop frame. ➤ Bug Number: UDevC00163231. When attached to a Sony PDW-U2 device, you might have received Out of Memory errors. ➤ Bug Number: UCevC00170030. Importing .aeo files into the editing application resulted in access violations. MetaSync is not supported with this release of the editing application. You will receive a “format not supported” message if you try to import an .aeo file. You can still open a meta track sequence that was created prior to this release. ➤ Bug Number: UDevC00169650. (Macintosh) Occasionally, moving segments vertically in the Timeline would change the Composer window to four frame display and sound an error alert. ➤ Bug Number: UDevC00168344. The color selected in the Marquee color picker did not save properly. 16 Fixed in v6.0.3 and v10.0.3 ➤ Bug Number: UDevC00168714. Occasionally, when dragging an effect to a clip, the effect was applied correctly, but the clip was not always highlighted and the blue bar did not move to the new clip. ➤ Bug Number: UDevC00169442. You might have received “Some destinations specified in the export options are not available” errors when exporting AAF to local drives. ➤ Bug Number: UDevC00169420. Surround track options were missing from the create new track shortcut. ➤ Bug Number: UDevC00169580. You could not rename a crawling or rolling title until the Save Window was activated. ➤ Bug Number: UDevC00169432. When editing clips names, the Up and Down arrows now move the cursor to the beginning and end of the clip name. ➤ Bug Number: UDevC00171080. Clip name changes were not always updated in Interplay after performing a checkin. ➤ Bug Number: UDevC00165381. The Timeline did not redraw correctly when zooming in on a complex sequence. ➤ Bug Number: UDevC00171496. The blur effect was not working properly with a Mojo DX. ➤ Bug Number: UDevC00167775, UDevC00164995. You could not exit Quad Split mode after loading a clip into the Source monitor. ➤ Bug Number: UDevC00169820. M2v files extracted from transferred OP1A clips contained discontinuous timecode. ➤ Bug Number: UDevC00170630. P2 clips larger than 4GB did not writeback properly. ➤ Bug Number: UDevC00169291. An EDL from a sequence with audio from a stereoscopic clip crashed EDL Manager. ➤ Bug Number: UDevC00168200. Japanese characters did not display properly in the titles of windows. ➤ Bug Number: UDevC00170706. (NewsCutter) When the User Interface was set to a darker color, the local and mixed resolution icons did not display properly. ➤ Bug Number: UDevC00170983. You might have received an error when exporting as a Targa graphic. 17 Fixed in v6.0.3 and v10.0.3 ➤ Bug Number: UDevC00168149. After saving a settings file, the Fill Spaces with Black option was grayed out when performing a QuickTime Reference export. ➤ Bug Number: UDevC00169426. If workspaces and bin layouts were named the same, mapped workspace properties were changed to bin layout properties. ➤ Bug Number: UDevC00169437. (Macintosh) When performing Command + P and selecting Open PDF in Preview, you could not highlight text. ➤ Bug Number: UDevC00170395. Occasionally, segment arrows did not appear after lassoing clips. ➤ Bug Number: UDevC00158459. Pressing Command + lasso did not invert the selected clips in the bin. ➤ Bug Number: UDevC00170539. When editing long clip names in the bin, sometimes the clip name would appear unnecessarily truncated. ➤ Bug Number: UDevC00170879. Selecting Full Size Video did not work properly. ➤ Bug Number: UDevC00168093. Color Correction values did not always display the current values. ➤ Bug Number: UDevC00169663, UDevC00167787. Color Correction settings did not refresh properly when switching to the Color Correction workspace. ➤ Bug Number: UDevC00171323. The application might crash when clicking on markers in a bin after adjusting gain an the Audio Mixer tool. ➤ Bug Number: UDevC00171495. When exporting to a P2 Device, even if the “Use Enabled Tracks” option was enabled, all tracks from the sequence were exported. ➤ Bug Number: UDevC00169962. Using Command 8 and recording in Live mix mode might have resulted in a corrupt sequence. ➤ Bug Number: UDevC00171176. Windows did not resize properly after switching between workspaces. ➤ Bug Number: UDevC00171217. The cancel shortcut now works properly on a French Keyboard. ➤ Bug Number: UDevC00171622. When importing an AAF which contains clips that already existed, the clips which were referenced in the AAF would go offline. 18 Fixed in v6.0.3 and v10.0.3 ➤ Bug Number: UDevC00169927. (Macintosh/ISIS) If the General Settings is set to allow bins to have more than 27 characters and Use Windows Compatible names is deselected, when you created a new bin or renamed an existing bin, the bin might have vanished from the project folder. ➤ Bug Number: UDevC00171197. Occasionally, markers would appear in the Timeline where they should not have appeared and they were not selectable. ➤ Bug Number: UDevC00170259. (XDCAM) When performing a Send to Playback with stereo as the transfer choice might have resulted in multiple mixdown copies in the bin. ➤ Bug Number: UDevC00170953. Arabic text did not display properly in the NRCS Tool. ➤ Bug Number: UDevC00170812. Inserting segments into a sequence dragged from Interplay Access crashed the editing application. ➤ Bug Number: UDevC00168117. Region stabilizer autozoom did not zoom properly. ➤ Bug Number: UDevC00169968. Creating titles placed .desc files in Shared Avid Projects folder and did not delete them. ➤ Bug Number: UDevC00169929. You might have received Access violation errors when performing a write-back to a P2 card. ➤ Bug Number: UDevC00170605. The HDSDI Input selection was not available in the Capture Tool input menu. ➤ Bug Number: UDevC00170544. Consolidating AMA linked ARRI DNxHD media was slower than in previous releases of the editing application. ➤ Bug Number: UDevC00169964. You could not edit titles when the Bin was in Frame or Script view. ➤ Bug Number: UDevC00169917. Copying any text from another program and trying to paste it into a bin caused the editing application to quit. ➤ Bug Number: UDevC00170688. (Symphony) The Output to DV Device option was missing from the Video Display Settings. ➤ Bug Number: UDevC00170416. You could hear loud clicks during audio scrub if the Passthrough mix tool was used with SPDIF audio sources. 19 Fixed in v6.0.3 and v10.0.3 ➤ Bug Number: UDevC00153279. When working with Advanced keyframes, if you dragged all keyframes, additional keyframes might have been created. ➤ Bug Number: UDevC00170189. The Read Audio Timecode function was slower than in previous releases of the editing application. ➤ Bug Number: UDevC00169571. Occasionally, AVCHD and XDCAM EX clips created mxf files with Chinese characters. ➤ Bug Number: UDevC00169644. Pressing the Enter key did not close the Markers window. ➤ Bug Number: UDevC00168291. Occasionally, when using Dynamic Relink, clip text in the Timeline appeared garbled. ➤ Bug Number: UDevC00170017. You were unable to open locked bins from a v5.0.3 or v9.0.3 version of the editing application. ➤ Bug Number: UDevC00167163. In some instances, you did not receive a Media Offline error during Send to Playback with partial offline media. ➤ Bug Number: UDevC00169924. The SubCap .STL export file did not follow the EBU standard. ➤ Bug Number: UDevC00169670. With certain settings, applying a Timewarp effect caused the editing application to become unresponsive. ➤ Bug Number: UDevC00170115. Transcoding AMA linked XDCAM media to DNxHD incorrectly skipped clips resulting in media offline. ➤ Bug Number: UDevC00169976. The Dolby-E safe light was not displaying properly. ➤ Bug Number: UDevC00169621. Clip names were truncated when highlighted in Frame and Script view. ➤ Bug Number: UDevC00169757. Audio from Automatic Duck was 4 times longer when exported as a QuickTime Reference. ➤ Bug Number: UDevC00169755. QuickTime Reference exports that contained or referenced DNxHD 145 black filler would not fast import. ➤ Bug Number: UDevC00170643. Audio and video were out of sync when performing playback if a Fast Track was connected. 20 Fixed in v6.0.3 and v10.0.3 ➤ Bug Number: UDevC00170489. (Macintosh) Occasionally, using the Trim Right and Trim Left buttons resulted in extra trims. ➤ Bug Number: UDevC00158145. (Avid Color) Performance degraded if Safe color warnings and Waveforms were displayed. ➤ Bug Number: UDevC00156431. Transition manipulation did not work when Trim Settings were set to auto focus. ➤ Bug Number: UDevC00156644. The Quick Transition button on the keyboard did not revert back to Dissolve if there was no transition on the current cut. ➤ Bug Number: UDevC00170547. Using ALT with keyboard shortcuts was not working properly. ➤ Bug Number: UDevC00168421. (Macintosh) In some instances, Pan & Zoom imported JPEG files with inverted colors. ➤ Bug Number: UDevC00170770. When a drive was offline only the drive letter appeared for the clip in the bin. Now the drive letter and drive name appear. ➤ Bug Number: UDevC00169892. When working in the Japanese OS, the fonts list did not display properly. ➤ Bug Number: UDevC00171173. Performing an Update from Interplay intermittently caused transition effects to unrender. ➤ Bug Number: UDevC00170036. Pressing Enter when in the Marker Window text field launched the individual marker window. ➤ Bug Number: UDevC00171224. The Divide symbol on the Avid Calculator did not display properly. ➤ Bug Number: UDevC00170774. You could not copy and paste locators to a 23.976 clip in a 30i project. ➤ Bug Number: UDevC00146069. Selecting Alt + T (Mark Clip) did not highlight the correct section of the Timeline. ➤ Bug Number: UDevC00170834. The ISIS workspaces were indexing every time you launched the editing application. 