Preview only show first 10 pages with watermark. For full document please download

Basic Information And Cctv Camera Settings Main Information (xdsl Zyxel 660 Series)

   EMBED

Share

Transcript

Basic Information and CCTV Camera Settings (xDSL Zyxel 660 Series) Main Information 1. Subscribed Dynamic DNS (DDNS) (If the camera already has DDNS, no need to subscribe) 2. User & Password for DDNS 3. DVR IP equipment or CCTV camera (check at camera or manual) 4. Camera Port which has been set Settings as following:  Dynamic DNS setting as per item 1 and 2  Forward Port at xDSL router (Use figures from IP and port as per item 3 and item 4)  Router’s Firewall Dynamic DNS Setting Parameters from DDNS service e.g. DYNDNS, No-IP  DYNDNS << Click to see how to  No-IP << Click to see how to Example: after applied DYNDNS, 3 parameters to be filled in Router Hostname 1.1 Hostname which has be created, as above picture (choose either one host) 1.2 Username used for register 1.3 Password used for register Example picture Set up at Advanced > Dynamic DDNS      Activate Dynamic DNS Set www.dyndns.org for Service Provider Host Name from item 1.1 for My Host Name Username as in item 1.2 Password as in item 1.3 How to Forward Port for Zyxel Type http://192.168.1.1 at the Address bar then click Enter At Login page enter Password = password, then click Login and setting up Forward Port 1. Click at left menu Network > NAT > Port Forwarding and set up following parameters  Default Server Setup = Default Server  Service Name = WWW  Server IP Address = type LAN IP, click "Add" button 2. Type Port number at Start Port and End Port (ex. Port set up at 85) and click Apply 3. Click at the left menu Network > NAT > Port Forwarding, and Port set up page will appear How to set up Firewall and UPnP 1. Check Settings at Security > Firewall > Disable at SPI > click Apply Forward Port parameters will be used in Virtual Server menu 2. Check setting at Advance > UPnP Setup > Activate both then click Apply After the setup but CCTV camera cannot be viewed, check following 1. Check internet 2. Check CG NAT 3. Check to see if viewing through LAN (Computer connected in the same LAN and opened with IP Address and Port registered for Forward port) 4. Check Router if there is any forward port configuration 5. Check Router if there is DDNS configuration 6. Test Router if it allows UPnP service 7. Test IP ping WAN from received Router 8. Turn off Firewall Router and Firewall Windows 9. Turn off Anti- virus 10.Check Active X and current browser (should be IE)