Preview only show first 10 pages with watermark. For full document please download

B304a Installation Instructions.

   EMBED

Share

Transcript

B304A Installation Instructions. 1. Cut a 200mm diameter hole in the panel or ceiling. 2. Remove the speaker grille by levering with a bradawl at several points around the circumference, as shown below. 3. Arrange the retaining clips as shown below, and insert the speaker into the hole. 4. Tightening the screws will rotate the retaining clips, to locate the speaker in the hole. 5. Replace the grille. 6. Connect the loudspeaker to an amplifier with low-impedance outputs. DO NOT connect to a 100V-line amplifier, unless a transformer is used.