Axicom Rf Signal Relays

Transcript

RF Signal Relays AXICOM HF3 Relay n Y-Design n Frequency range DC to 3GHz n Impedance 50Ω or 75Ω n Small dimensions (14.6x7.2x10mm) n 1 form C contact (1 changeover contact) n Immersion cleanable n Low power consumption (≤140mW) Typical applications Cable modems and linecards/ CATV, Tabs, measurement and test equipment ATE, satellite / audio / video tuners, wireless base stations and antennas, switching boards Contact Data Contact arrangement Max. switching voltage Rated current Limiting continuous current, 23°C Switching power Max. continuos RF-power, 23°C Contact material Minimum switching voltage Initial contact resistance Operate time Release time without diode in parallel with diode in parallel Bounce time Duration of set/reset pulse min. Mechanical endurance Coil Data Coil voltage range 1 form C, 1 CO 220VDC, 250VAC 2A 2A 60W, 62.5VA, 50W (2.5GHz) 50W (2.5GHz) Ag, Au covered 100µV <100mΩ at 10mA, 30mV typ. 3ms, max. 5ms typ. 2ms, max. 5ms typ. 4ms, max. 6ms typ. 1ms, max. 3ms 20ms 107 operations 3 to 24VDC Coil Data (continued) Coil versions, bistable Coil Rated Set Limiting Reset Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDC VDC VDC Ω±10% mW 50Ω version, bistable, 1 coil 71 3 2.25 9.20 -2.25 128 70 72 4.5 3.38 13.85 -3.38 289 70 73 5 3.75 15.30 -3.75 357 70 74 6 4.50 18.50 -4.50 514 70 75 9 6.75 27.70 -6.75 1157 70 76 12 9.00 37.00 -9.00 2057 70 77 24 18.00 74.00 -18.00 8228 70 50Ω version, bistable, 2 coils 91 3 2.25 6.50 2.25 64 140 92 4.5 3.38 9.80 3.38 145 140 93 5 3.75 10.90 3.75 178 140 94 6 4.50 13.00 4.50 257 140 95 9 6.75 19.60 6.75 574 140 96 12 9.00 26.10 9.00 1028 140 97 24 18.00 52.30 18.00 4114 140 All figures are given for coil without pre-energization, at ambient temperature +23°C. Coil versions, monostable Coil Rated Operate Limiting Release Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDC VDC VDC Ω±10% mW 50Ω version, monostable, 1 coil 51 3 2.25 6.50 0.30 64 140 52 4.5 3.38 9.80 0.45 145 140 53 5 3.75 10.90 0.50 178 140 54 6 4.50 13.00 0.60 257 140 55 9 6.75 19.60 0.90 574 140 56 12 9.00 26.10 1.20 1028 140 57 24 18.00 52.30 2.40 4114 140 75Ω version, monostable, 1 coil 01 3 2.25 6.50 0.30 64 140 02 4.5 3.38 9.80 0.45 145 140 03 5 3.75 10.90 0.50 178 140 04 6 4.50 13.00 0.60 257 140 05 9 6.75 19.60 0.90 574 140 06 12 9.00 26.10 1.20 1028 140 07 24 18.00 52.30 2.40 4114 140 All figures are given for coil without pre-energization, at ambient temperature +23°C. Coil Data (continued) Coil versions, bistable Coil Rated Set Limiting Reset Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDC VDC VDC Ω±10% mW 75Ω version, bistable, 1 coil 21 3 2.25 9.20 -2.25 128 70 22 4.5 3.38 13.85 -3.38 289 70 23 5 3.75 15.30 -3.75 357 70 24 6 4.50 18.50 -4.50 514 70 25 9 6.75 27.70 -6.75 1157 70 26 12 9.00 37.00 -9.00 2057 70 27 24 18.00 74.00 -18.00 8228 70 75Ω version, bistable, 2 coils 41 3 2.25 6.50 2.25 64 140 42 4.5 3.38 9.80 3.38 145 140 43 5 3.75 10.90 3.75 178 140 44 6 4.50 13.00 4.50 257 140 45 9 6.75 19.60 6.75 574 140 46 12 9.00 26.10 9.00 1028 140 47 24 18.00 52.30 18.00 4114 140 All figures are given for coil without pre-energization, at ambient temperature +23°C. 06-2015, Rev. 0615 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 Contacts in reset position. Contact position might change during transportation and must be reset before use. RF Signal Relays