Transcript
A computer with a DisplayPort v1.2 compatible Graphics Card (e.g. AMD Radeon with AMD Eyefinity technology) is required to display in video wall mode. Backward compatible with most DisplayPort 1.1a equipment running current graphics drivers, with the feature set being limited to that of your equipment (e.g. you may be limited to displaying in Clone / Mirror mode only). Compatibility with older graphics cards is not
Highlights Compliant with DisplayPort 1.2 Splits or expands a DisplayPort audio/video signal on two
guaranteed. Maximum supported video resolutions and number of monitors will be dependent upon your graphics card.
DisplayPort monitors Display the same image on each
Check the specifications of your graphics card to determine its capabilities.
monitor, extend the desktop
2-Port DisplayPort 1.2 Multi-Stream Transport (MST) Hub, 3840 x 2160 4Kx2K UHD, TAA
across them, or display in video
MODEL NUMBER: B156-002
Supports 4K x 2K Ultra High
wall mode where monitors are combined to display as one
Definition (UHD) video resolutions up to 3840 x 2160 (24 and 30 Hz) - see System Requirements Supports up to 48-bit Deep Color (16 bits per channel) Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
System Requirements A computer with a DisplayPort v1.2 compatible Graphics Card
Description Get everyone’s attention by broadcasting awesome messages in ultra-high definition video! With Tripp Lite's B156-002 2-Port Multi-Display Video Splitter/Expander, you can split or expand a single DisplayPort signal into two separate signals and display them on two DisplayPort monitors using standard DisplayPort cables (Tripp Lite P580-Series or P583-Series). You can display the same image on each monitor, extend the desktop across them, or display in video wall mode where monitors are combined to display as one, enlarged monitor. The B156-002 supports 4Kx2K Ultra-High Definition (UHD) video resolutions up to 3840x2160 (24 and 30Hz), 48-bit Deep Color (16 bits per channel), and is compatible with HDCP, EDID and DDC. It is compliant with DisplayPort v1.2. It comes with an external power supply and brackets for wall-, rack- or pole-mounting. All mounting hardware is included. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
(e.g. AMD Radeon with AMD Eyefinity technology) is required to display in video wall mode. Mac OS X does not support MST for NVIDIA and Intel Graphics Processor Units, limiting video display on the connected monitors to mirror mode. Backward compatible with most
Features
DisplayPort 1.1a equipment
Splitting, Extending, Multi-Display
running current graphics drivers,
Splits a DisplayPort video signal to simultaneously display the same signal on two DisplayPort monitors, or
with the feature set being limited
expands it across both monitors as in video wall mode
to that of your equipment (e.g.
Displays can be placed up to 25 ft. away from the splitter/expander; the video source can be up to 16 ft. away
you may be limited to displaying
from the splitter/expander (6 ft. is recommended).
in Clone / Mirror Mode only).
Supports both 4Kx2K (3840x2160 at 24 and 30Hz) UHD video and standard 1080p (1920x1080 at 60Hz)
Compatibility with older graphics
high-definition video
cards is not guaranteed. 1/3
Maximum supported video
Maximum supported video resolutions and number of
Video Standards and Protocols Supports up to 48-bit Deep Color (16 bits per channel) and video resolutions up to 4K Ultra High Definition
monitors will be dependent upon
(UHD), 3840x2160 (24 and 30Hz)
your graphics card. Check the
Complies with HDCP, EDID and DDC
specifications of your graphics
Compatible with DisplayPort 1.2
card to determine its capabilities.
Compatible with Apple® Thunderbolt connectors (using P583-Series Mini Displayport to Displayport adapter
A monitor with a Displayport
cable)
input port. For international use, the B110-INT power supply can be
Installation Plug-and-play; no software or drivers required
purchased separately; it features
Easy to install; connect the DisplayPort video source to the hub’s input port, connect the external power
plugs for the UK, Europe, and
supply, and finally connect the two monitors to the output ports
Australia
Package Includes
Mounting Options
B156-002 Multi-Display
Wall-, rack- or pole-mounting; all mounting hardware is included
Splitter/Expander Mounting hardware
TAA-Compliant for GSA Schedule Purchases Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Bracket (for wall-, rack- or pole-mounting) External Power Supply with NEMA 1-15P Plug (Input:
Specifications
100-240V, 50/60Hz, 0.5A; Output: 5V, 2A, 5 ft.)
OVERVIEW AC Adapter
Input: 100-240V, 50/60Hz, 0.5A; Output: 5V, 2A, 5 ft.
PHYSICAL Unit Dimensions (hwd / in.)
1.00 x 3.60 x 2.52
Unit Dimensions (hwd / cm)
2.54 x 9.144 x 6.4
Unit Weight (lbs.)
1
Unit Weight (kg)
0.45
Color
Black
CONNECTIONS Ports
2
Side A - Connector 1
DISPLAYPORT (FEMALE)
Side B - Connector 1
(2) DISPLAYPORT (FEMALE)
WARRANTY 2/3
Product Warranty Period (Worldwide)
1-year limited warranty
© 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies: https://www.tripplite.com/products/product-certification-agencies
3/3
Mouser Electronics Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Tripp Lite: B156-002