21 Fixed in v6.0.3 and v10.0.3 ➤ Bug Number: UDevC00170771. If you opened a bin or tool within the editing application and then clicked the X close button but then moved away from the X without releasing the mouse, the bin or tool closed. Now the bin or tool window does not close if you move away from the X without releasing the mouse button. ➤ Bug Number: UDevC00170315. In some instances, transition effects on 10-bit 4:4:4 media caused vertical shifts in the video. ➤ Bug Number: UDevC00169891. You might have experienced delays when performing audio scrub. ➤ Bug Number: UDevC00166986. You could not kern text properly with keyboard shortcuts in the Title Tool. ➤ Bug Number: UDevC00169410. (NewsCutter) The “Allow passthrough during preroll” and “Play LTC during Preroll” options overlapped one another in the Digital Cut tool. ➤ Bug Number: UDevC00170314. Effects did not render properly on 10-bit 4:4:4 media. ➤ Bug Number: UDevC00170261. After a Sapphire effect was rendered, the background of the clip disappeared. ➤ Bug Number: UDevC00168932. When transcoding AMA media, the Convert Video checkbox in the Transcode window was grayed out. The video was actually converted, but the User Interface did not let you select the option. ➤ Bug Number: UDevC00167790. You could perform source side editing in the Timeline. The editing application will now beep if you try to perform a source side edit in the Timeline. ➤ Bug Number: UDevC00168842. Stopping play by clicking in the Timeline did not move the blue bar to the clicked position. ➤ Bug Number: UDevC00157879. Performing a replace edit ignored marks if Show Marked Region was disabled in the Timeline settings. Marks are no longer ignored when performing a replace edit. ➤ Bug Number: UDevC00169627. If you locked tracks in a sequence in the Timeline and then saved and closed the bin, the tracks were not locked when you reopened that sequence. ➤ Bug Number: UDevC00170863. A bin with Script view, saved as a bin layout did not display the script properly when reopened. 22 Fixed in v6.0.3 and v10.0.3 ➤ Bug Number: UDevC00170802. The editing application might have crashed if you imported an ALE file. ➤ Bug Number: UDevC00170768. The frame count display at the bottom of the Composer was corrupt when moving a clip left or right in segment mode. ➤ Bug Number: UDevC00169563. The keyboard settings did not show the actual key positions for foreign keyboards. ➤ Bug Number: UDevC00170169. (1080p 25 projects) Creating an autosequence with clips that contained markers resulted in a sequence without the markers. ➤ Bug Number: UDevC00170480. In some instances, tracking information was lost after closing and reopening a project. ➤ Bug Number: UDevC00169949. You might have received “Assertion failed” errors when importing QuickTime Pro Res files. ➤ Bug Number: UDevC00169916. You might have received “Assertion failed” errors when AMA linking to Canon or P2 files on MediaNetwork. ➤ Bug Number: UDevC00170573. You could not create freeze frames on stereo clips. ➤ Bug Number: UDevC00167710. You could not batch import an .M2T files that had been created in an earlier version of the editing application, for example Media Composer v4.x. ➤ Bug Number: UDevC00169334. (Interplay) After checking in and out a sequence containing rendered audio effects, the effects appeared unrendered. ➤ Bug Number: UDevC00169634. (NewsCutter) If a story in the NRCS tool had a leading or trailing space, you would receive an “invalid path” exception error. ➤ Bug Number: UDevC00169316. Drag and Drop export would fail when exporting multiple AAF files at a time. ➤ Bug Number: UDevC00169888. Magic Mask would disable the color correction. ➤ Bug Number: UDevC00169766. You might have received an “assertion failed” error when trying to perform an expert decompose after Interplay checkin/checkout or AAF import/export. ➤ Bug Number: UDevC00170227. (NewsCutter) Creating a new sequence and choosing a new bin as its destination resulted in odd highlights across the upper and right side borders of the bin. 23 Fixed in v6.0.3 and v10.0.3 ➤ Bug Number: UDevC00163795. You might have received an error when trying to import a sequence containing dissolves into EDL Manager. ➤ Bug Number: UDevC00169422. If you added DNxHD 220 to the DisabledRes.txt file, you could not export a sequence containing filler to QuickTime. ➤ Bug Number: UDevC00169959. If multiple users were working with the same currently ingesting EWC Interplay Capture clip, and the clip was transcoded to a different resolution on one editing system, it might show the ‘capture in progress’ slide for the last few seconds of the areas that had been transcoded when checked out and played on a second editing system. ➤ Bug Number: UDevC00159659. Creating a new sequence when multiple bins were open or by right clicking in the Timeline window did not highlight the name field of the new sequence. ➤ Bug Number: UDevC00169960. You might have received an “Assertion failed” error when performing an Audio Punch-in when Post Roll was set to a value other than 0. ➤ Bug Number: UDevC00169620. You might have received “End of File” errors when rendering effects on Frame Chase captured clips in the Timeline. ➤ Bug Number: UDevC00169961. If a P2 clip was imported twice, the duration of the clip appeared doubled. ➤ Bug Number: UDevC00155906. (Interplay) In some instances, checked out sequences that contained previously rendered effects needed to be rerendered. ➤ Bug Number: UDevC00170182. Splicing segments into an empty sequence checked out from the Interplay Window might have resulted in an “Assertion failed” error. ➤ Bug Number: UDevC00167823. When using non-default audio scrub in 1080p23 projects, when you were parked on a frame, the previous frame was actually displayed. ➤ Bug Number: UDevC00169612. When performing a stereoscopic 3D capture with AVC-I codec, you might have received a “PassThroughManager” exception error. ➤ Bug Number: UDevC00169502. Using the RAMI USB Mixer for recording a voiceover might have resulted in several frames offset. ➤ Bug Number: UDevC00168589. Playing back XDCAM resulted in occasional “AECIFS-Failed to copy all bytes” errors. ➤ Bug Number: UDevC00166272. When moving tracker data points out of a zoomed out frame, the area displayed white. 24 Fixed in v6.0.3 and v10.0.3 ➤ Bug Number: UDevC00167713. A default 10 pixel border was applied to 3D Warp effects. The default border is no longer applied. ➤ Bug Number: UDevC00168598. When working in PAL projects, some SD and HD proxy resolutions were missing from the dynamic relink pulldown menu. ➤ Bug Number: UDevC00165445. You could not select a border color for a 3D Warp effect. ➤ Bug Number: UDevC00168599. When working in PAL projects, some SD and HD proxy resolution dots did not display in the bin column even though the resolution was available. ➤ Bug Number: UDevC00169653. (Symphony - Color Correction) In the previous releases of Symphony, Src Color Correction relationships changed when a related clip (not matching the original Source relationship type) was modified. With this release of Symphony, an existing Src Color Correction relationship will only be modified by a separate Src Color Correction relationship if the Src relationship types match exactly. ➤ Bug Number: UDevC00169071. (Macintosh) When in an Interplay environment, if the Media Indexer was not available and you tried to launch the editing application and then tried to quit the application, you would receive a “Segment fault” error. ➤ Bug Number: UDevC00168521. (NewsCutter) Setting a Mark In or Mark Out on a sequence in the NRCS tool did not work. ➤ Bug Number: UDevC00168341. Pressing Ctrl + . did not stop audio waveform redraw. ➤ Bug Number: UDevC00160455. Grouping clips by Aux Timecode was not working properly. ➤ Bug Number: UDevC00169616. Tabbed lists are now displayed correctly in FilmScribe. ➤ Bug Number: UDevC00169848. Occasionally, a batch capture resulted in an “Assertion failed: ssLayoutStereoscopicLayout_Full File” error. ➤ Bug Number: UDevC00168303. You could not copy and paste a title in the Title Tool by selecting the title with the selection arrow, pressing Ctrl + C to copy and Ctrl + V to paste. ➤ Bug Number: UDevC00169523. Clipboard content did not appear in the Source monitor when you selected Clipboard Contents. ➤ Bug Number: UDevC00169569. The Audio Mixer tool displayed audio faders on tracks that did not have audio. 25 Changed in Media Composer v6.0.1, Symphony v6.0.1 Changed in Media Composer v6.0.1, Symphony v6.0.1 The folder structure of the Macintosh DVD has been updated. The folder structure now includes an Additional Files folder where folders such as Codecs, Goodies, and the Production Suite reside. Fixed in Media Composer v6.0.1, Symphony v6.0.1, and NewsCutter v10.0.1 The following were fixed in this release of the editing application. ➤ Bug Number: UDevC00152291. AMA linked Omneon XDCAM files produced audio corruption during playback. This has been fixed with the latest AMA MXF plug-in. You can find the latest plug-in at www.avid.com/ama. ➤ Bug Number: UDevC00165318. You might have received a “PMM_MISMATCH_AUDIO_FORMAT” error when loading Omneon MXF LongGOP media. This has been fixed with the latest AMA MXF plug-in. You can find the latest plug-in at www.avid.com/ama. ➤ Bug Number: UDevC00167611. (Macintosh) The Undo/Redo list contained extraneous numbers. 