Preview only show first 10 pages with watermark. For full document please download

B2602, B2603, B2604, B2605

   EMBED

Share

Transcript

Backboard Pad Mounting Instructions Acrylic Backboard 1. Use the Backboard Pads as a template and mark the hole locations on the backboard frame. 2. Drill 1/8" pilot holes through the aluminum backboard frame and into steel backboard frame. 3. Secure Backboard Pads using screws provided. Note: Power screw driver recommended for screw installation. Do not over tighten screws. Do not drill through top of steel tube Steel Frame Aluminum Frame Mounting Screw Glass Backboard 1. Use the Backboard Pads as a template and mark the hole locations on the backboard frame. 2. Drill 1/8" pilot holes completely through the aluminum backboard frame. 3. Secure Backboard Pads using screws provided. Note: Power screw driver recommended for screw installation. Do not over tighten screws. Drill all the way through aluminum frame Aluminum Frame Board Pad Mounting Screw 2L-6659-01