Avtrac

Transcript

Architectural Connectivity AVTrac ® LOW PROFILE FLOOR-MOUNT RACEWAY SYSTEM FOR POWER, DATA, AND AV CONNECTIVITY ➤ ADA compliant for slope and rise ➤ Modular enclosure supports power, data, and AV connectivity ➤ Select from hundreds of available Extron AAPs for fully-customizable AV connectivity ➤ AC power modules available The elegant alternative to trenching and floor coring ➤ Choice of carpet channel or rubber inlay strip ➤ UL/c-UL Listed AV T R AC F L O O R - M O U N T R AC E WAY S Y S T E M Introduction The proliferation of technology in the workplace has increased the demand for power, data, and AV signal connectivity. Architects, interior designers, and AV system integrators are often forced to compromise both aesthetics and system designs in order to accommodate preexisting network drops and power outlets. Alternatives, such as poke-through devices and floor boxes, can be too conspicuous, costly, or even prohibited by building owners. With the Extron AVTrac, architects and designers are no longer limited by the placement of wall-mounted power, data, and AV connectivity. AVTrac is a low profile, floor-mounted raceway system with a flexible, modular AAP - Architectural Adapter Plate enclosure for power, data, and AV connectivity. AVTrac offers a discreet, cost-effective alternative to floor coring for poke-through devices, trenching for floor boxes, and raised access flooring systems. It allows power, data, and AV signal connection points to be located wherever they’re needed, with minimal impact on room design or aesthetics. The Extron AVTrac raceway system includes the AAP enclosure, aluminum AVTrac is ideal for use in classrooms, training centers and other reconfigurable raceway, top cap, and side ramps. Optional accessories are available to spaces, and corporate boardrooms, as well as for adding new AV connectivity to customize the system to your installation needs for a professional finish that legacy installations and architecturally sensitive environments. is sure to please the most demanding clients. The patented, low profile AVTrac raceway system meets accessibility standards The modular AAP Enclosure supports all of the hundreds of available Extron for slope and rise as specified by the ADA - Americans with Disabilities Act. Two Architectural Adapter Plates for a fully customizable connectivity solution. Popular 4-foot (1.2 m) tracks combine to create an 8-foot (2.4 m) raceway that can AAPs include USB, HDMI, DisplayPort, VGA and audio pass-through plates; voice, be installed underneath new or existing commercial grade carpet. AVTrac is data, and control pass-through plates; and powered products such as Extron USB available in two versions. The AVTrac 482C accommodates matching carpet in HUB4 AAP and MTP Series twisted pair transmitters. The enclosure provides two the aluminum raceway top cap for use in new installations or installations where double-space and two triple-space AAP openings, sufficient for mounting up to new carpet is being installed. The AVTrac 482R includes a black rubber strip 10 single-space AAPs. Blank plates are also available to cover any unused AAP for installation in the raceway cap and is ideal for retrofit applications. For best openings. Two AVTrac AAP Enclosures can be mounted side-by-side on separate results, installation by a professional carpet installer is recommended. raceways utilizing the optional AVTrac Extra Channel Kit. 3.63 " (9.21 cm) 7.50 " (19.05 cm) AV T R AC F L O O R - M O U N T R AC E WAY S Y S T E M Features Cost-Effective Alternative to Floor Coring and Trenching AVTrac is a cost-effective alternative to pokethrough devices, floor boxes, and raised-access flooring systems. AVTrac provides the flexibility to place AV signal connections