26 Fixed in Media Composer v6.0.1, Symphony v6.0.1, and NewsCutter v10.0.1 ➤ Bug Number: UDevC00167643. Previously, foreign language keyboards were not recognized by the editing application. ➤ Bug Number: UDevC00167219. When importing OP1a XDCAM files that had 16 tracks of audio, only 8 tracks were imported. With this release, 16 tracks of audio are imported. ➤ Bug Number: UDevC00166502. (Macintosh) You might have received ADM_COREAUDIO_UNDERRUN errors when playing back simple sequences. ➤ A fix has been included in this release to improve the search performance when you are in an Avid shared storage environment. In order for this fix to take effect, you must delete the SearchData folder that is located in the following sample location: ISISworkspace\Avid_Project\ComputerClientName\SearchData folder. The project must be closed when you delete this folder. Deleting this folder removes all search information including PhraseFind. This information will be rebuilt the next time you open the project. ➤ Bug Number: UDevC00167089. Bin layouts might not have saved correctly. ➤ Bug Number: UDevC00166739. Occasionally, the editing application would crash when quitting the application. ➤ Bug Number: UDevC00166670. You might have received an error when reopening the Media Tool if you had not closed the Media Tool before exiting a project. ➤ Bug Number: UDevC00163566. You might have received an “Asserting_Name_Max_Len” error when typing more than 27 symbols in a Japanese locale. ➤ Bug Number: UDevC00165571. (Macintosh) The keyboard settings were not mapping properly with foreign keyboards. ➤ Bug Number: UDevC00166734. You might have received an Assertion error after performing an auto correction when in Color Correction mode. ➤ Bug Number: UDevC00166524. You might have received a “Runtime” error when dragging a closed bin from the Project window to an opened bin window. ➤ Bug Number: UDevC00166305. When in Color Correction mode, the parameter sliders did not display properly. ➤ Bug Number: UDevC00166628. If you used the tab key to navigate through the workspaces dropdown menu, you might have received a Segmentation fault error. 27 Fixed in Media Composer v6.0.1, Symphony v6.0.1, and NewsCutter v10.0.1 ➤ Bug Number: UDevC00155359. Attic files were not being deleted after the maximum number of files was reached. The maximum attic files number is set in the Bin Settings window. If you have a project attic that is over the maximum setting by a small number of files, the next time you perform a save after installing this patch, the excess attic files will be deleted (oldest files first) and a thermometer will appear showing the deletion progress. If you have a project attic that is significantly over the maximum files setting, the next time your perform a save after installing this patch, the editing application will rename the existing project attic with a “__OLD” name and a new project attic will be created. A dialog will be displayed stating that the attic has been renamed and lists the path to the renamed folder. Customers are responsible for verifying the contents of the “__OLD” attic folder and for deleting it to free up disk space. The newly created project attic will adhere to the maximum setting in the Bin Settings window. The settings affect the file count for project-level attics. The overall Avid Attic can be significantly higher, depending on the number of projects stored on the system. Note that these settings are per project and not for the entire attic folder. The entire Attic folder has multiple projects. Option Description Maximum files in a Defines the maximum number of files stored in the Avid Attic folder for each project. project’s attic When a bin or script is saved, your Avid editing application copies the current version of the bin or script to a subfolder within the special folder called the Avid Attic. Each project has its own subfolder and each bin or script saved in a project has its own subfolder within the project folder. The default is 1000 files per project. The overall file count for the entire Avid Attic will reflect the files stored for each project on the system. Max versions of a file in the attic Defines the maximum number of single-bin or script copies stored in a project's attic. This setting prevents filling the project's attic with too many versions of one bin or script. The default is 50 versions. ➤ Bug Number: UDevC00165318. When loading an Omneon MXF file, you might have received a PMM_MISMATCH_AUDIO_FORMAT error. Update to the latest MXF AMA plugin. ➤ Bug Number: UDevC00165978. You could not enter pan values in the pan value field in the Audio Mixer tool. ➤ Bug Number: UDevC00165149. (Windows) The infinity dB symbol in the Audio Mixer tool displayed as a square. ➤ Bug Number: UDevC00166126. You can now move a folder into another folder when in the Project Window. 28 Fixed in Media Composer v6.0.1, Symphony v6.0.1, and NewsCutter v10.0.1 ➤ Bug Number: UDevC00149254. Performing a drag and drop from a bin to the desktop did not work. This has been fixed for Windows systems. ➤ Bug Number: UDevC00165182. (Macintosh) The spacing between text characters (kerning) was not consistently readable throughout the user interface. ➤ Bug Number: UDevC00164726. You might have received a “WM_WRITE_SAMPLE_Failed” error when exporting Windows Media (.wmv) files. ➤ Bug Number: UDevC00165107. (XDCAM) You might have received a “freed object” error when modifying AMA resolutions on a sequence with multiple cuts from the same clip. ➤ Bug Number: UDevC00162897. An “unable to locate the web document” error would occur when saving a FilmScribe review when using the Japanese locale. ➤ Bug Number: UDevC00162886. The EDL Manager Get and Send buttons were not selectable when the editing application was running. ➤ Bug Number: UDevC00165599. The right border of the EQ graph would disappear after a redraw. ➤ Bug Number: UDevC00165552. Choosing Reverse Selection from the bin Fast menu, did not reverse the selection. ➤ Bug Number: UDevC00165844. (Nitris DX or Mojo DX) You might have received a “NEMFileWriter Timeout” error when transcoding 1:1 or 1:1 10bit to DNxHD. ➤ Bug Number: UDevC00165502. Fast importing QuickTime movies with Alpha to OMF produced artifacts when in an SD project. ➤ Bug Number: UDevC00165300. Importing graphics or QuickTime movies to 1:1 10bit resolution was not working properly. ➤ Bug Number: UDevC00165108. (Macintosh) With dual monitors and the Macintosh menu bar located on the right hand monitor, accessing and saving workspaces did not work properly. Some windows were drawn off screen. ➤ Bug Number: UDevC00163793. In a MediaNetwork environment, increasing the number of mounted workspaces caused the editing application to slow down. ➤ Bug Number: UDevC00165600. After applying a video or audio effect, opening the Effect editor window might have resulted in an Access violation error. 29 Fixed in Media Composer v6.0.1, Symphony v6.0.1, and NewsCutter v10.0.1 ➤ Bug Number: UDevC00165460. Disabling the “Enable Confidence View” option in the Video Display Settings and then selecting the V track in the Capture Tool might have resulted in an Assertion error. ➤ Bug Number: UDevC00165221. Playing a 3D clip in source color correction mode might have caused “Consistency Check Failure” errors. ➤ Bug Number: UDevC00165305. (Windows) After installing MediaLog, the application would not launch unless the DVD installer was in the tray. The MediaLog installer now requires a reboot after install which fixes the issue. ➤ Bug Number: UDevC00165320. The Composer Window did not minimize and then maximize properly. ➤ Bug Number: UDevC00165795. Switching between bin layouts might have resulted in an Assertion error. ➤ Bug Number: UDevC00165461. Maximizing the editing application and then importing and deleting a clip might have put the editing application into an unusable state. ➤ Bug Number: UDevC00165429. (Macintosh) You might have received a “Segmentation fault” error after switching from a stereoscopic format and adding an effect to a clip that had removed a color correction effect. ➤ Bug Number: UDevC00165418. On some systems, when in trim mode, dragging the trim rollers right and left did not update in the monitors. ➤ Bug Number: UDevC00165262. Occasionally the system would crash if you were in a stereoscopic project and you entered source side Color Correction mode. ➤ Bug Number: UDevC00165306. The Assemble Edit button now appears red when selected. ➤ Bug Number: UDevC00165113. (Windows) You could not correctly resize the Composer window when using two monitors. ➤ Bug Number: UDevC00165084. (Macintosh) You could not resize a newly created bin window. ➤ Bug Number: UDevC00165398. Selecting “Loop selected clips” from the bin Fast menu did not function properly. ➤ Bug Number: UDevC00164508. Double-clicking text such as sequence and clip names did not highlight the text. 30 Fixed in Media Composer v6.0.1, Symphony v6.0.1, and NewsCutter v10.0.1 ➤ Bug Number: UDevC00164402. (Windows) The Composer window would decrease in size when you clicked the maximize button. ➤ Bug Number: UDevC00163709. You might have seen redraw issues when importing. ➤ Bug Number: UDevC00165295. Previously, after creating a new user and new project, then opening the Audio Mixer tool, the title bar of the Audio Mixer tool would open under the topmost file menu. ➤ Bug Number: UDevC00164886. The text in the Comments field in Script view was corrupt. ➤ Bug Number: UDevC00162559. (Macintosh) The Command +’ shortcut now works properly. ➤ Bug Number: UDevC00161169. Moving the Clip high and Clip Low controls (in the Color Correction HSL tab) left artifacts in the User Interface. ➤ Bug Number: UDevC00165271. The Nitris DX hardware has only 8 channels of high quality capture sample rate conversion. Previously, when you captured more than 8 channels of audio when connected to Nitris DX, the sample rate conversion would apply to 8 channels of audio and the other captured channels might result in static. Now if you capture 12 or 16 channel audio from HD-SDI, the editing application requires the sample rate to be 48K, disallowing sample rate conversion. ➤ Bug Number: UDevC00164765. (Windows) When you held down the ALT key while opening a project, the project window opened as its own application. ➤ Bug Number: UDevC00165233. Rolling or crawling titles are now supported with ProRes SD. ➤ Bug Number: UDevC00165371. When recreating title media, the bin size would grow much larger than with previous releases. ➤ Bug Number: UDevC00165315. When performing a batch capture, corrupt media files might have been created if you selected “Optimize for batch capture.” ➤ Bug Number: UDevC00165583. Japanese dialog boxes might have displayed incorrect characters. ➤ Bug Number: UDevC00165419. Clicking on the source side track panel with the source monitor active, activated the record monitor. The source monitor now remains active. ➤ Bug Number: UDevC00162296. (Nitris DX) You might have seen a frame reordering after performing a video mixdown with XDCAM EX material. 