HF3 Relay (Continued) Coil Operating Range 140 mW 70 mW RF Data Coil operating Range Isolation 3.5 at 100MHz/900MHz 80dB/72dB 70 mW at 3GHz 45dB 3 Insertion loss Umax. at 0 A at 100MHz/900MHz 0.03dB/0.12dB 2.5 at 3GHz 0.35dB Voltage standing wave ratio (VSWR) 2 at 100MHz/900MHz/3GHz 1.05/1.20/1.20 140 mW Coil Voltage [U/Unom] Coil Voltage [U/Unom] Umax. at 0 A eset position. Contact pochange during transportat be reset before use. Unom. nominal coil voltage Urel. min. Ambient Temperature [°C] Unom3.5= Umax. = 3 Coil Voltage [U/Unom] Uop. min. = 2.5 2 Urel. min. = 1.5 1 80dB/72dB 40dB 0.03dB/0.12dB 0.40dB 1.05/1.20/1.40 1.5 Other Data 1 Unom. nominal coil voltage Uop. min. 70 mW AXICOM Nominal coil voltage Upper limit of the operative range 70 mWof the coil voltage (limiting voltage) Lower limit of the operative of Umax. atrange 0A the coil voltage (reliable operate voltage) For latching relays Uset min. resp. Ureset min. Lower limit of the operative range of the coil voltage (reliable release voltage) Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content 0.5 refer to the Product Compliance Support Center at Uop. min. www.te.com/customersupport/rohssupportcenter 0 Ambient temperature -55°C to +85°C -55 -45 -35 -25 -15 -5 5 15 25 35 45 55 65 75 85 95 105 115 125 135 Thermal resistance <165K/W Ambient Temperature [°C] Category of environmental protection IEC 61810 RT III - wash tight Degree of protection, IEC 60529 IP 67, immersion cleanable Vibration resistance (functional) 35g, 10 to 1000Hz Shock resistance (functional), half sinus 11ms 50g Shock resistance (destructive), half sinus 0.5ms 150g Terminal type SMT Weight max. 2.5g Resistance to soldering heat SMT Peak Value IEC 60068-2-58 265°C Moisture sensitive level, JEDEC J-Std-020D MSL3 Ultrasonic cleaning not recommended Packaging/unit reel/400 pcs., box/400 or 2000 pcs. Unom. nominal coil voltage All specifications subject to change. Consult Tyco Electronics for latest specifications. 0.5 Uop. min. 5 of 12 0 -55 -45 -35 -25 -15 -5 5 15 25 35 45 55 65 75 85 95 105 115 125 135 Ambient Temperature [°C] Insulation Data 50Ω version Initial dielectric strength between open contacts between contact and coil Initial surge withstand voltage between open contacts between contact and coil min. est specifications. 2 06-2015, Rev. 0615 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 75Ω version 600Vrms 1000Vrms 1000V 1500V 5 of 12 Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. RF Signal Relays AXICOM HF3 Relay (Continued) Typical RF performance, 75Ω version 0 0 -20 -20 Isolation [dB] Isolation [dB] Typical RF performance, 50Ω version -40 NO -60 NC -80 -40 -80 NC -100 -100 -120 -120 0 500 1000 1500 2000 2500 3000 0 Frequency [Mhz] Insertion-loss [dB] 0.0 NC -0.2 NO -0.3 -0.4 0 500 1000 1500 1000 1500 2000 2500 2000 2500 2000 2500 Typical RF performance, 75Ω version (continued) 0.1 0.1 -0.1 500 Frequency [Mhz] Typical RF performance, 50Ω version (continued) Insertion-loss [dB] NO -60 2000 2500 0.0 NO -0.1 NC -0.2 -0.3 -0.4 3000 0 Frequency [Mhz] 500 1000 1500 1.25 1.20 1.20 1.15 1.15 VSWR VSWR Frequency [Mhz] 1.25 1.10 NC 1.05 NO 500 1000 1500 2000 NO 1.05 1.00 0 NC 1.10 2500 3000 Frequency[Mhz] 1.00 0 500 1000 1500 Frequency[Mhz] Terminal assignment TOP view on component side of PCB Monostable Bistable, 1 coil Bistable, 2 coils + set - - reset + 22 21 20 19 18 17 16 15 14 