Preview only show first 10 pages with watermark. For full document please download

Bb-1000l Pre-construction Wall Mount Back Box For Apad

   EMBED

Share

Transcript

BB-1000L Pre-Construction Wall Mount Back Box for APAD The BB-1000L back box provides a recess-mounted steel enclosure for the APAD LCD Controller. Designed for pre-construction applications, the BB-1000L permits fastening to the studs of a framed wall prior to installation of sheet rock. An assortment of knockouts is provided to accommodate conduit fittings, and a blank cover plate is included. SPECIFICATIONS Construction Vented metal box, front mounting plate with integral stud mounting flange, cover plate Dimensions* : Height: 6.35 in (16.13 cm): : Width: 7.16 in (18.19 cm) : : Depth: 3.31 in (8.41 cm) : * Dimensions shown are overall; consult the installation manual for actual cutout dimensions, clearances, and complete mounting instructions. Available Models BB-1000L [6500550]: Wall Mount Back Box for APAD [Limited Supply] Available Accessories MMK-1000L [6500634]: Mud Ring [Limited Supply] TMK-1000L [6500956]: Trim Ring [Limited Supply] www.crestron.com 800.237.2041 BB-1000L BB-1000LPre-Construction Pre-Construction Wall Mount Back Box for APAD Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647 Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905 www.crestron.com All brand names, product names and trademarks are the property of their respective owners. ©2016 Crestron Electronics, Inc. | 15 Volvo Drive | Rockleigh, NJ 07647 Specifications subject to change without notice. 5/5/2016