31 New in Media Composer v6.0, Symphony v6.0, and NewsCutter v10.0 New in Media Composer v6.0, Symphony v6.0, and NewsCutter v10.0 For information on new features, see the What’s New pdf. Avid Hardware Note Note that with this release of the editing application, we no longer support Adrenaline or Mojo SDI hardware. For more information see http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=385855&NewLang=en&DocType =1079 AMA Plug-ins Just a reminder that only the AMA QuickTime Plug-in is included with your Avid editing application. All other AMA Plug-ins are downloaded and installed separately. See www.avid.com/ama. Before Installing the Editing Application Read through the Installation Guide for Avid Editing Applications. This document ships with the editing application kit. If you did not receive a physical kit, this document is also on the download page and the Knowledge Base. Important: This is a full version of the editing application. You should uninstall the previous build from your system before you install Media Composer v6.0.5, Symphony 6.0.5 or NewsCutter v10.0.5. Notes on Macintosh OS The Avid editing application Macintosh installer switches to 64-bit. Please make sure that your Macintosh Lion v10.7 system supports 64-bit prior to installing and that your current non-Avid applications are compatible to run in 64-bit mode. Notes on Windows 7 OS Note the following topics if you are running the editing application on the Windows 7 OS. 32 Notes on Software Licensing Disabling Desktop Compositing When the Avid editor is launched you might see a dialog box asking you to disable desktop compositing. You can disable it without adversely affecting the Avid editing application. You can choose to disable it and continue with your editing session. The dialog will appear once you relaunch the application unless you disable the option. To disable the desktop compositing: 1. Access the Control Panel. 2. Double-click System. 3. Click Change Settings. 4. Click the Advanced tab. 5. Under the Performance area, click Settings. 6. Uncheck “Enable desktop composition.” The dialog box requesting you to disable desktop compositing does not appear the next time you launch the editing application. Standard User You need to first install the editing application as an Administrator. If you are in a Shared Storage environment, mount your workspaces as an Administrator. You may then log off and log back in as a Standard user, if necessary. Notes on Software Licensing If You Upgrade Your Operating System If you need to upgrade your operating system after you install your Avid editing application, first deactivate your software. After you upgrade your operating system and, if required, reinstall your application, you can reactivate your software. For information on activating and deactivating your software license, see the Installation Guide for Avid Editing Applications. Minimum RAM Recommendation For this release Avid recommends a minimum of 4GB of RAM. Some features might require more RAM and specific hardware. See “Feature Performance” on page 48 for more info. 33 Qualified Hardware and Operating Systems Qualified Hardware and Operating Systems Some features are processor-intensive and require specific hardware. See “Feature Performance” on page 48 for more info. The following tables provide the information on qualified Windows and Macintosh hardware. For 3rd-Party Open IO hardware qualification refer to the manufacturer’s documentation. See the Open IO Frequently Asked Questions document on the Knowledge Base: http://avid.force.com/pkb/articles/en_US/faq/en422991 The following tables also list the qualified Operating Systems. Depending upon your hardware the qualified Operating Systems are: • Windows 7 64-bit SP1(Professional) • (Media Composer and Symphony) Macintosh Lion v10.7.4, 10.7.5, Mountain Lion v10.8.2, v10.8.3, v10.8.4 Lion Permission Information As of Macintosh OS 10.7 Lion, the default permissions for the root level of the system drive are now set to “Read Only” for all users. This prevents the Avid Editing Application from being able to use this drive as a media drive. You will see the drive grayed out in Media Creation settings or as an option for import, mixdown, render, and consolidate/transcode. If you don’t intend to use the system drive for media you can leave it alone. This is ideal in most cases. If you do need to use the system drive, perform the following to change permissions. To change permissions: 1. Click on your system drive (Macintosh HD in most cases) to highlight. 2. From the File menu select Get Info (cmd+I) 3. Click the lock icon in the bottom right to make changes 4. Click on the “Read only” text in the Privilege column next to Everyone and set the privilege to “Read & Write”. You should now be able to see the system drive as a valid media drive. n If you repair permissions on the system drive, they will reset and you will have to repeat this procedure. 34 Qualified Hardware and Operating Systems Macintosh v10.8 and AVCHD If you are working with AVCHD and have Macintosh v10.8 (Mountain Lion) OS installed in your system, the AVCHD folder will appear as a QuickTime icon. You can perform a Link to Volume the same as you did when working with Macintosh v10.7, just note that the folder appears as a QuickTime icon. With v10.8, when performing an AMA Link to File, you must copy the stream files to another location, then perform the AMA Link to File. To AMA Link to File: 1. Access the AVCHD folder. 2. Right+click the AVCHD QuickTime icon and select Show Package Contents. 3. Right +click the BDMV folder and select Show Package Contents. 4. Open the Stream folder and copy the files to another location. 5. Select File > AMA Link to File(s). 6. Select the files you want to link to (the files copied in step 4.) Qualified PC Workstations with Avid Media Composer, Avid Symphony, and Avid NewsCutter The following PC Workstations are qualified with Avid Media Composer v6 and higher, Avid Symphony v6 and higher and NewsCutter v10 and higher. Qualified PC Hardware Graphics Card Qualified OS Supported with HP z800 Dual 6 Core, 2.66 GHz NVIDIA Quadro FX 3800 Quadro 4000 Windows 7 64-bit Software Only Nitris DX Mojo DX HP z800 Dual Quad Core, 2.93 GHz or 2.66GHz NVIDIA Quadro FX 3800 Quadro 4000 Windows 7 64-bit Software Only Nitris DX Mojo DX HP z400 Single 6 Core NVIDIA 3.33 GHz Quadro FX 3800 Quadro 2000 Windows 7 64-bit Software Only Nitris DX Mojo DX HP z400 Single Quad NVIDIA Core, 3.06 GHz or 2.93 Quadro FX 3800 GHz Quadro 2000 Windows 7 64-bit Software Only Nitris DX Mojo DX 35 Qualified Hardware and Operating Systems Qualified PC Hardware Graphics Card Qualified OS Supported with HP z210 Quad Core Quadro 600 Xeon 3.3- E3-1240, 3.4 E3-1270, 3.5 E3-1280 Windows 7 64-bit Software Only HP z200 Intel® Core™ NVIDIA i5-660 3.33 4MB/1333 Quadro 600 Dual-Core Windows 7 64-bit Software Only Dell™ T5500 Dual 6 Core, 2.66GHz NVIDIA Quadro FX 4800 Quadro 4000 Windows 7 64-bit Software Only Nitris DX Mojo DX Dell T5500 Dual, 2.93GHz Quad Core NVIDIA Quadro FX 4800 Quadro 4000 Windows 7 64-bit Software Only Nitris DX Mojo DX Dell T3500 Single 6 Core, 3.2GHz NVIDIA Quadro FX 3800 Quadro 2000 Windows 7 64-bit Software Only Nitris DX Mojo DX Dell T3500 Single Quad Core, 2.93GHz NVIDIA Quadro FX 3800 Quadro 2000 Windows 7 64-bit Software Only Nitris DX Mojo DX HP xw8600 Dual Quad NVIDIA Core, 3.0 GHz Quadro FX 3700 Windows 7 64-bit Software Only Nitris DX Mojo DX Dell T5400 Dual Quad Core, 2.5 GHz or 3.15 GHz NVIDIA Quadro 3700 Windows 7 64-bit Software Only Nitris DX Mojo DX HP xw4600 Core 2 Duo, 3.0 GHz NVIDIA Quadro FX 570 Windows 7 64-bit Software Only Dell T3400 Core 2 Duo, NVIDIA 2.33GHz,or 2.66 GHz Quadro FX 570 Windows 7 64-bit Software Only 36 Qualified Hardware and Operating Systems Qualified PC Notebooks for Avid Media Composer, Avid Symphony, and Avid NewsCutter The following PC Notebooks are qualified with Avid Media Composer v6 and higher, Avid Symphony v6 and higher and Avid NewsCutter v10 and higher. The following applies to the editing system when running on a laptop: • DNxHD capture is only supported on Mojo DX on a Quad core system with hyperthreading enabled. Nitris DX is not supported on laptops. • Capture of 10 bit video for example, DNxHD 185x, is not supported on Mojo DX. • Playback in full quality 10 bit mode is not supported Qualified PC Notebooks Graphics Cards Qualified OS Supported With HP 8760w i7-282Q, i7-2820Q 2.2 or 2.3 GHz NVIDIA Quadro 3000M Quadro 4000M Windows 7 64-bit Software Only Mojo DX HP 8560w, i7-2720Q, 2820Q, 2.2 or 2.3 GHz 17” 1920 x1080 NVIDIA Quadro 1000M Quadro 2000M Windows 7 64-bit Software Only Dell M6600, i7-2720Q, 2820Q, 2.2 or 2.3 GHz 17” 1920 x1080 NVIDIA Quadro 3000M Quadro 4000M Windows 7 64-bit Software Only Mojo DX Dell 4600, i7-2720Q, 2820Q, NVIDIA 2.2 or 2.3 GHz Quadro 1000M 15” 1920 x1080 Quadro 2000M Windows 7 64-bit Software Only Mojo DX HP 8740w X820, X920 Quad i7 (1.73, 2.0 GHz) NVIDIA FX 2800M Windows 7 64-bit Software Only Mojo DX 17" 1920x1200 NVIDIA FX 3800M HP 8540w X720, X820 Quad i7 (1.6, 1.73 GHz) NVIDIA FX 1800M Windows 7 64-bit Software Only Mojo DX NVIDIA