13 12 1 Contacts are shown in reset condition. Contact position might change during transportation and must be reset before use. 2 3 4 5 6 7 8 9 + reset - - set + 10 11 HF3-PIN- 06-2015, Rev. 0615 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3 RF Signal Relays AXICOM HF3 Relay (Continued) PCB layout TOP view on component side of PCB 50Ω version 75Ω version THIS DRAWING IS A CONTROLLED DOCUMEN HJ REVISIONS DIST HJ Dimensions P LTR DESCRIPTION C D D1 D2 DATE Printing Printing REVIESED PER eco-11-005150 50Ω version REVISED PER ECO-11-017072 (ECR-13-009645) 21JUL2009 09JUL2010 09JUL2010 14JUN2013 P APVD LOC HD HD HMR AK DIST HJ - LTR P C D +0.1 14.6 D1 -0.1 A DESCRIPTION DATE 75Ω version Printing REVISED PER ECO-11-005150 REVISED PER ECO-11-017072 (ECR-13-009645) UKo UKo UKo 09JUL2010 +0.1 -0.1 25MAR2011 7.2 14JUN2013 7.2+0.1 -0.1 0.8 1.27+0.1 -0.1 5.08+0.1 -0.1 0.95 6.35+0.15 -0.15 C mm DIN 7168-m ES 5 (3/11) - 5 6 7 8 CHK 16AUG2002 APVD 16AUG2002 HD 9121 HD 9121 PRODUCT SPEC - 9 10 11 0.9 1.27 Relay housing 0.7 DRAWING ALIAS: 16AUG2002 MATERIAL FINISH - - A-A SIZE HF3-Relay 50 Dimensions CAGE CODE DRAWING NO 0.5 0.8 10+0.5 0 0.4 5.08+0.1 -0.1 XX = Relay type zz = nominal voltage YYWW = Date code NNNN = Lot number mm 1.27 6.35+0.15 -0.15 0.5 5.08+0.1 -0.1 6.35+0.15 -0.15 TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLCDIMENSIONS: ANGLES - 0.5 +0.1 -0.1 1.27 +0.15 6.35-0.15 16AUG2002 CHK 16AUG2002 HD 9121 mm 0 PLC 1 PLC 2 PLC 3 PLC RESTRICTED- TO 4 PLC ANGLES DWN UKo 9193 - HD 9121 7.2 5 7 - 8 9 10 11 0.9 Relay housing 1 2 3 4 5 6 7 8 0.6 9 10 11 0.9 0.9 0.5 Relay housing 1.27 MATERIAL - A-A FINISH - 2.54 0.6 TE Connectivity NAME SIZE 16AUG2002 HF3-Relay 75 Dimensions MATERIAL CAGE CODE DRAWING NO A4 16AUG2002 00779 NAME APPLICATION SPEC SIZE A4 Datasheets andWEIGHT product- data is subject to the SCALE SHEET REV OF 1 according to IEC 61810-1 3:1 and to1 be used D2terms of the disclaimer and all chapters of CUSTOMER DRAWING the ‘Definitions’ section, available at only together with the ‘Definitions’ section. 1469-35 (3/11) http://relays.te.com/definitions A-A FINISH - RESTRICTED TO 1462050-2 SCALE HD 9121 - 6 5 1.27 CUSTOMER DRAWING16AUG2002 APVD PRODUCT SPEC - 4 16AUG2002 APPLICATION SPEC WEIGHT CHK TOLERANCES UNLESS OTHERWISE SPECIFIED: 3 2.54 5.08+0.1 -0.1 DWN UKo 9193 2 0.5 5.08+0.1 -0.1 +0.1 -0.1 1 0.9 1.27+0.1 -0.1 +0.15 0.950.8 6.35-0.15 0.95 0.5 0.5 1.27+0.1 -0.1 7.2 0.8 DIMENSIONS: - 0.5 22 21 20 19 18 17 16 15 14 13 12 DIN 7168-m 1462051-2 A4 00779Datasheets and product specification 0.7 0.95 22 21 20 19 18 17 16 15 14 13 12 1469-35 (3/11) NAME 0.4 2.54+0.1 -0.1 0.8 XX = Relay type APVD HD 9121 zzDIN=7168-m nominal voltage PRODUCT SPEC YYWW = Date code H2000-DOK02 NNNN = Lot number TE Connectivity 06-2015, Rev. 0615 CUSTOMER DRAWING www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company WEIGHT 4 2.54 DWN 1 3 0.9 6.35+0.15 -0.15 APPLICATION SPEC 4 2 0.9 5.08+0.1 -0.1 UKo 9193 TOLERANCES UNLESS OTHERWISE SPECIFIED: 7.2 1 XX = Relay type zz = nominal voltage YYWW = Date code NNNN = Lot number DIMENSIONS: 5 0.5 1.27+0.1 -0.1 THIS DRAWING IS UNPUBLISHED. COPYRIGHT2005 BY TE Connectivity 0.8 6 10 22 21 20 19 18 17 16 15 14 13 12 0.5 0.5 0.95 6 0.9 0.5 2.54+0.1 -0.1 3.81+0.1 -0.1 0.9 0.7 0.5 5 0.95 0.4 -0.1 2.54+0.1 -0.1 14.6 0.9 +0.1 5.08 -0.1+0.1 3.81 10 0.8 5.08+0.1 -0.1 6 0.8 0.7 0.1 A 14.6 10 0.9 2.54+0.1 -0.1 COPYRIGHT2005 BY TE Connectivity THIS DRAWING IS UNPUBLISHED. 