where they are needed. The raceway system is ideal for use in new and retrofit applications as well as in architecturally sensitive environments. Fast, Efficient Installation AVTrac can be installed and fully operational in a matter of hours, keeping labor costs and down time to an absolute minimum. ADA Compliant AVTrac complies with ADA – Americans with Disabilities Act standards for slope and rise, and is ideal for use in schools, corporate, government, and retail applications. Easy Access Cover Panel UL/c-UL Listed The AVTrac enclosure features a removable top panel for quick and convenient cable termination and connector installation. AVTrac has been tested by Underwriters Laboratories, Inc. to nationally recognized safety standards. It is also approved for use in New York City by the NYC Dept. of Buildings: Electrical Division. Modular AAP Enclosure AVTrac’s modular AAP Enclosure features openings for two double-space and two triplespace AAPs for a fully customizable connectivity solution. Two AVTrac AAP Enclosures can be mounted side-by-side in separate raceways utilizing the optional AVTrac Extra Channel Kit. The enclosure can accommodate any of the hundreds of available Extron AAPs with popular audio, video, phone, and data connectors, as well as one AVTrac AC Power Module. Additional accessories are available for customization. Inlay Cap Options AVTrac is available in two versions to fit the installation requirements of most environments. The AVTrac 482C features an open channel for customer-selected, unpadded commercial grade carpet between 1/4 inch and 5/16 inch (7 mm to 9 mm) thick to match the surrounding decor. The AVTrac 482C is ideal for use in new installations, and those in which new carpet is being installed. The optional AVTrac Rubber Inlay Kit includes a black rubber inlay that mounts directly in the AVTrac 482C carpet inlay channel. 4.27 " (10.84 cm) 3.70 " (9.40 cm) END VIEW - ACTUAL SIZE AV T R AC F L O O R - M O U N T R AC E WAY S Y S T E M Accessories The AVTrac 482R includes a black rubber inlay strip for installation in the top cap of the raceway. It is ideal for retrofit applications where additional matching carpet is not readily available. AVTrac Cable Pass-Through Kit The AVTrac Cable Pass-Through Kit mounts at the end of an AVTrac Extension Kit and is designed for applications where cables need to be passed from the wall to a hollow table leg, desk, or a fixed lectern location. The Cable Pass-Through Kit can also be used at either end of an AVTrac Extension Kit to allow the seamless transition of cables from one table leg to the other. The Cable Pass-Through Kit minimizes the number of termination points and corresponding signal loss by allowing continuous cable runs between primary connection points within the system. Optional Extension Kit The matching AVTrac Extension Kit includes an additional 4 feet (1.2 m) or 8 feet (2.4 m) of cable raceway and side ramps. It can be easily cut to length as needed and allows power, data, and AV connectors to be placed from 8 feet (2.4 m) to 16 feet (4.8 m) from a wall or other area The AVTrac Extension Kit can be used in combination with the Rubber Inlay Kit. Extra Channel Kit The AVTrac Extra Channel Kit allows the AVTrac system to run two or more cable raceway channels side by side between one set of side ramps. The Extra Channel Kit provides additional raceway capacity for AV cable routing. It is packaged in two 4-foot (1.2 m) sections for a total length of 8 feet (2.4 m). Transition Adapters The Raceway Transition Adapter is designed to work with wall-mounted cable management systems, including Wiremold 4000 Series™ steel raceways. The AVTrac Raceway Transition Adapters are available in matching Wiremold Ivory ScuffCoat™ finish. The