Preview only show first 10 pages with watermark. For full document please download

Band-specific High Power Amplifier

   EMBED


Share

Transcript

Band-Specific High Power Amplifier Product Name : RCA2025H47B1, Code Name : B1Y6SD3UI45 Doc. Name : Preliminary Short Spec. Preliminary Short Specification for RCA2025H47B1 1 RESTRICTION ON USE, DUPLICATION, OR DISCLOSURE OF PROPRIETARY INFORMATION This document contains proprietary information, which is the sole property of RFcore co., LTD. The document is submitted to the recipient for his use only. By receiving this document the recipient undertakes not to duplicate the documents or to disclose in part of, or the whole of, any of the information contained herein to any third party without receiving beforehand, written permission from the submitting company. Created Printed 2014/8/5 2016/1/19 Document Number Revision Manufacturer B RFcore co.,Ltd File : RCA2025H47B1 Short Spec.docx The Specifications is subject to change before finalization Customer Service: Tel. 82-31-708-7575 Email: [email protected] http://www.rfcore.com Band-Specific High Power Amplifier Product Name : RCA2025H47B1, Code Name : B1Y6SD3UI45 Doc. Name : Preliminary Short Spec. ELECTRICAL SPECIFICATIONS @ 50 Ohms load, 28 Vdc, Tc ≒ 35 ℃ Parameter Specification Frequency Range 2000 ~ 2500 MHz Saturated Output Power 47 dBm typ. Remark @ CW 46 dBm min. Small Signal Gain 47 dB min. Input level = -15dBm Small Signal Gain Flatness Peak to Peak 6.0 dB Input level = -15dBm Maximum Input Power for no damage 7 dBm max. Input VSWR Less than 1.5 : 1 Output VSWR Less than 1.5 : 1 DC Input Voltage 28 ± 1.0 Vdc Current Consumption 6.5 A max. Built-in Isolator @ Pout = 47dBm 4.5 A typ. I/O Interface(D-Sub 9Pin Male) 1. Temperature Monitor VT = 0.02*Tc + 1.0 (V) Tc is Case Temperature in degC ± 5℃ 2. Forward Power Monitor 4.0±0.2@47dBm, slope : 0.1V/dB Vpin2 = 4.0-(47-Pout)x0.1±0.2V 3. GND 2 4. Reflected Power Monitor Diode Detector 5. VSWR Fail Alarm Alarm : TTL High Reflected power = 40~43dBm (Vpin4≒1.4±0.1V) @Fcenter 6. Vcc 7. Vcc 8. GND 9. Enable(Active Low) Pulled-up @ 5V with 10kohm ENVIRONMENTAL SPECIFICATIONS Parameter Specification Operating Case Temperature -20 ~ +70 ℃ Storage Temperature -40 ~ +85 ℃ Created Printed 2014/8/5 2016/1/19 Document Number Remark Revision Manufacturer B RFcore co.,Ltd File : RCA2025H47B1 Short Spec.docx The Specifications is subject to change before finalization Customer Service: Tel. 82-31-708-7575 Email: [email protected] http://www.rfcore.com Band-Specific High Power Amplifier Product Name : RCA2025H47B1, Code Name : B1Y6SD3UI45 Doc. Name : Preliminary Short Spec. MECHANICAL SPECIFICATIONS Parameter Specification Remark Dimension 110 * 90 * 22 mm Input / Output Connector SMA Female / SMA Female Control Connector D-Sub 9Pin Male Cooling Adequate Heat-sink required MECHANICAL DRAWING 1 2 3 4 5 6 7 8 DATE REVISION APP. 1 A A B B RF Output RCA2025H47B1 C C 5 4 3 2 3 1. Temperature Monitor 2. Forward Power Monitor 3,8. GND 4. Reflected Power Monitor 5. VSWR Fail Alarm 6,7. Vcc 9. Enable (Active Low) 1 9 8 7 6 RF Input D D E E MATERIAL FINISH UNIT Q'ty ANGLE mm F DESIGNED 기구 설계 CHOI S-J 회로 2 3 4 5 6 APPROVED 7 SCALE 1 : 1 F FILE PATH - MODEL NO. RCA2025H47B1 MODEL NAME AMP PART NAME OUTLINE DRAWING DRAWGING NO. - 설계 1 CHECKED 1 / 1 8 DRAWING REFERNECE: This is subject to change without notice. Created Printed 2014/8/5 2016/1/19 Document Number Revision Manufacturer B RFcore co.,Ltd File : RCA2025H47B1 Short Spec.docx The Specifications is subject to change before finalization Customer Service: Tel. 82-31-708-7575 Email: [email protected] http://www.rfcore.com