Baronet/hw - Draper Inc.

Transcript

Baronet/HW Specifications—Baronet/HW projection screens, size h. x w., wall/ceiling mounting. Pentagonal case of 22 ga. steel, flat back design, with scratchresistant white polyester finish. Endcaps finished to match case, with integral roller brackets, concealing roller ends and matching universal mounting brackets. Electrically operated 3-wire motor mounted inside (15/8"/13/4") motor roller, instantly reversible, lifetime lubricated, with thermal overload protector and electric brake. Preset, accessible limit switches. Provided with 3-position wall switch for 110V AC or 220V AC. All screens shall be provided with a 6"-8" (15-20 cm) leads and 3-position wall switch. 110V unit certified by UL. 220V unit CE certified, and provided with 3-position, surface mount wall switch. Viewing surface to be flame and mildew resistant. Matt White XT1000E and optional Contrast Grey XH800E viewing surfaces shall qualify as low emitting and meet all of the requirements of the GREENGUARD for Children and Schools and GREENGUARD certification program, which are: emissions of total volatile organic compounds < 0.22 mg/m3, formaldehyde < 0.0135 ppm, total aldehydes < 0.043 ppm, individual volatile organic compounds < 1/1000 TLV and < ½ chronic REL and total phthalates < 0.01 mg/m3. Fabric attached to one-piece rigid steel roller with tape. Bottom of viewing surface attached to weighted dowel. Specifications subject to change without notice. Motor-in-Roller Electric Screen Dimensions & Data by Metric U.S. H x W (cm) H xW AV Format (1:1) 127 x 127 50" x 50" 152 x 152 60" x 60" 178 x 178 70" x 70" 213 x 213 84" x 84" 183 x 244 72" x 96" 244 x 244 96" x 96" Nominal Image Area Diagonal Metric (cm) U.S. NTSC/PAL Video Format (4:3) 6'/183 cm 108 x 144 42½" x 56½" 7'/213 cm 127 x 169 50" x 66½" 100"/254 cm 152 x 203 60" x 80" 10'/305 cm 175 x 234 69" x 92" HDTV Format (16:9) 65"/165 cm 1 81 x 144 31¾" x 56½" 73"/185 cm 1 91 x 163 36" x 64" 82"/208 cm 1 103 x 183 40½" x 72" 92"/234 cm 1 114 x 203 45" x 80" 106"/269 cm 1 132 x 234 52" x 92" 16:10 Format 67"/170 cm 1 90 x 144 35¼" x 56½" 76"/193 cm 1 102 x 163 40" x 64" 85"/216 cm 1 114 x 183 45" x 72" 94"/239 cm 1 127 x 203 50" x 80" 109"/277 cm 1 146 x 234 57½" x 92" Custom Size 1 Overall Size Metric (cm) Case Length cm U.S. Net Wt. kg lbs. Qty. U.S. 140 55¼" 166 65¼" 191 75¼" 227 89¼" 258 101¾" 258 101¾" Case Length cm U.S. 7 15 9 19 10 21 14 30 15 31 15 32 Net Wt. kg lbs. Qty. 118 x 151 136 x 177 163 x 212 185 x 244 46½" x 59½" 53½" x 69½" 64" x 83½" 73" x 96" 166 191 227 258 65¼" 9 75¼" 10 89¼" 14 101¾" 15 19 21 30 32 111 x 151 122 x 177 133 x 188 145 x 212 163 x 244 43¾" x 59½" 48" x 69½" 52½" x 74" 57" x 83½" 64" x 96" 166 191 202 227 258 65¼" 75¼" 79¾" 89¼" 101¾" 9 10 14 15 15 19 21 30 31 32 120 x 151 132 x 177 145 x 188 157 x 212 177 x 244 47¼" x 59½" 52" x 69½" 57" x 74" 62" x 83½" 69½" x 96" 166 191 202 227 258 65¼" 75¼" 79¾" 89¼" 101¾" 9 10 14 15 15 19 21 30 31 32 These sizes include 12" black drop as standard. Also available in 1.85:1, 2.35:1 and 15:9 Formats. Contact Draper. Case Dimensions and Methods of Installation 3¼" (83 mm) 3¾" 96 mm Please Check All Appropriate Selections Select Viewing Surface: Fabric width + 5¾" (146 mm) 3¼" (83 mm) Matt White XT1000E(1.0 gain): GREENGUARD for Children & Schools certified Glass Beaded CH3200E (3.2 gain) Argent White XH1500E (1.5 gain) Contrast Grey XH800E (0.8 gain): GREENGUARD for Children & Schools certified Radiant CT2900E (2.9 gain): Optional Other: __________________________________________________ Select Voltage: Viewing Surface 110V AC (UL certified) 220V AC (CE certified) Optional Accessories: Back hole for wall mounting. Hardware by others. Crimp both ends of “S” Hook Top Hole for suspended mounting. Hardware by others. 