Transcript
AW-GET-080A-120 PoE Switch Quick Installation Guide INTRODUCTION The AW-GET-080A-120 is a GbE unmanaged PoE switch capable of feeding 15.4/30W (per port) power to Power over Ethernet (PoE) devices. The switch is capable of a total of 115 Watts power budget. PACKAGE CONTENTS * 1x PoE switch * 1x rack mount kit
* 1x Quick Installation Guide * 1x power cord (type by the shipped-to area)
IMPORTANT: 1. Install the PoE switch in a ventilated and dry place, that is free electromagnetic source, vibration, moisture, and dust. 2. Make sure the ventilation openings on the switch are not blocked. 3. Use CAT5 or 6 UTP/STP cables. 4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 120W.
CONNECTION Front Panel
Rear Panel PoE cameras / Extenders
ON 100~240V AC O FF
Uplink
Voltage regulator
LED DEFINITIONS ACT
Green ON Fast blinking Off 10/100M Yellow ON Off 1000M Green ON Off PoE Yellow ON OFF
Ethernet port are connected and normal. Data is being transmitted or received. No connection. Ethernet port speed is 100Mbps. Ethernet port speed is 10Mbps. Ethernet port speed is 1000Mbps. No connection. Port is linked to a powered device. No device is connected.
All specifications are subject to change without noice. Copyright © 2015 VIVOTEK INC. All rights reserved.
VIVOTEK INC. 6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C. |T: +886-2-82455282| F: +886-2-82455532| E:
[email protected]
VIVOTEK USA, INC.
VIVOTEK Europe
2050 Ringwood Avenue, San Jose, CA 95131
Randstad 22-133, 1316BW Almere, The Netherlands
|T: 408-773-8686| F: 408-773-8298| E:
[email protected]
T: +31(0)36-5298-434 E:
[email protected]