FX Dell M6500 i- 820Q, i7-840Q, i7-920X(1.73, 1.87, 2800M 2.0 GHz) NVIDIA FX 17" 1920x1200 3800M Windows 7 64-bit Software Only Mojo DX 15" 1920x1080 37 Qualified Hardware and Operating Systems Qualified PC Notebooks Graphics Cards Qualified OS Supported With HP 8730 2.53 or 3.06 GHz Core 2 Duo NVIDIA Windows 7 64-bit Quadro FX 2700M Quadro FX 3700M Software Only HP 8530 2.53 or 3.06 GHz Core 2 Duo NVIDIA Quadro FX 770M Windows 7 64-bit Software Only Dell 6400 2.53 or 3.06 GHz Core 2 Duo NVIDIA Windows 7 64-bit Quadro FX 2700M Quadro FX 3700M Software Only Qualified Macintosh Workstations for Avid Media Composer and Avid Symphony The following Macintosh Workstations are qualified with the Avid Media Composer v6 and Avid Symphony v6 and higher. Mac Pro systems ship with the 64-bit kernel enabled. In previous releases, you had to toggle to the 32-bit kernel. With v6 and higher, you must run with the 64-bit enabled. Qualified Macintosh Hardware Graphics Cards Qualified OS Supported With Mac Pro “Westmere” Two 2.66GHz 6-Core Intel Xeon (12 cores) ATI Radeon HD 5770 Lion v10.7.4, 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only Nitris DX Mojo DX Mac Pro “Nehalem” 2.66 GHz or 2.93 GHz Dual Quad Core Intel Xeon NVIDIA GeForce GT 120 Lion v10.7.4, 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only Nitris DX Mojo DX Mac Pro “Nehalem” Dual 2.26 GHz Quad Core Intel NVIDIA GeForce GT Lion v10.7.4, 120 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only 38 Qualified Hardware and Operating Systems Qualified Macintosh Hardware Graphics Cards Qualified OS Supported With Lion v10.7.4, 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only Nitris DX Mojo DX iMac 27” Display Quad ATI 6970M Core 3.4 GHz Lion v10.7.4, 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only iMac 27” Display Quad ATI 4850 Core 2.93 GHz Lion v10.7.4, 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only iMac 21.5” Display Dual Core 3.6GHz GeForce 9400 Lion v10.7.4, 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only iMac 27” Display 2.8 GHz 4 GB Quad Core 1066MHz ATI Radeon HD 4850 Lion v10.7.4, Graphics Processor 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only Mac Pro “Harpertown” Dual Quad Core 3.0 or 3.2 GHz NVIDIA GeForce 8800 GT iMac 27” Display Quad ATI 4850 Core 2.8GHz Lion v10.7.4, 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only iMac 20” Display 2.66 GHz Core 2 Duo Lion v10.7.4, 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only GeForce 9400 39 Qualified Hardware and Operating Systems Qualified Macintosh Notebooks for Media Composer and Avid Symphony The following Macintosh notebooks are qualified with the current editing applications. The following applies to the editing system when running on a laptop. • HD Capture on Macintosh notebooks is not supported • Playback in full quality 10 bit mode is not supported Qualified Macintosh Notebook Graphics Cards Qualified OS Supported With MacBook Air 13” 1.7GHz Dual-Core Intel Core i5 or 1.8GHz Dual-Core Intel Core i7 Intel 3000 Lion v10.7.4, 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only MacBook Pro 17" 2.2/2.3/ GHz Quad Core i7 6750M Intel 3000 Lion v10.7.4, 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only Mojo DX (no DNxHD capture) MacBook Pro 15" 2.0/2.2/2.3GHz Quad Core i7 6490M 6750M Intel 3000 Lion v10.7.4, 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only MacBook Pro 15" GT 330M 2.53GHz Dual Core i5 15” or 17” 2.66GHz Dual Core i7 Lion v10.7.4, 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only 17” only - Mojo DX (no DNxHD capture) MacBook Pro 15” or 17” 2.53/2.66/2.8 GHz Core 2 Duo 9400M and 9600M Lion v10.7.4, 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only Mojo DX (no DNxHD capture) MacBook Pro 15” and 17” 2.5 GHz Core 2 Duo 8600M Lion v10.7.4, 10.7.5 Mountain Lion v10.8.2, v10.8.3, v10.8.4 Software Only Mojo DX (no DNxHD capture) 40 Compatibility Chart Compatibility Chart The following table lists the operating system, NVIDIA® driver, QuickTime®, Windows Media™, Avid Interplay®, shared storage, Sony® XDCAM™, Panasonic® P2, and Pro Tools LE® versions that were qualified with the Avid editing applications. Also listed are the third-party applications such as Boris Continuum Complete, Avid DVD by Sonic™, and Sorenson Squeeze®that ship with the editing applications. Item Versions Comments QuickTime Support v7.7.1, v7.7.2 (Windows) v10 X (Macintosh) Note: QuickTime v10X does not include QuickTime Pro options. Windows Media Version Support If you do not have Windows Media Player, access the download at www.microsoft.com. Windows Media Player 12 (for Windows 7) Windows Media export compatibility is subject to Microsoft Windows Media updates. NVIDIA Driver Support v310.90 See Setting up the NVIDIA Card. For setting up the driver for stereoscopic, see the NVIDIA setup info in the Stereoscopic 3D Workflow Guide. Shared Storage Support Avid Unity™ MediaNetwork and Avid Unity ISIS®. See “Shared Storage Support” on page 48. Sony XDCAM driver v2.13 (XDCAM Transfer for Macintosh) The VFAM firmware version is 2.45. The driver can be downloaded from Sony's website http://esupport.sony.com/. Win 7-64 FAM 2.3.2and VFAM 3.0 Panasonic P2 drive (Macintosh) No device support for Lion There is currently no P2 writeback support for Macintosh clients. (Windows 7) Driver version for P2 devices:v2.16 Avid FX v6.0.2 (Windows) Ships with: Avid Media Composer Avid Symphony v6.0.3 (Macintosh) Avid Artist Series (Euphonix) EuControl software v2.5.7 or later See the User’s Guide for information on Artist Series Color setup information. 41 Avid Editing Application Compatibility with Pro Tools Avid Editing Application Compatibility with Pro Tools General Co-Installation Notes: • Install Pro Tools first and then Media Composer. • You must uninstall all older versions of Media Composer or Pro Tools before installing newer versions. • Co-install does not support both applications launched simultaneously. • When you uninstall Pro Tools, choose to uninstall just the application and not the audio drivers or the editing application no longer sees the devices. On a Macintosh Pro Tools system, this is named the “Safe Uninstall.” On a Windows Pro Tools system, you must select the first uninstall option — “Pro Tools Only” — which is not selected by default. • (Macintosh only) When you uninstall your Avid editing application, you must uninstall just the application and not the audio drivers or Pro Tools no longer sees the devices. When you start the Avid Uninstaller, deselect the options to uninstall AvidCoreRuntime.pkg and AvidDIORuntime.pkg. • Mojo SDI will not be supported with Media Composer, but can still be connected in a co-install configuration for use with Pro Tools. • If you install and configure Avid Mojo DX or Nitris DX hardware on your system, the editing application does not use any connected Pro Tools audio device for audio input/output operations. You can also use these audio devices with a software-only version of your Avid editing application (Media Composer and NewsCutter). • If you run into any issues, uninstall both applications and reinstall Pro Tools first, and then reinstall your editing application. • Media Composer v5.0 and later and Pro Tools v8.0.3 and later do not include support for the Original Mbox. If you want to use the Original Mbox, you should use Media Composer v4.x and Pro Tools v8.0.1 instead. • If you want to install your Avid editing application on a system with the Pro Tools Avid Video Engine installed, you must use one of the following configurations: - Media Composer v5.5/NewsCutter v9.5 and later with Pro Tools v9.0 or later. - Media Composer v5.0.x/NewsCutter v9.0.x with Pro Tools v8.5 or earlier. 42 Co-installation Configurations and Audio Device Support Co-installation Configurations and Audio Device Support Avid Pro Tools Applications MC/NC Software Only MC/NC with Mojo DX MC/NC/ Symphony with Nitris DX Pro Tools Software Only Co-install Co-install Co-install Pro Tools|HD Native Co-install/ Co-install Audio Device Co-install Pro Tools|HD Co-install/ Co-install Audio Device Co-install Pro Tools|HD, with chassis Not Tested Not Tested Pro Tools Product Not Tested Avid Mbox Family Audio Devices (3rd Generation) Audio MC/NC Device Software (Interface) Only MC/NC with Mojo DX MC/NC/ Symphony with Nitris DX Mbox (USB) Co-install/ Co-install Audio Device Co-install Mbox Pro Co-install/ Co-install Audio Device Co-install Mbox Mini (USB) Co-install/ Co-install Audio Device Co-install Avid Mbox 2 Family Audio Devices Audio MC/NC Device Software (Interface) Only Mbox 2 (USB) MC/NC with Mojo DX Co-install/ Co-install Audio Device 43 MC/NC/ Symphony with Nitris DX Co-install External Controllers Audio MC/NC Device Software (Interface) Only MC/NC with Mojo DX MC/NC/ Symphony with Nitris DX Co-install Co-install Mbox 2 Co-install/ Co-install Mini (USB) Audio Device Co-install Mbox 2 Micro (USB) Co-install Not tested MC/NC with Mojo DX MC/NC/ Symphony with Nitris DX Mbox 2 Pro Co-install (1394) Co-install Other Avid Audio Devices Audio MC/NC Device Software (Interface) Only Digi 002 (1394) Co-install/ Co-install Audio Device (Windows) Co-install Digi 003 (1394) Co-install Co-install Co-install Eleven Rack Not Supported Not Supported (USB) Not Supported Fast Track Pro (USB) Not Supported Audio Device Not Supported External Controllers Your Avid editing application supports the following external fader controllers or mixers for automation gain and pan recording or as control surfaces: • Digi 002 (Windows only — Media Composer and NewsCutter) • Command|8 • Avid Artist Control • Avid Artist Mix • Avid Artist Transport 44 External Controllers n • Avid Artist Color • JL Cooper MCS-3000X MIDI automation controller • JL Cooper FaderMaster Pro MIDI automation controller • Yamaha® 