B0225j7575ahf Datasheet Reva

Transcript

Model B0225J7575AHF Rev A Ultra Low Profile 0805 Balun 75Ω to 75Ω Balanced fee Description The B0225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation wireless chipsets in an easy to use surface mount package covering the DVB-T, DVB-C and DVB-S broadcast frequencies. The B0225J7575AHF is ideal for high volume manufacturing and is higher performance than traditional wire wound and lumped element baluns. The B0225J7575AHF has an unbalanced port impedance of 75Ω and a 75Ω balanced port impedance. This transformation enables single ended signals to be applied to differential ports. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The B0225J7575AHF is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. Broadband Features: • • • • • • • • • • 200 – 2500 MHz 0.7mm Height Profile 75 Ohm to 2 x 37.5 Ohm DVB-T, DVB-C & DVB-S Low Insertion Loss Surface Mountable Tape & Reel Non-conductive Surface RoHS Compliant Halogen Free Parameter Min Frequency Unbalanced Port Impedance Balanced Port Impedance Return Loss Insertion Loss* Amplitude Balance Phase Balance CMRR Power Handling Operating Temperature 200 Typ 75 75 16 0.9 3.0 38 8 14 Narrowband Max Min 2500 350 17 1.1 3.2 40 0.5 +85 -55 Typ Max Unit 550 MHz Ω Ω dB dB dB Degrees dB Watts ºC 75 75 20 0.4 1.4 24 13 0.5 1.6 26 0.5 +85 -55 25°C * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing TOP VIEW (Near Side) SIDE VIEW BOTTOM VIEW (Far Side) 4x 0.37 2.04±0.10 0.70±0.05 1 3 2 2x 0.15 1.29±0.10 6x 0.98 Orientation Marker Denotes Pin Location Orientation Marker Denotes Pin Location Mechanical Outline -Dimensions are in Millimeters -Tolerences are Non-Cumulative Pin 1 2 3 4 5 6 6x 0.22 6 5 4 4x 0.65 6x 0.30 Designation Unbalanced Port GND Balanced Port Balanced Port Do not connect NC Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model B0225J7575AHF Rev A Typical Broadband Performance: 0 GHz. to 8.5 GHz. Insertion Loss -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 6500 7000 7500 8000 8500 7500 8000 8500 5000 5000 4500 4000 3500 3000 2500 2000 1500 1000 8500 8000 7500 7000 -20 6500 -2 6000 -15 5500 -1.5 5000 -10 4500 -5 -1 4000 -0.5 0 0 500 0 3500 7000 5 3000 6000 0.5 2500 6500 10 2000 5500 15 1 1500 6000 1.5 deg 20 500 4500 Phase Balance 2 1000 5500 Amplitude Balance 0 4000 Frequency [MHz] Frequency [MHz] [dB] 3500 0 8500 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 3000 2500 2000 -3.6 1500 -36 1000 -3.3 0 -3 -33 3000 -2.7 -30 2500 -2.4 -27 2000 -2.1 -24 1500 -1.8 -21 1000 -18 500 [dB] 0 500 [dB] Return Loss - Input 0 Frequency [MHz] Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 8500 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 3000 2500 2000 1500 1000 0 -36 500 [dB] -15 Frequency [MHz] Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model B0225J7575AHF Rev A Typical Performance: 200 MHz. to 2500 MHz. Return Loss - Input Insertion Loss 0 -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 [dB] -18 -1.8 -21 -2.1 -24 -2.4 -27 -2.7 -30 -3 -33 -3.3 2400 2500 2200 2300 1700 1600 2100 2200 1600 1700 1500 1300 1400 1200 1000 1100 800 900 700 2500 2500 Frequency [MHz] 500 600 2400 2000 2100 2000 2400 1900 1900 2200 2300 1700 1800 -20 1700 -2 1600 -15 1500 -1.5 1400 -10 1300 -1 300 400 0 -5 200 0 -0.5 1100 1200 2500 5 1000 2300 2400 0.5 800 900 2000 2100 10 700 2000 15 1 600 1800 1900 1.5 deg 20 500 1400 1500 Phase Balance 2 400 1800 1900 Amplitude Balance 200 300 1200 1300 900 Frequency [MHz] Frequency [MHz] [dB] 1000 1100 800 700 200 300 2500 2300 2400 2100 2200 2000 1800 1900 1600 1700 1500 1300 1400 1200 1100 1000 800 900 700 600 500 300 400 200 600 -3.6 -36 400 500 [dB] 0 Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 2300 2100 2200 1800 1600 1500 1400 1300 1100 1200 1000 900 700 800 600 500 300 400 -36 200 [dB] -15 Frequency [MHz] Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model B0225J7575AHF Rev A Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. Circuit Pattern Dimensions are in Millimeters Mounting Footprint Footprint Pad (s) Solder Resist 6x .41 4x .25 Plated thru holes to ground 3x Transmission lines .04 6x .33 .66 Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model B0225J7575AHF Rev A Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information. 2.00 .81 4.00 1.75 3.50 8.00 1.60 4.00 2.41 .25 Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Anaren: B0225J7575AHF