Preview only show first 10 pages with watermark. For full document please download

Battery Powered Water Sensor V4

   EMBED

Share

Transcript

MECHANICAL LINE SOLUTIONS PURIFINER ALARM FITTING INSTRUCTIONS * Installation 1 2 3 4 5 Screw sensor probe into Purifiner ensuring bonded seal is fitted Site and fix control box in preferred position Run cable through to sensor and secure any spare cable Make connections to sensor terminals NB * Brown cable to central connector Slide protective sleeve over sensor assembly Operation Sequence Battery Test Water in Fuel Low Battery Press test button Press test button 2 beeps & 2 flashes continuous beeps & flashes single beep then a single beep every 30 seconds MECHANICAL LINE SOLUTIONS Horspath Road Ind Est., Pony Road, Cowley, OXFORD. OX4 2RD Tel: 08701 903090 Web: www.mlsltd.net AL LINE MECHANIC S SOLUTION TIONS LINE SOLU MECHANIC LUTIONS AL LINE SO R O S N E S WATER AL MECHANIC K N A T N W O D P O R D Instructions for use 1 Test the battery by connecting the central contact with the outer sleeve of the sensor *(see drawing). Alarm and light will activate to indicate battery is serviceable. * * 2 Connect earth terminal (clip) to a suitable earthing point when testing metal tanks. Conect to Earth 3 Lower sensor into the tank (cable is marked at 1mt intervals for guidance) 4 If water is detected, the alarm and light will activate Audible Warning Alarm Flashing Light 5 After use, clean and dry the sensor and cable before storing the unit in its case 6 Battery replacement- Always use a good quality battery. Slide cover off to replace battery. NB The sensor is suitable for use in both metal and plastic tanks For use with fuels having a viscocity between 2 & 5.35cST (@ 37.8 Deg C) and a minimum Flash Point (PM) of 55 Deg C. Caution This unit is not suitable for use with Petrol E SOLUTIO IONS NE SOLUT ANICAL LI MECH AL LIN MECHANIC K N A T N W O D P O DR NS LUTIONS AL LINE SO MECHANIC R O S N E S WATER E D B C A - Sensor B - Control unit A (Battery compartment) C - Cable Connection (ensure connections are clipped together before submerging into tank) D - Sensor Cable E - Earth connection F - Storage Box G - Extension Cable (Optional extra) F G MECHANICAL LINE SOLUTIONS Horspath Road Ind Est., Pony Road, Cowley, OXFORD. OX4 2RD Tel: 08701 903090 Web: www.mlsltd.net