01V/96 and Yamaha 01V digital mixing console The JL Cooper controllers and Yamaha mixing consoles do not support automation pan recording. External controllers or mixers are optional. They are not required for you to perform automation gain or pan recording on an Avid editing system. The following table compares Avid external controllers and mixers. Feature Digi 002 (MC/NC only) Avid Artist Avid Artist Avid Artist Command|8 Control Mix Transport Control surface Yes for transport controls and other functions Yes Yes Yes Yes (transport only, no soft keys) Provides audio Yes play, input, and output No No No No Record Yes automation gain Yes Yes Yes No Record Yes automation pan Yes Yes Yes No Flying faders Yes (8) Yes (4) Yes (8) No Touch-sensitive Yes faders Yes Yes Yes No Touch-sensitive No panners No Yes Yes No Solo/mute Yes Yes Yes Yes No Supports audio mixing Noa No No No No Latch mode (also known as Snap mode) Yes Yes Yes Yes No Yes (8) 45 Avid Artist Color External Controllers Feature Number of steps of fader accuracy Digi 002 (MC/NC only) Avid Artist Avid Artist Avid Artist Command|8 Control Mix Transport 1024 1024 1024 1024 Avid Artist Color Not applicable a. The Digi 002 can be used as a standalone audio mixer but not at the same time as it is being used as an automation gain or automation pan controller or control surface. The following table compares supported third-party external controllers and mixers. Feature FaderMaster Pro MCS-3000X Yamaha 01V/96 and Yamaha 01V Control surface for transport controls and other functions No No No Provides audio play, input, and No output No No Record automation gain Yes Yes Yes Record automation pan No No No Flying faders No Yes Yes Touch-sensitive faders No Yes No Solo/mute Yes Yes Yesa Supports audio mixing No No Yes Latch mode (also known as Snap mode) No Yes No Number of fader steps of accuracy 128 1024 256 a. For Yamaha fader/controllers, solo works only if you do not use the unit for audio mixing at the same time For more information on using these external fader controllers or mixers, see “Recording Automation Gain or Automation Pan Information” in the Help. 46 Setting up the NVIDIA Card Setting up the NVIDIA Card To set up the NVIDIA card, you must make sure you have the correct display driver version (install the display driver if necessary, and set the correct display settings. This version of the editing application requires the following Nvidia Driver: v310.90 Prior to setting up the NVIDIA card, check to make sure you have the correct display driver version. If you do not have the correct NVIDIA driver, you can install it from the Utilities folder that installs with your Avid application. Installation files for these drivers are installed in the folder Program Files\Avid\Utilities\nVidia. To check the NVIDIA display driver version: 1. Right-click the Desktop and select NVIDIA Control Panel. You can also open the Windows Control Panel and double-click the NVIDIA Control Panel icon. 2. Click System Information at the bottom left corner of the NVIDIA Control Panel. The version number is listed in the Graphics card information section on the ForceWare version line. To install the NVIDIA display driver: 1. Navigate to Program Files\Avid \ Utilities \nVidia and double-click the folder that corresponds to your operating system. 2. Double-click the file for the applicable driver. 3. Follow the on-screen instructions, and then restart your system. To setup multiple displays: 1. Right-click the Desktop, and select Nvidia Control Panel. 2. In the settings window in the left of the window, click Set up multiple displays. 3. Select or deselect the desired monitors listed. To set Desktop Video Editing Mode: 1. Right-click the Desktop, and select Nvidia Control Panel. 2. In the menu bar, select Desktop. Enable Desktop>Video Editing Mode. 3. Click Apply. To set the Prefer Maximum Performance mode and Global Settings: 1. Right-click the Desktop, and select Nvidia Control Panel. 2. Click Manage 3D Settings. 3. Set Global presets to Base profile. 47 Shared Storage Support 4. In the Global Settings tab, change Power Management mode to Prefer Maximum Performance. 5. Click Apply. 6. Set the Global preset to 3D App-Video Editing. 7. Click Apply. Reboot after installing the Nvidia software even if you are not prompted to do so. Never use the Windows “roll back driver” feature on the Nvidia driver. The driver version must match the rest of the components the Nvidia installer installs. Shared Storage Support The editing application has been tested in a shared storage environment with the following. Note that ISIS 7000 was previously referred to as Avid Unity ISIS. There is no support for ethernet attached clients in a MediaNetwork environment. Editing Application Operating System ISIS 5000 Client ISIS 5000 Server ISIS 7000 Client ISIS 7000 Server MediaNetwork Client MediaNetwork Server Windows 7 64-bit v3.5, v4.0, v4.2 v3.2, v4.0 v3.5, v4.0, v4.2 v2.4, v4.0 v5.4 v5.1.3 Macintosh v10.7.4, v10.7.5, v10.8.2, 10.8.3, 10.8.4 v3.2, v4.0 v3.5, v4.0, v4.2 v2.4, v4.0 v5.5 v5.1.3 v3.5, v4.0, v4.2 Feature Performance A number of features in this editing application are processor-intensive. As a result, you might experience problems if you are working on an older system. The following chart shows the hardware that Avid has successfully qualified when using these features. 48 Feature Performance Feature Description Stereoscopic 3D For optimal performance with • Stereoscopic 3D, use these higher performance systems. Avid recommends a minimum of 12GB • RAM when using Stereoscopic 3D. • XDCAM HD50 Capture HD RGB Recommended System Baseband capture through Nitris DX, Mojo DX HP z400, 6-core with Hyperthreading On Dell T5500 Dual, 2.93GHz Quad Core with Hyperthreading On • Mac Pro Dual 6 Core “Westmere” • HP z800 Dual Quad Core, or Dual 6 Core, with Hyperthreading On • HP z400, 6-core with Hyperthreading On • Dell T5500 Dual, 2.93GHz Quad Core with Hyperthreading On • Mac Pro Dual Quad Core “Nahalem” or Dual 6 Core “Westmere” HD RGB capture requires a high • end workstation with Nitris DX and fast storage. (The HP z800 and the Dell T5500 have been • qualified to successfully play back 2 streams with PIP and Color Correction effects. The Mac Pro Dual Quad Core “Nahalem” • successfully plays back 2 streams with PIP.) • 49 HP z800 Dual Quad Core, or Dual 6 Core, with Hyperthreading On HP z800 Dual Quad Core, or Dual 6 Core, with Hyperthreading On - 64-bit OS Dell T5500 Dual, 2.93GHz Quad Core with Hyperthreading On 64-bit OS Mac Pro Dual Quad Core “Nahalem” or Dual 6 Core “Westmere” Storage: 10Gb Ethernet ISIS, Feature Performance Feature Description Recommended System AMA (RED) AMA is a processor intensive operation. Older platforms may not offer optimum performance. • HP z800 Dual Quad Core, or Dual 6 Core, with Hyperthreading On • HP z400, single 4-core or 6-core with Hyperthreading On • Dell T5500 Dual, 2.93GHz Quad Core with Hyperthreading On • Mac Pro Dual Quad Core “Nahalem” or Dual 6 Core “Westmere” AMA (QuickTime) AMA is a processor intensive operation. Lower end platforms may not offer optimum performance. Highly compressed codecs such as H.264 will exhibit minimal real-time performance. 50 Recommendation of qualified systems depends on your planned use of this feature. Heavy usage of highly compressed codecs requires the high end systems. Feature Performance Feature Description Recommended System AVCI-Intra AVC-Intra(AVC-I) is a high 4-Way MultiCam Playback quality, low bit-rate HD codec and • HP z800 Dual Quad Core or is very CPU intensive. Dual 6 Core, with Hyperthreading On - 64-bit OS • Mac Pro Dual Quad Core “Nahalem” or Dual 6 Core “Westmere” Four Stream Playback: • HP z800 Dual 6 Core with Hyperthreading On - 64-bit OS • Mac Pro Dual 6 Core “Westmere” Two Stream Playback: • HP z400, single 6 Core with Hyperthreading On Single Stream Playback: 51 • Systems listed above. • HP z400, single 4-core with Hyperthreading On • HP 8600, dual 4-core without Hyperthreading On • HP 8740w laptop, i7 (1.73GHz) 4-core with Hyperthreading On • HP 8540w laptop, i7 (1.73GHz) 4-core with Hyperthreading On • Dell Precision M6500 laptop, i7 (2.00 GHz) 4-core with Hyperthreading On • The MacBook Pro 17" laptop, i7 (2.66 GHz) 2-core with Hyperthreading On • iMac 27", i7 (2.8GHz) 4-core with Hyperthreading On Limitations Feature Description Recommended System Ancillary Data Ancillary Data and Nitris DX: Dual Quad Core or dual 6-core Due to software DNxHD codec Systems performance requirements, you must have a dual quad core system in order to capture DNxHD 220 or 220x with ancillary data on the Nitris DX platform. If your system does not meet the system requirements, the only way to capture DNxHD 220 or 220x is to make sure that ancillary data is not enabled. DVCPro HD capture You will get better performance with a dual quad core or dual 6-core system. Dual Quad Core or dual 6-core Systems Limitations The following limitations apply to the current version of the editing application. Avid Artist Color ➤ Bug Number: UDevC00157064. Some soft keys do not light up when you use the Avid Artist Color with your Avid editing application, including the following: • HSL Shift Layer: all soft keys • HSL Bank 2 Shift Layer: all soft keys • Curves: F8 and F9 soft keys • Curves Shift: F1, F3, F6, and F9 soft keys • Secondary: F2, F7, F8, and F9 soft keys • Secondary Shift: all soft keys The soft keys listed above function normally even when they do not light up. ➤ Bug Number: UDevC00158145. When you use the Artist Color controller to perform color corrections, the Avid editing application might show some degradation of performance when safe color warnings are displayed. If you turn on safe color warnings and then perform a color correction, you might notice that the movement of the cursor becomes uneven. 