Transcript
Wireless Made Simple.
MONITOR SETUP
Phillips head screwdriver or drill may be required for installation
Model AWS225
ALCWireless.com
Tools
Quick
DOCKING STATION
On-screen Display
Internet Router (not included)
x1
SD Card Status
Simple Set Up
(1) Antenna Quick Start Guide
Connect the AC/DC adapter to the power input on the back of the Docking Station and plug into an electrical outlet.
2
Place Monitor onto the Docking Station and extend the antenna. Press and hold the POWER button on the top of the monitor for 3-4 seconds until screen illuminates.
3
Recording Status
Camera Number Signal Status
The CAMERA(s) installed and plugged in will AUTOMATICALLY APPEAR on the Monitor, with or without Internet cable connected to a wireless network router. For remote viewing on smart devices, the Monitor must be connected to Internet. Plug one end of the provided Internet cable into back of Docking Station and the other end into an Ethernet port on router.
NOTE: Avoid installing in a location which requires the wireless signal to pass through cement, concrete and metal structures. This will reduce the transmission range.
AC Power Connection
x1
(1) Screw/Anchor Kit SD Card Slot 8 GB
To prepare for RECORDING, insert the SD card provided into the SD card slot on right side of the Monitor. Most SD card brands are supported up to 32 GB. The SD Card status icon on Monitor will indicate proper installation.
Tip: Plan the location of your cameras for optimal viewing and proximity to AC Power outlets, (2) power extension cables are included AC Power Input (AC power cable included)
Power (On/Off)
x1 (1) power extension cables
ANDROID REMOTE VIEWING
x2
Pull out Stand
(1) 8 GB SD card
4
APPLE REMOTE VIEWING
ANDROID DEVICE SETUP
APPLE DEVICE SETUP
1
From your Android device, DOWNLOAD and INSTALL the free ALC Observer App.
1
From your Apple device, DOWNLOAD and INSTALL the free ALC Observer App.
2
Connect as shown in the Docking Station section, above.
2
Connect as shown in the Docking Station section, above.
3
Turn on the Wi-Fi setting on your Android device and set it to your home network.
3
Tap Set Up Wizard on screen for direct wireless connection of camera to App.
4
Tap Set Up Wizard on screen for direct wireless connection of camera to App.
4
The App will start the connection process.
5
The App will start the connection process. Tap Live View.
5
Once the screen indicates the camera is connected, tap Live View.
Internet (Ethernet) Cable Connection
Reset button
Multi-position Camera Bracket
In-line Pairing Button
Thumb screw AC Power cord Camera Bracket T-Bolt
(2) AC power adapters (1) Outdoor cameras with multi-position brackets
Antenna
Infrared LED sensors
Docking station with Internet cable 4.3”
4.3” Touch screen Monitor
4.3” Touch Screen Monitor
Docking Station
Indoor/Outdoor Camera
Let’s Get Started
IN THE BOX
FREE APP DOWNLOAD
FREE APP DOWNLOAD
NOTE: When the Monitor is placed in the Docking Station and “CHARGE ONLY” is selected, you can still access your live video from smartphone(s) or tablet(s) as long as those devices are also connected to the same network as the Monitor.
FO LD
FO LD
Internet Connection status
Included Ethernet Cable
AC power cable
1
Battery Status
NOTE: Screen shots and icons may vary due to continuous updates to App and software development.
1
Secure the multi-position camera bracket to a stable surface, ceiling or wall.
2
Remote Monitoring Anytime from Anywhere
NOTE: If you are having a difficult time connecting your smart device for remote viewing, please visit www.ALCWireless.com/support to view the latest guides.
Loosen the T-Bolt on the camera bracket and adjust viewing angle using the Thumb Screw to rotate position.
NOTE: Cameras are IP66 rated for indoor/outdoor use. For outdoor use it is recommended to install camera under shelter to protect from direct exposure to sunlight and other environmental elements. Avoid pointing a camera directly at any bushes or tree branches or objects that may naturally move due to winds.
Wireless Video Surveillance System with 4.3” Touch Screen Monitor
RECORDING FROM SMART DEVICE + MONITOR FROM SMART DEVICE
MOTION RECORDING FROM MONITOR
1
2
From Pop-Up menu, tap the following icons
Tap the camera’s Sensitivity to OFF, LOW or HIGH (default is LOW).
PAIRING ADDITIONAL CAMERAS TO MONITOR
1
SNAPSHOTS: From LIVE VIEW , tap CAMERA Icon to capture screen images from camera selected. Snapshots will be saved to camera roll of your mobile device.
2
RECORDING: Tap RECORD icon system’s SD Card.
The AWS225 Wireless Surveillance System supports up to four (4) wireless surveillance cameras. Use the following steps to pair each additional camera.
to save video to the Camera In-line Camera In-line Pairing Button Pairing Button
AC power cable AC power cable
From the Main Menu on the Monitor, select the CAMERA SET UP icon
System 1 (Live Video) Connected 640x480 P2P, No1, 12.67FPS
LIVE VIEW
3
To set up EMAIL ALERT, tap the following icons from the pop-up menu,
fill in the information fields and tap OK to save, then < to return to the previous screen.
3
Align hole on bottom of camera with T-Bolt to install camera. Screw antenna into rear of camera.
EXPANDABLE up to 4 cameras
4
x2
Ask your retailer for accessory cameras (Model AWSC35) compatible with this system.
BACK cover
Attach power cable to power extension cord AC Adapter. Plug into electrical outlet.
x3
x4
Select camera station to be paired
1
Tap the CAMERA STATION you want to pair; a 60-second timer will start.
2
Within 60 seconds, press the PAIRING KEY once on the camera’s power cord. The timer will stop when the camera is paired.
3
Go to Home Screen to view live cameras on the Monitor.
Model AWS225
Wireless Made Simple.
FO LD
QUICK START GUIDE
Front cover
NOTE: Do not submerge in water or use monitor near water. STRANGULATION HAZARD: Infants have STRANGLED in power cords. Keep power cords more than 3 feet away from cribs. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons. Illustrations are for reference only. Actual product specifications may vary. For additional precautions and product information, please see owner’s manual at www.ALCWireless.com/support
For detailed installation and setup, please refer to the Model AWS225 complete User’s Guide available on our website: www.ALCWireless.com/support
SCAN
TO VIEW COMPLETE USER’S GUIDE