24V Low Voltage Control Radio Frequency Remote Control Infrared Remote Control 15 cm Mounting Brackets Black Masking Borders(Standard on NTSC, HDTV & WideScreen Sizes) Extra Screen Drop (Total screen height cannot exceed 244 cm/96") Same color as viewing surface (standard on AV format screens) Black (standard on all other formats) Length of extra screen drop required 15 cm Brackets 15 cm Please Note: If using "S" Hooks, for added safety, crimp both ends of the “S” hooks so the screen cannot come off. PROJECT: ARCHITECT: CONTRACTOR: SUPPLIER: Copyright © 2013 Draper Inc. Form BaronetHW_Sub13 Printed in U.S.A. DATE: REVISED: Baronet/HW by Draper Page 2 of 2 Wiring Diagrams Baronet/HW 110V AC Baronet/HW 220V AC (CE) Multiple Station Control Single Station Control Junction box at left end of screen Junction box at left end of screen Single Station Control Green (Motor Ground) Junction box at left end of screen CE Approved Junction box at left end of screen Internal Screen Wiring White (Common) Black (Down) Red (Up) Green (Motor Ground) Internal Screen Wiring White (Common) Black (Down) Red (Up) Multiple Station Control Not CE Approved Internal Screen Wiring Blue-220v (Common) Brown-220v (Down) Black-220v (Up) Internal Screen Wiring Blue-220v (Common) Brown-220v (Down) Black-220v (Up) Green/Yellow (Motor Ground) Green/Yellow (Motor Ground) Control switch Single gang box by others Min. 4" x 2-1/8" x 1-7/8" deep Blue Red Black Red Blue Black Blue Control switch Black Blue Dashed wiring by installer Single gang box by others Min. 4" x 2-1/8" x 1-7/8" deep. 3 shown. More or less equally feasible. Black 220v, 50 Hz. Location of key operated on-off switch if furnished Low Voltage, IR Remote or RF Remote (LVC-III)* Blue Black Dashed wiring by installer MC1* Internal Screen Wiring See separate Serial Communication-RS232 Instruction sheet for enabling RS232 with the MC1. White/Blue (Common) Red 110/Black 220 (Up) Black 110/Brown 220 (Down) Green/Yellow (Motor Ground) White or Blue-Common to screen & 110/220V AC Neutral Red-to screen (directional) Brown-to screen (directional) Yellow-to 110/220V AC-Hot Black-to 110/220V AC-Hot Green/Yellow (Ground) Aux Port for connecting additional LVC-III modules (up to six total can be linkedconnect from Aux to Eye). Red 220v, 50 Hz. To 110V AC Line Dashed wiring by electrician Low voltage wiring by others Eye Port for IR Eye, RF Receiver or LED Wall Switch. For more than one of these, a splitter is required. 3 Button Wall Switch DOWN - Black COM - White UP - Red Blue Hot Red Neutral Black Red Neutral Red To 110V AC Line Blue Red Dashed wiring by electrician Black Location of key operated on-off switch if furnished Cap off with wire nut & tape Cap off with wire nut and tape L1 Dashed wiring by electrician Internal Screen Wiring To 110/220V Line Program LED White or Blue-Common Red-to Screen (directional) Black-to Screen (directional) Brown-Hot to AC Green/Yellow-Ground STOP STOP Location of key operated on-off switch if furnished Fuse Low Voltage Wiring by others AC Wiring by electrician White/Blue (Common) Red 110/Black 220 (Up) Black 110/Brown 220 (Down) Green 110V/ Green/Yellow 220V (Motor Ground) RS232 Data FROM Control System RS232 Data TO Control System Signal Ground & Manual Switch Common Manual Switch Down Manual Switch Up Control Switches 24v DC MC1 Location of key operated on-off Eye Port for IR Eye. For RF Receiver or LED switch if furnished Wall Switch, a Splitter and a Power Supply is required. Plug RF Receiver or LED Wall Switch and Power Supply into splitter, then run cable from Splitter to MC1 Eye Port. To AC Line * For more information and wiring diagrams for low voltage multiple motors and network communication, please see Draper Screen and Lift Controls Planning Sheet, Draper Screens and Lift Controls Wiring Manual and wiring diagrams supplied with individual items. 110-120V 3-Position Wall Switch 220V 3-Position, Surface Mount Wall Switch 3.8 cm (1 1/2") 7 mm (2 3/4") 3.5 cm (1 3/4") UP 3.2 cm (1 1/4") 3"-6" leads 11.8 mm (4 1/2") 8.6 cm (3 3/8") DOWN www.draperinc.com (765) 987-7999 7.8 cm (3 1/16")