52 Limitations Workaround: If you experience slower or uneven performance, turn safe color warnings off before you perform your color corrections. ➤ Bug Number: UDevC00163957. Hue offset color wheels might not appear when you use Artist Color to enter Color Correction mode the first time after start your Avid editing application. Any parameter update will draw them. Workaround: When you make any change in a parameter in the Color Correction tool, the color wheels appear. ➤ Bug Number: UDevC00157413. Currently only the Master controls for the Hue Offset and the Controls tabs of the HSL Group in the Color Correction tool are mapped to controls on the Artist Color controller. Hue Offset and Control parameter controls for Shadow, Midtones, and Highlights, as well as the Luma curves are not mapped. You must use the Color Correction tool to adjust these controls. ➤ Bug Number: UDevC00156948. (The F2 soft key (Next HSL Subtab) does not function until after you apply a color correction to your footage. If you press F2 (Next HSL Subtab) on the Artist Color surface before you apply a color correction, you get a system beep and the subtab does not change. ➤ Bug Number: UDevC00157932. If you use the HSL shift control for trackballs, you might see the trackballs controlling the wrong monitor during shuttle. For example, if you press Shift and then use the right trackball to shuttle, and then move either the left or the center trackball, you might see the other trackballs now control the right monitor. ➤ Bug Number: UDevC00158145. You might notice slower or uneven performance when making color corrections with safe color warnings turned on. Workaround: Click one of the Actions buttons in the Safe Color Settings dialog box, and select Ignore to turn safe color warning off. ➤ Bug Number: UDevC00164772. When you first ope n the Color Correction tool, either with the Artist Color or with the mouse, incorrect color correction values might display in parameter fields. This problem is intermittent, and it does not occur after you change a parameter value. Workaround: Adjust any parameter. The correct values display in the Color Correction tool. ➤ Bug Number: UDevC00164954. (Macintosh only): The EuControl application does not open when you select Edit Settings in the Controller Settings dialog box. To configure your EUCON device, you must open the EuControl application by clicking the EUCON icon in the dock, and then selecting Window > EuControl Settings. 53 Limitations Compatibility ➤ Bug Number: UDevC00166431. You might receive AMPI Subsystem errors when launching the editing application. Avid recommends that you refer to the following Knowledge Base article for information on possible causes. http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=377091 ➤ Bug Number: UDevC00151588. You must have the MediaNetwork client installed on your system in order to play linked AMA clips from the MediaNetwork shared storage. ➤ Bug Number: . The Standalone Transfer Manager will be supported with this release, except for compatibility with Airspeed Classic and Open I/O devices. Effects ➤ Bug Number: . AVX 1 effects are no longer supported and will not be recognized in this latest version of Media Composer. Please contact the respective 3rd-party plug-in vendor for an AVX2 64-bit version of any existing plug-in that you might have purchased. The following Avid AVX1 effects will automatically be promoted to AVX2: • Avid Pan & Zoom • Region Stabilize • RGB Keyer When you load a previously-generated sequence containing one of these effects, they will automatically be promoted to new corresponding AVX2 effects. These effects will not be recognized by earlier versions of Media Composer. ➤ Modifying Pan Values in the Timeline: You can display different pan values in the Timeline for different audio tracks by clicking the Clip Gain/Pan button in the Track Control panel and selecting one of the pan value options. However, if you want to manipulate pan control points (either adding a keyframe or adjusting a keyframe), you must make sure all audio tracks display the same pan values. To do this, Alt+click the Clip Gain/Pan button in the Track Control panel for any audio track and select a pan value option. Export ➤ Bug Number: UDevC00167085. Markers that contain more than 27 characters do not export properly. You might receive an “Invalid File Name” error. 54 Limitations Interplay ➤ Interplay v.2.5 support for native HD 23.976p and HD 24p formats now includes their associated proxy resolutions. For more information refer to the Avid Interplay Best Practices Guide. ➤ Bug Number: . (Interplay) Dynamic relink is not currently supported for media that requires pulldown. Therefore, you can only use it with clips where the media has been acquired at the native frame rate (without pulldown). ➤ Bug Number: . (Interplay) Pro Res formats can only be used by Avid editing applications that are in a non-Interplay environment. For any additional limitations regarding running an Avid editing application in an Interplay environment, see the Interplay ReadMe. ➤ Bug Number: UDevC00164931. (Avid Interplay and Windows 7) Can't locate Media Indexer on Avid editor after first install. After an initial installation of the editor and Interplay support software, the editing application may fail to locate the Media Indexer. This can happen if some of the Avid Service Framework services have not started correctly. Workaround: Open the Workgroup Properties tool on the editor and check whether any of the services are not running. Restart any services as required. Then restart the Avid editing application again. You may have to do this the first few times that you start the editor. After a few times the services will begin starting automatically, even after a reboot. Media Tool ➤ Bug Number: UDevC00164836. If the Media Tool window is set to Frame view, you might experience slow redraw issues when accessing large volumes of shared storage. Output ➤ You cannot control down/cross conversion from the Video Output Tool when in TrueP mode for 1080p projects or when you are in Stereoscopic mode. Workaround: When in stereoscopic mode or have True Progressive output set for 1080p projects, the down-convert and cross-convert options are not available. To output at a rate different than the project format, go to the Format tab and change the output project setting. PhraseFind ➤ Bug Number: UDevC00166649. For best results with PhraseFind, Avid recommends using Avid certified storage solution. 55 Limitations Play ➤ Bug Number: UDevC00164987. After editing for an extended period of time, using the keyboard arrow keys to single step through the sequence might skip frames or move in the wrong direction. Workaround: Minimize and maximize the editing application or change focus to another application and then back to the editor. ➤ Bug Number: UDevC00153838. You might receive an “Exception: The sequence or one of its source elements is too long to be played” error if you have a sequence over 12 hours. QuickTime ➤ Bug Number: UDevC00159820. QuickTime Reference movies are not supported by QuickTime Player X. They are still supported in QuickTime Player 7 on the Macintosh. They are also not supported in QuickTime version 7.6.9 on Windows. Stereoscopic 3D ➤ A software developer's kit is now available for 3rd-party partners who would like to build AMA plug-ins, AVX2 effects, or develop applications that support stereoscopic 3D media/sequences compatible with Avid Media Composer or Symphony. This developer's kit is available on the Avid website. ➤ 720p Stereoscopic projects are not currently supported with Open I/O hardware from 3rd-party vendors. ➤ Bug Number: UDevC00164741. If a rolling title is used in an Over\Under stereo project, you may get the wrong scaling and cropping of lines. ➤ Stereoscopic projects are not supported on Avid Interplay. ➤ Multicam of stereoscopic clips is not supported. 56 Limitations ➤ ➤ NVIDIA 3D Vision • Avid currently only supports the NVIDIA 3D Vision Home bundle (which includes the 3D glasses, emitter hub and display monitor). The 3D Vision Pro has not been successfully tested. • Full screen playback on an NVIDIA 3D Vision monitor is only supported on a Windows system. • Due to an NVIDIA driver issue, the first time that the full screen play window appears, the application will resize to a single monitor. Resize the application as necessary. You can reset your window positions by clicking on a toolset in the menu. Bug Number: UDevC00161499. Ancillary data output is not supported if you are working in full stereoscopic format. Timeline ➤ Bug Number: UDevC00164751. If you have a sequence loaded in the Timeline, and you have waveforms on, clicking or dragging in the Timeline does not stop the waveform from drawing. Workaround: Hold Cmd + . to stop the waveform from drawing. User Interface ➤ Bug Number: UDevC00162819. You cannot copy and paste timecode values into the Source or Record monitors. To enter timecode in the monitors, select the monitor and then type in the appropriate timecode values. ➤ Bug Number: UDevC00164678. You can drag audio keyframes past adjacent audio keyframes. Moving an audio keyframe past another keyframe causes the keyframes to swap values. For example, set volume levels on two audio keyframes: Keyframe A for low volume (left keyframe) and Keyframe B for high volume (right keyframe). If you then drag Keyframe A to the right of Keyframe B, Keyframe A now displays the higher volume level. ➤ Bug Number: UDevC00164360. Open bins with a large number of media objects do not remain open after quitting and then restarting the Avid editing application. This affects bins with over 500 media objects. If you leave a large bin open and then quit the application, when you restart the application the bin is closed. 