Transcript
Baronet
Motor-in-Roller Electric Screen Dimensions & Data
projection screens, size h. x w., wall/ceiling mounting. Pentagonal case of 22 ga. steel, flat back design, with scratch-resistant white polyester finish. Endcaps finished to match case, with integral roller brackets, concealing roller ends and matching universal mounting brackets. Electrically operated (110-120V AC, 60 hz./220-230v AC, 50 hz.) 3-wire motor mounted inside (15/8"/13/4") motor roller, instantly reversible, lifetime lubricated, with thermal overload protector and electric brake. Preset, accessible limit switches. Standard Baronet—Provided with 3-position in-line operating switch, 110-120V AC model with or without standard plug, 220V model without plug. 110-120V unit with U.S. plug certified by UL. Baronet/HW—Provided with 3-position wall switch for 110V AC or 220V AC. 110V unit certified by UL. 220V unit CE certified, and provided with 3-position, surface mount wall switch. All screens shall be provided with a [10' (3m) power cord and 3-position in-line operating switch] [6"-8" (15-20 cm) leads and 3-position wall switch]. Viewing surface of ([GREENGUARD for Children and Schools certified Matt White] [glass beaded] [optional GREENGUARD for Children and Schools certified High Contrast Grey]), flame and mildew resistant. Matt White and optional High Contrast Grey viewing surfaces shall qualify as low emitting and meet all of the requirements of the GREENGUARD for Children and Schools and GREENGUARD certification program, which are: emissions of total volatile organic compounds < 0.22 mg/m3, formaldehyde < 0.0135 ppm, total aldehydes < 0.043 ppm, individual volatile organic compounds < 1/1000 TLV and < ½ chronic REL and total phthalates < 0.01 mg/m3. Fabric attached to one-piece rigid steel roller with tape. Bottom of viewing surface attached to weighted dowel. Note: Matt white and glass beaded surfaces up to 10' (305) cm high will be seamless.
Metric U.S. H x W (cm) H xW AV Format (1:1) 127 x 127 50" x 50" 152 x 152 60" x 60" 178 x 178 70" x 70" 213 x 213 84" x 84" 183 x 244 72" x 96" 244 x 244 96" x 96" Nominal Image Area Diagonal Metric (cm) U.S. NTSC/PAL Video Format (4:3) 6'/183 cm 108 x 144 421/2" x 561/2" 7'/213 cm 127 x 169 50" x 661/2" 100"/254 cm 152 x 203 60" x 80" 10'/305 cm 175 x 234 69" x 92" HDTV Format (16:9) 65"/165 cm 1 81 x 144 31¾" x 56½" 73"/185 cm 1 91 x 163 36" x 64" 82"/208 cm 1 103 x 183 40½" x 72" 92"/234 cm 1 114 x 203 45" x 80" 106"/269 cm 1 132 x 234 52" x 92" 16:10 Format 67"/170 cm 1 90 x 144 35¼" x 56½" 76"/193 cm 1 102 x 163 40" x 64" 85"/216 cm 1 114 x 183 45" x 72" 94"/239 cm 1 127 x 203 50" x 80" 109"/277 cm 1 146 x 234 57½" x 92" WideScreen Format (1.85:1) 99"/251 cm 119 x 221 47" x 87" 108"/275 cm 127 x 234 50" x 92" Custom Size
Specifications—Baronet
1
3¾" 96 mm
Overall Size Metric (cm)
U.S.
Case Length cm U.S.
Net Wt. kg lbs.
Qty.
140 55¼" 166 65¼" 191 75¼" 227 89¼" 258 101¾" 258 101¾" Case Length cm U.S.
7 15 9 19 10 21 14 30 15 31 15 32 Net Wt. kg lbs.
Qty.
118 x 151 461/2" x 591/2" 136 x 177 531/2" x 691/2" 163 x 212 64" x 831/2" 185 x 244 73" x 96"
166 191 227 258
65¼" 75¼" 89¼" 101¾"
9 10 14 15
19 21 30 32
111 x 151 122 x 177 133 x 188 145 x 212 163 x 244
43¾" x 59½" 48" x 69½" 52½" x 74" 57" x 831/2" 64" x 96"
166 191 202 227 258
65¼" 75¼" 79¾" 89¼" 101¾"
9 10 14 15 15
19 21 30 31 32
120 x 151 132 x 177 145 x 188 157 x 212 177 x 244
47¼" x 59½" 52" x 69½" 57" x 74" 62" x 831/2" 69½" x 96"
166 191 202 227 258
65¼" 75¼" 79¾" 89¼" 101¾"
9 10 14 15 15
19 21 30 31 32
130 x 229 137 x 244
51" x 90" 54" x 96"
243 258
95¾" 101¾"
14 15
30 32
These sizes include 12" black drop as standard.
Also available in 2.35:1 and 15:9 Formats. Contact Draper.