2.54+0.1 -0.1 5.08+0.1 -0.1 +0.1 +0.1 3.81 2.54 -0.1 -0.1 ALL RIGHTS RESERVED. 0.9 3.81+0.1 -0.1 9.4+0.2 -0.2 9.4+0.2 -0.2 C 3.81+0.1 -0.1 5.08+0.1 -0.1 3.81+0.1 -0.1 COPYRIGHT2005 BY TE Connectivity 14.6 5.08+0.1 -0.1 4.9 6.7 6.7 0.1 A C 0.1 A ALL RIGHTS RESERVED. 9.4 RELEASED FOR PUBLICATION RELEASED FOR PUBLICATION 6.7 +0.2 -0.2 5.08+0.1 -0.1 0.9+0.1 -0.1 3° 2 3° 2005 10+0.5 0 2005 0.9+0.1 -0.1 2 3° Coplanarity<=0.10mm AP HD HD HM AK A 4.9 Coplanarity<=0.10mm Coplanarity<=0.10mm UKo UKo UKo UKo HD HMR A AK 2 14.6+0.1 -0.1 4.9 DWN 21JUL2009 Printing C THIS DRAWING IS A CONTROLLED DOCUMENT. 09JUL2010 Printing D REVISIONS 25MAR2011 REVISED PER ECO-11-005150 D1 LTR DESCRIPTION DATE DWN APVD 14JUN2013 D2PrintingREVISED PER ECO-11-017072 (ECR-13-009645) 21JUL2009 UKo HD D2 7.2+0.1 -0.1 14.6+0.1 -0.1 DWN UKo UKo RK UKo - 10+0.5 0 THIS DRAWING IS A CONTROLLED DOCUMENT. LOC REVISIONS DIST 0.9+0.1 -0.1 LOC 3:1 - SHEET 1 OF 1TE Connectivity D2 REV HF3-Relay 75 Dimensions RESTRICTED T CAGE CODE DRAWING NO Datasheets, data, ‘Definitions’ sec00779 product 1462050-2 tion, application notesSCALE and all specifications SHEET 1 3:1 are subject to change. OF 1 REV D RF Signal Relays AXICOM HF3 Relay (Continued) Processing Packing Tape and reel for SMT Resistance to soldering heat Reel dimensions Infrared soldering Temperature [°C] temperature/time profile (lead and housing peak temp.) Time [s] Recommended soldering conditions Vapour phase soldering 20 to 40s 240°C full line: typical dotted line: process limits Temperature [°C] 180°C 130°C external preheating 100°C forced cooling Vapour phase soldering temperature/time profile (lead and housing peak temp.) Time [s] 06-2015, Rev. 0615 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 5 RF Signal Relays AXICOM HF3 Relay (Continued) Product code structure Typical product code HF3 53 Type HF3 Signal Relays HF3 Series 1 form C, 1 CO Coil Coil code: please refer to coil versions table Performance type 5x 50Ω version, monostable 1coil 7x 50Ω version, bistable 1coil 9x 50Ω version, bistable 2coils Product code Arrangement 0x 2x 4x 75Ω version, monostable 1coil 75Ω version, bistable 1coil 75Ω version, bistable 2coils Version Coil Coil type Part number HF3 51 1 form C (1 CO) 50ohm 3VDC Monostable 1462051-1 HF3 52 4.5VDC 1-1462051-6 HF3 53 5VDC 1462051-2 HF3 54 6VDC 1-1462051-7 HF3 55 9VDC 1462051-3 HF3 56 12VDC 1462051-4 HF3 57 24VDC 1462051-5 HF3 71 1 form C (1 CO) 50ohm 3VDC Bistable 1 coil 1462051-6 HF3 72 4.5VDC 1-1462051-8 HF3 73 5VDC 1462051-7 HF3 76 12VDC 1462051-9 HF3 91 1 form C (1 CO) 50ohm 3VDC Bistable 2 coils 1-1462051-1 HF3 92 4.5VDC 2-1462051-0 HF3 93 5VDC 1-1462051-2 HF3 95 9VDC 1-1462051-3 HF3 96 12VDC 1-1462051-4 HF3 97 24VDC 1-1462051-5 HF3 01 1 form C (1 CO) 75ohm 3VDC Monostable 1462050-1 HF3 02 4.5VDC 1-1462050-6 HF3 03 5VDC 1462050-2 HF3 06 12VDC 1462050-4 HF3 07 24VDC 1462050-5 HF3 21 1 form C (1 CO) 75ohm 3VDC Bistable 1 coil 1462050-6 HF3 23 5VDC 1462050-7 HF3 26 12VDC 1462050-9 HF3 41 1 form C (1 CO) 75ohm 3VDC Bistable 2 coils 1-1462050-1 HF3 43 5VDC 1-1462050-2 HF3 46 12VDC 1-1462050-4 HF3 47 24VDC 1-1462050-5 This list represents the most common types and does not show all variants covered by this data sheet. Other types on request 6 06-2015, Rev. 0615 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.