57 Documentation Changes ➤ Bug Number: UDevC00164995. (Macintosh only) If you load a group clip into the Source monitor while in MultiCamera mode, the monitor displays the clip as if MultiCamera mode is still selected, although the action of loading the group clip actually causes the Avid editing application to enter Source/Record mode. If you play back the clip, you only see the linecut and cannot perform MultiCamera edits. Workaround: To turn off the Multicamera mode display, select Special > Multicamera Mode, and make sure MultiCamera Mode is not selected. ➤ Bug Number: UDevC00165159. (Macintosh only) If you render a sequence containing a title by selecting Clip > Render In/Out or by right-clicking the sequence and selecting Render In/Out, the progress bar displaying the status of the render operation does not update and the application appears to become unresponsive. However, even though the progress bar does not advance, the rendering operation continues. When it completes, the progress bar closes. Documentation Changes The following changes have occurred since the documentation was completed: Help and Documentation Update The following documentation errors will be fixed in the next version of the Help and PDF version of the User Guide. • In the help, the topic “Hardware Support for Standard and Stereoscopic Media” refers to the Matrox Mini02. The reference should be to the Matrox MX02 or Mojito. • In the Help and the User’s Guide, the topic “Avid Pro Tools HD Native Hardware Configuration for Avid Editing Systems” stated “If you use Matrox MX02 Mini hardware or if you have Avid DX hardware installed with your system, you cannot access the Pro Tools|HD Native hardware.” This statement should have read “If you use third party hardware or if you have Avid DX hardware installed with your system, you cannot access the Pro Tools|HD Native hardware.” • In the Assigning Colors to Objects in a Bin topic in the help, the procedure for assigning color to a clip, subclip, sequence, or effect in a bin should not have stated that a selected color should appear on the clip icon. The selected color appears in the Color column in Text view. Making an Audio Track the Primary Active Track To make a track the primary active track, Alt+click the Audio Track Monitor button for the selected track. 58 Documentation Changes Interoperability Enhancements with Avid Interplay Interplay v2.5 supports the following features in the Avid video editing applications: • Media Composer v6.0, Symphony v6.0 and NewsCutter v10.0 64-bit applications (64-bit Framework and 64-bit Media Indexer must be installed) • End-to-end workflow for clips and sequences that include surround-sound audio tracks. • Clips and sequences that use DNxHD444 RGB media. You can check clips and sequences in and out of the Interplay database and manage them as Avid assets. For more details, refer to the Avid Interplay What's New in Version 2.5. Opening and Closing Bins To open several bins at once from the Project window: 1. Click a Bin icon in the Bins list. 2. Ctrl+click (Windows) or Command+click (Macintosh) each additional bin you want to open. 3. Do one of the following: t To open each bin in a separate window, select File > Open Selected Bins. t To open all bins as tabs in a single bin, select File > Open Selected Bins In One Window. The selected bins open either in separate windows or in a single window with tabs indicating the bins. n You can also open multiple bins by dragging them from the Bins tab in the Project window to an open bin. The bins open as tabs in the existing bin. Assigning a Workspace or Bin Layout Button When you assign a workspace or bin layout to a button, the button displays the first two characters of the workspace or layout name. If the assigned workspace or layout is not available — for example, if you deleted the workspace or the bin layout — the button remains visible but the label displays italicized characters. Deck Preferences Setting There is an additional option in the Deck Preferences Setting to “Relax coincidence point detection.” This option is off by default. Depending on the deck, device control hardware or system you are using, marking an In point in the Capture Tool and performing a capture can 59 Documentation Changes result in a “coincidence point detection error.” If you select this option, the editing application is less strict on finding the coincidence point. Note, relaxing the detection can allow captures to succeed but has a greater possibility of capturing from the wrong in-point. 60 Documentation Changes Legal Notices Product specifications are subject to change without notice and do not represent a commitment on the part of Avid Technology, Inc. This product is subject to the terms and conditions of a software license agreement provided with the software. The product may only be used in accordance with the license agreement. This product may be protected by one or more U.S. and non-U.S patents. Details are available at www.avid.com/patents. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the express written permission of Avid Technology, Inc. Copyright © 2013 Avid Technology, Inc. and its licensors. All rights reserved. Portions © Copyright 2003-2007 of MOG Solutions. Attn. Government User(s). Restricted Rights Legend U.S. GOVERNMENT RESTRICTED RIGHTS. This Software and its documentation are “commercial computer software” or “commercial computer software documentation.” In the event that such Software or documentation is acquired by or on behalf of a unit or agency of the U.S. Government, all rights with respect to this Software and documentation are subject to the terms of the License Agreement, pursuant to FAR §12.212(a) and/or DFARS §227.7202-1(a), as applicable. Trademarks 003, 192 Digital I/O, 192 I/O, 96 I/O, 96i I/O, Adrenaline, AirSpeed, ALEX, Alienbrain, AME, AniMatte, Archive, Archive II, Assistant Station, AudioPages, AudioStation, AutoLoop, AutoSync, Avid, Avid Active, Avid Advanced Response, Avid DNA, Avid DNxcel, Avid DNxHD, Avid DS Assist Station, Avid Ignite, Avid Liquid, Avid Media Engine, Avid Media Processor, Avid MEDIArray, Avid Mojo, Avid Remote Response, Avid Unity, Avid Unity ISIS, Avid VideoRAID, AvidRAID, AvidShare, AVIDstripe, AVX, Beat Detective, Beauty Without The Bandwidth, Beyond Reality, BF Essentials, Bomb Factory, Bruno, C|24, CaptureManager, ChromaCurve, ChromaWheel, Cineractive Engine, Cineractive Player, Cineractive Viewer, Color Conductor, Command|24, Command|8, Control|24, Cosmonaut Voice, CountDown, d2, d3, DAE, D-Command, D-Control, Deko, DekoCast, D-Fi, D-fx, Digi 002, Digi 003, DigiBase, Digidesign, Digidesign Audio Engine, Digidesign Development Partners, Digidesign Intelligent Noise Reduction, Digidesign TDM Bus, DigiLink, DigiMeter, DigiPanner, DigiProNet, DigiRack, DigiSerial, DigiSnake, DigiSystem, Digital Choreography, Digital Nonlinear Accelerator, DigiTest, DigiTranslator, DigiWear, DINR, DNxchange, Do More, DPP-1, D-Show, DSP Manager, DS-StorageCalc, DV Toolkit, DVD Complete, D-Verb, Eleven, EM, Euphonix, EUCON, EveryPhase, Expander, ExpertRender, Fader Pack, Fairchild, FastBreak, Fast Track, Film Cutter, FilmScribe, Flexevent, FluidMotion, Frame Chase, FXDeko, HD Core, HD Process, HDpack, Home-to-Hollywood, HYBRID, HyperSPACE, HyperSPACE HDCAM, iKnowledge, Image Independence, Impact, Improv, iNEWS, iNEWS Assign, iNEWS ControlAir, InGame, Instantwrite, Instinct, Intelligent Content Management, Intelligent Digital Actor Technology, IntelliRender, Intelli-Sat, Intelli-sat Broadcasting Recording Manager, InterFX, Interplay, inTONE, Intraframe, iS Expander, iS9, iS18, iS23, iS36, ISIS, IsoSync, LaunchPad, LeaderPlus, LFX, Lightning, Link & Sync, ListSync, LKT-200, Lo-Fi, MachineControl, Magic Mask, Make Anything Hollywood, make manage move | media, Marquee, MassivePack, Massive Pack Pro, Maxim, Mbox, Media Composer, MediaFlow, MediaLog, MediaMix, Media Reader, Media Recorder, MEDIArray, MediaServer, MediaShare, MetaFuze, MetaSync, MIDI I/O, Mix Rack, Moviestar, MultiShell, NaturalMatch, NewsCutter, NewsView, NewsVision, Nitris, NL3D, NLP, NSDOS, NSWIN, OMF, OMF Interchange, OMM, OnDVD, Open Media Framework, Open Media Management, Painterly Effects, Palladium, Personal Q, PET, Podcast Factory, PowerSwap, PRE, ProControl, ProEncode, Profiler, Pro Tools, Pro Tools|HD, Pro Tools LE, Pro Tools M-Powered, Pro Transfer, QuickPunch, QuietDrive, Realtime Motion Synthesis, Recti-Fi, Reel Tape Delay, Reel Tape Flanger, Reel Tape Saturation, Reprise, Res Rocket Surfer, Reso, RetroLoop, Reverb One, ReVibe, Revolution, rS9, rS18, RTAS, Salesview, Sci-Fi, Scorch, ScriptSync, SecureProductionEnvironment, Serv|GT, Serv|LT, Shape-to-Shape, ShuttleCase, Sibelius, SimulPlay, SimulRecord, Slightly Rude Compressor, Smack!, Soft SampleCell, Soft-Clip Limiter, SoundReplacer, SPACE, SPACEShift, SpectraGraph, SpectraMatte, SteadyGlide, Streamfactory, Streamgenie, StreamRAID, SubCap, Sundance, Sundance Digital, SurroundScope, Symphony, SYNC HD, SYNC I/O, Synchronic, SynchroScope, Syntax, TDM FlexCable, TechFlix, Tel-Ray, Thunder, TimeLiner, Titansync, Titan, TL Aggro, TL AutoPan, TL Drum Rehab, TL Everyphase, TL Fauxlder, TL In Tune, TL MasterMeter, TL Metro, TL Space, TL Utilities, tools for storytellers, Transit, TransJammer, Trillium Lane Labs, TruTouch, UnityRAID, Vari-Fi, Video the Web Way, VideoRAID, VideoSPACE, VTEM, Work-N-Play, Xdeck, X-Form, Xmon and XPAND! are either registered trademarks or trademarks of Avid Technology, Inc. in the United States and/or other countries. Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Apple and Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. All other trademarks contained herein are the property of their respective owners. Avid Media Composer, NewsCutter, and Symphony ReadMe • Part Number 0130-30387-02D • 10/2/13 61