AVTrac Retrofit Transition Adapter is designed to provide a smooth transition from the AVTrac floor-mounted raceway to a wallmounted patch panel. It facilitates cable passthrough from wall-mounted AC outlets and AV connection plates to the raceway system. In addition, it provides an alternative solution when base studs cannot be cut due to stringent building codes. AVTrac 482C with matching carpet installed AVTrac 482R with rubber inlay installed AVTrac Extra Channel Kit shown with two enclosures mounted side-by-side .67" (1.70 cm) 7.50 " (19.05 cm) AV T R AC F L O O R - M O U N T R AC E WAY S Y S T E M AVTrac Accessories The Extra Channel Kit allows two or more cable raceway channels to run side by side between one set of AVTrac side ramps. Model Version Description AVTrac INST EXCL Extra Channel Kit for AVTrac Part # Model Version Description 70-671-01 AVTrac 4C EXT AVTrac 8C EXT Extension Kit, 4' (1.2m) – Carpet 70-645-04 Extension Kit, 8' (2.4m) – Carpet 70-645-08 The Wall Trim Plate compensates for minor over-cutting of gypsum wallboards during the installation of an AVTrac raceway system. Model Version Description AVTrac INST WTP Wall Trim Plate for AVTrac Model Version Description Part # AVTrac 8R Inlay Kit Rubber Inlay Kit for AVTrac 70-670-01 The AAP Enclosure is designed for use with the AVTrac FloorMount Raceway System and Extra Channel Kit. The enclosure includes two double-space and two triple-space AAP – Architectural Adapter Plate openings. Part # Model 70-782-01 AVTrac INST RIA Rough-in Adapter for AVTrac Model Version Description Part # AVTrac INST TRANS 100WM Wiremold; Ivory Part # The Rough-in Adapter is a racewayto-base stud cable pass-through that provides a clean transition for routing electrical conduit and AV cables from inside a finished wall into the AVTrac raceway. The Raceway Transition Adapter is designed to work with wall-mounted cable management systems, including Wiremold 4000 Series™ steel raceways. Model The Rubber Inlay Kit provides a durable, 0.22" (5.6 mm) rubber strip for an aesthetic alternative to matching carpet. The Extension is an optional 4' (1.2 m) or 8' (2.4 m) raceway track extension kit for use with the AVTrac Floor-Mount Raceway System. 70-783-01 Version Description Part # 70-781-01 Version Description Part # AVTrac AAP ENCL Holds up to 10 AAPs 70-801-02 The AVTrac Retro Trans Adapter is designed to provide a smooth transition from the AVTrac floormounted raceway to a wall-mounted patch panel. It facilitates cable pass-through from wall-mounted AC outlets and A/V connection plates to the raceway system. The Cable Pass-Through Kit mounts at the end of an AVTrac Extension Kit and is designed for applications where cables need to be passed from the wall to a hollow table leg, desk, or a fixed lectern location. Model Part # Model 70-679-22 AVTrac INST CPT Cable Pass-Through Kit Version Description AVTrac Retro Trans Adapter for AVTrac Version Description Part # 70-714-02 APPLICATION DIAGRAMS LAN Speakers Projector Speakers Wall Mount Cable Raceway Projector Cables run directly from wall to table leg, to furniture connections. Extron Cable Cubby 200 Cable Access Enclosure Extron MLC 226 IP MediaLink Controller with IP Link Holes drilled in table leg. 406MA MLS MediaLink CONTROL PEAK CLIP SIGNAL 6 5 SELECT 4 INPUT 3 2 1 Switcher Extron Raceway Transition Adapter Hollow Table Leg Extron Cable Pass-Through Kit Extron AVTrac Floor Mount Raceway System Table Leg Kit for AVTrac AV T R AC F L O O R - M O U N T R AC E WAY S Y S T E M specifications Specifications Architectural Connectivity Solutions GENERAL Power US models International models Enclosure type 125 VAC, 50/60 Hz, 20 A (max.) 240 VAC, 50/60 Hz, 10 A (max.) Metal track base and top, metal connectivity box and