Preview only show first 10 pages with watermark. For full document please download

Bandwidth Attenuation Accuracy Rise Time Input Impedance Input

   EMBED

Share

Transcript

Bandwidth Attenuation Accuracy Rise Time Input Impedance DC to 70MHz (-3dB) 1:100/1000 +/- 2% <5ns 50Mohm//7pF each side to ground Input Voltage -Differential Range - Common Mode Range - Absolute Max. Voltage (Differential or Common Mode) Output Voltage - Swing -Offset (typical) -Noise (typical) -Source Impedance (typical) +/-700V(DC + Peak AC) or 500Vrms @ 1/100 +/-7000V(DC + Peak AC) or 5000Vrms @ 1/1000 +/-7000V(DC + Peak AC) or 5000Vrms @ 1/100 & 1/1000 +/-7000V(DC + Peak AC) or 5000Vrms @ 1/100 & 1/1000 +/-7V(into 50kohm load) <+/-5mV 0.9mVrms 50 ohm (for using 1MΩ input system oscilloscope) < system input ohm 1M using (for> CMRR (typical) Ambient Operating Temperature Ambient Storage Temperature Ambient Operating Humidity Ambient Storage Humidity Power Requirements* -Standard -Options -80dB@50Hz; -60dB@20kHz -10 to 40 degree centigrade -30 to 70 degree centigrade 25 to 85% RH 25 to 85% RH 4xAA cells Power leads, Mains adaptor*(6VDC/200mA or regulated Length of BNC Cable Length of Input Leads Weight Dimension (LxWxH) 9VDC/120mA), USB power cord 90cm 60cm 500gms 202mm x 83mm x 38mm * a. The supplied voltage must be less than 12V and greater than 4.4V, otherwise the probe could be damaged or can＇t operated properly. b. Polarity is “+＂ inside and “-＂ outside. For wrong polarity, built-in circuit protects the probe, no danger or damage will occur. c. When the voltage of the cells become too low, the power indicator on the panel will flicker. Features: ‧Up to +/- 7000V(DC+Peak AC) Differential ‧Bandwidth up to 70MHz ‧Safety Certified ‧Overrange Indicator Applications: ‧High Voltage Floating Measurement ‧Voltage Surge Measurement ‧Power Electronics System Design