Case Dimensions and Methods of Installation 3¼" (83 mm)
by
Please Check All Appropriate Selections Select Viewing Surface: GREENGUARD for Children and Schools certified Matt White Glass Beaded GREENGUARD for Children and Schools certified Optional High Contrast Grey
Fabric width + 5¾" (146 mm)
Select Model:
3¼" (83 mm)
Baronet—3-Position In-Line Operating Switch (No wiring required) 110V AC With 3-prong plug 110V AC (Without Plug) 220V AC (Without Plug) Baronet/HW—3-Position Wall Switch (See wiring diagram on back) 110V AC (UL certified) 220V AC (CE certified)
Viewing Surface
Optional Accessories: Back hole for wall mounting. Hardware by others. Crimp both ends of “S” Hook
Standard Endcap
Crimp both ends of “S” Hook
15 cm Brackets
15 cm
HW/CE Endcap
24V Low Voltage Control (With 3-Position Wall Switch Only) Radio Frequency Remote Control (With 24V Only) Infrared Remote Control (With 24V Only) 15 cm Mounting Brackets Black Masking Borders(Standard on NTSC, HDTV & WideScreen Sizes) Extra Screen Drop (Total screen height cannot exceed 244 cm/96") Same color as viewing surface (standard on AV format screens) Black (standard on all other formats) Length of extra screen drop required
PROJECT: Top Hole for suspended mounting. Hardware by others.
Please Note: If using "S" Hooks, for added safety, crimp both ends of the “S” hooks so the screen cannot come off.
ARCHITECT: CONTRACTOR: SUPPLIER:
Copyright © 2009 Draper Inc.
Form Baronet_Int_Sub09-R3
Printed in U.S.A.
DATE:
REVISED:
Page 2 of 2
Baronet by Draper Wiring Diagrams Standard Baronet 110V or 220V Blue or White = Neutral Brown or Black = Line Green = Ground
Baronet/HW 110V AC
Baronet/HW 220V AC (CE)
Multiple Station Control
Single Station Control
Junction box at left end of screen
Junction box at left end of screen
Single Station Control
Green (Motor Ground)
CE Approved
Junction box at eft end of screen
Internal Screen Wiring White (Common) Black (Down) Red (Up) Green (Motor Ground)
Internal Screen Wiring White (Common) Black (Down) Red (Up)
Junction box at left end of screen
Multiple Station Control Not CE Approved
Internal Screen Wiring Blue-220v (Common) Brown-220v (Down) Black-220v (Up)
Internal Screen Wiring Blue-220v (Common) Brown-220v (Down) Black-220v (Up)
Green (Motor Ground)
Green (Motor Ground) Control switch Single gang box by others Min. 4" x 2-1/8" x 1-7/8" deep Blue Red Black Red
Blue
Black
Blue
Control switch
Black
Blue
Dashed wiring by installer
Single gang box by others Min. 4" x 2-1/8" x 1-7/8" deep. 3 shown. More or less equally feasible.
Black
220v, 50 Hz.
Location of key operated on-off switch if furnished
Red
Blue
Black Dashed wiring by installer
220v, 50 Hz.
To 110V AC Line
Low Voltage, IR Remote or RF Remote (LVC-III)**
MC1**
Internal Screen Wiring
See separate Serial Communication-RS232 Instruction sheet for enabling RS232 with the MC1.
White (Common) Red 110/Black 220 (Up) Black 110/Brown 220 (Down) Green 110V/ Green/Yellow 220V (Motor Ground)
White-Common to screen & 110/220V AC Neutral Red-to screen (directional) Brown-to screen (directional) Yellow-to 110/220V AC-Hot Black-to 110/220V AC-Hot Green(Ground) Dashed wiring by electrician Low voltage wiring by others Eye Port for IR Eye, RF Receiver or LED Wall Switch. For more than one of these, a splitter is required. 3 Button Wall Switch DOWN - Black COM - White UP - Red Aux Port for connecting additional LVC-III modules (up to six total can be linkedconnect from Aux to Eye).
Blue
Hot
Red
Neutral
Black
Red Neutral
Red
To 110V AC Line
Blue
Red
Dashed wiring by electrician
Black
Location of key operated on-off switch if furnished
Cap off with wire nut & tape
Cap off with wire nut and tape
L1
Dashed wiring by electrician
Internal Screen Wiring
To 110/220V Line
White or Blue-Common Red-to Screen (directional) Black-to Screen (directional) Brown-Hot to AC Green/Yellow-Ground
Program LED
White (Common) Red 110/Black 220 (Up) Black 110/Brown 220 (Down) Green 110V/ Green/Yellow 220V (Motor Ground)
STOP
STOP
Location of key operated on-off switch if furnished
Low Voltage Wiring by others AC Wiring by electrician
Fuse
RS232 Data FROM Control System RS232 Data TO Control System Signal Ground & Manual Switch Common Manual Switch Down Manual Switch Up
Control Switches 24v DC
MC1
Location of key operated on-off Eye Port for IR Eye. For RF Receiver or LED switch if furnished Wall Switch, a Splitter and a Power Supply is required. Plug RF Receiver or LED Wall Switch and Power Supply into splitter, then run cable from Splitter to MC1 Eye Port. To AC Line
* For more information and wiring diagrams for low voltage multiple motors and network communication, please see Draper Screen and Lift Controls Planning Sheet, Draper Screens and Lift Controls Wiring Manual and wiring diagrams supplied with individual items.
110-120V 3-Position Wall Switch 7 mm
220V 3-Position, Surface Mount Wall Switch 3.8 mm (1 1/2")
(2 3/4") 4.5 mm (1 3/4")
UP
3.2 mm (1 1/4")
3"-6" leads
11.8 mm (4 1/2")
8.6 mm (3 3/8")
DOWN
www.draperinc.com
(765) 987-7999
7.8 mm (3 1/16")