cover, plastic ramps Track system End ramps 0.67" (1.7 cm) H x 9.36" (23.8 cm) radius, approximately 4.5° slope 0.67" (1.7 cm) H x 7.50" (19.0 cm) W on either side of track x 96.0" (243.8 cm) L, approximately 4.5° slope 1.03" H x 3.70" W x 96.0" L (2.6 cm H x 9.4 cm W x 243.8 cm L) 0.95" H x 3.70" W x 96.0" L (2.4 cm H x 9.4 cm W x 243.8 cm L) 3.55" H x 10" W x 4.91" D (9.0 cm H x 25.4 cm W x 12.5 cm D) Side ramps AVTrac 482C track base and top AVTrac 482R track base and top Connectivity box Product weight Parts in package 1 of 2 16.9 lbs (7.7 kg) Parts in package 2 of 2 10.6 lbs (4.8 kg) Shipping weight Package 1 of 2 22 lbs (10 kg) Package 2 of 2 13 lbs (6 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE (international models), CUL, UL (US models) Accessibility Title III, Regulation 28 CFR Part 36: ADA Standards for Accessible Design; Section 4.8: Ramps Warranty 3 years parts and labor Model Version Description Part # AVTrac 482C Carpet Inlay, No AC power 42-155-00 AVTrac 482C Carpet Inlay, w/AC US, Prewired Conduit 42-155-24A AVTrac 482R Rubber Inlay, No AC power 42-156-00 AVTrac 482R Rubber Strip, w/AC US, Prewired Conduit 42-156-24A AVTrac 4C EXT Extension, 4’ (1.2m) - Carpet 70-645-04 AVTrac 8C EXT Extension, 8’ (2.4 m) - Carpet 70-645-08 Extron offers a full selection of complementary Architectural Connectivity accessories for a complete architectural solution to enhance AVTrac FloorMount Raceway Systems. With our easy to use and interactive online Connectivity Configurator, you can design the AVTrac system to fit your client’s exact needs. Extron has hundreds of AAP – Architectural Adapter Plates, making it easy to fully customize the unit to meet the connectivity needs of each installation. Popular AAPs include USB, DisplayPort, DVI, and HDMI; VGA and audio pass-through plates; and voice, data, and control pass-through plates. The Extron Connectivity Configurator is an interactive, drag-anddrop, online tool for designing and customizing architectural connector installations. This tool presents an up to the minute list of every Extron AAP – Architectural Adapter Plate currently available. Users can easily sort through the hundreds of connector options and simply drag and drop their selections into place. The resulting configuration can be printed for inclusion in customer presentations and documentation. Carpet Inlay Channel Rubber Strip Channel AVTrac Extension Kit AVTrac Installation Accessories AVTrac 8R Inlay Kit Rubber Strip Inlay Kit for AVTrac 70-670-01 AVTrac INST EXCL Extra Channel Kit for AVTrac System 70-671-01 AVTrac INST RIA Rough-in Adapter for AVTrac 70-781-01 AVTrac INST CPT Cable Pass-Through Kit 70-714-02 AVTrac INST WTP Finished-Wall Trim Plate for AVTrac 70-782-01 AVTrac RETRO TRANS Retrofit Transition Adapter for AVTrac 70-679-22 AVTrac INST Trans 100WM Wiremold; Ivory 70-783-01 For AVTrac Extra Channel Kit 70-801-02 AVTrac 2AC US Two US Outlets, Prewired Conduit 70-799-08 AVTrac 4AC US Four US Outlets, Prewired Conduit 70-799-09 AVTrac 1AC AUS Australia Outlet, Conduit Only 70-799-05 AVTrac AAP Enclosure AVTrac AAP Enclosure AVTrac AC Power Modules Extron USA - West Headquarters +800.633.9876 Inside USA / Canada Only +1.714.491.1500 +1.714.491.1517 FAX www.extron.com Extron USA - East Extron Europe Extron Asia Extron Japan Extron China Extron Dubai +800.633.9876 +800.3987.6673 +800.7339.8766 +81.3.3511.7655 +81.3.3511.7656 FAX +400.883.1568 +971.4.2991800 +971.4.2991880 FAX +1.919.863.1794 +1.919.863.1797 FAX +31.33.453.4040 +31.33.453.4050 FAX +65.6383.4400 +65.6383.4664 FAX Inside USA / Canada Only Inside Europe Only Inside Asia Only Inside China Only +86.21.3760.1568 +86.21.3760.1566 FAX © 2011 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners. 04-2011 68-1420-01 REV. F