Transcript
6 7
DUAL ALARM DIGITAL CLOCK RADIO 1.2” LED DISPLAY
1
2
5
3
4
9 8
10
11
12
14
13
15
USER MANUAL
Thank you for purchasing a Buddee Digital Clock Radio. For optimum performance and safety, read these instructions carefully before connecting, operating or adjusting this product. Refer to this manual for future reference. INTRODUCTION Wake up how and when you like. With a large 1.2” LED display, checking the time is easy wherever you are in the room. Set alarms for multiple times of the day or night to ensure you wake up on time ready for your important appointments. The stylish and compact design fits easily on your bedside table, and simple functionality makes it easy to operate and set the time. FEATURES • Dual alarms • AM/FM radio • Sleep and snooze functions • 20 AM and 20 FM radio presets • Radio or buzzer alarms • Extra large 1.2” LED display PACKAGE CONTENTS Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton: • Main unit (Dual alarm digital clock radio) • Power cable • User manual
DEVICE FUNCTIONS 1. ON/OFF: Press to turn radio on, hold to turn radio off. BAND: With radio on, press to switch between AM and FM. 2. TIME: Set the time. PRESET: Set radio station presets. 3. P-: Select preset.
4. P+: Select preset.
5. SLEEP: Set radio to turn off after a specified time. SNOOZE: Temporarily stop alarm. DIM: Set display brightness. 6. VOL -: Decrease volume. AL 1: Set alarm 1. 7. VOL +: Increase volume. AL 2: Set alarm 2.
8. TUNING: Tune radio down. HOUR: Set hour. 9. TUNING: Tune radio up. MIN: Set minute. 10. PM indicator.
11. FM radio indicator.
12. ALARM 1 buzzer indicator. 13. ALARM 1 radio indicator.
14. ALARM 2 buzzer indicator. 15. ALARM 2 radio indicator.
TECHNICAL SPECIFICATIONS Power supply: AC 220V-240V 50Hz 5W Battery backup: 1.5V (AAA battery) x2 (not included) Radio frequency: FM 87.5 - 108MHz AM: 522 - 1620KHz
POWER
BATTERY BACKUP This unit requires 2 x AAA batteries as backup in the event of a power outage.
If there is a power failure, the time, alarm, and memory settings will not be affected. After AC power is restored, the unit will function normally with settings maintained. Note: If the unit will not be used for an extended period of time, disconnect from AC power and remove the batteries.
Made in China
© Buddee Gear 2016. All rights reserved. All trademarks are registered trademarks of respective manufacturers listed.
SETTING THE TIME 1. In standby mode, press and hold the TIME button, the display will flash. Set the time using the HR (hours) and MIN (minutes) buttons.
SETTING THE ALARMS 1. In standby mode, press ALARM 1 to set alarm to buzzer or radio. The corresponding indicator will light up and the display will blink.
Note: If no button is pressed for 4 seconds while setting the time, the time displayed will be saved.
3. Press ALARM 1 again to confirm and save.
2. Press the TIME button to confirm and save.
2. Set alarm time using the HR and MIN buttons.
Repeat steps 1 - 3 with ALARM 2 button to set alarm 2. STOPPING THE ALARMS 1. Press SNOOZE to temporarily stop the alarm. Alarm will sound again after 9 minutes.
2. Press OFF or ALARM 1/2 to stop the corresponding alarm. Alarm will sound again at the same time the next day. 3. In standby mode, press ALARM 1/2 repeatedly until the alarm indicator light is off to cancel the corresponding alarm permanently. USING THE RADIO In standby mode, press the ON/OFF/BAND button to turn on the radio. The radio will play on the FM band and the FM indicator will light up. Press the ON/OFF/BAND button to switch between FM and AM. Adjust the volume using the Volume + and buttons. To turn off the radio, hold the ON/OFF/BAND button. MANUAL SEARCH Tune to desired radio station using the Tuning + and - buttons.
AUTOMATIC SEARCH Press and hold either the Tuning + or Tuning - button to automatically search for stations with strong signals. To search for stations with weak signals, use manual search as above. To enhance radio reception, extend the wire antenna or move to a location where it can capture a stronger signal.
PRESET STATIONS This unit can store up to 20 radio presets for each AM and FM. STORE PRESETS 1. Tune to the desired radio station.
2. Hold the PRESET button for 1 second, P01 will blink on screen. 3. Select the desired preset number using the P+ and Pbuttons. 4. Press the PRESET button to save.
5. Repeat steps 1 - 4 to save up to 19 more presets. LISTEN TO PRESETS Press PRESET, P01 will blink on screen.
Press PRESET repeatedly, or P+/P- to reach desired preset.
SLEEP FUNCTION To fall asleep to the radio, turn on and tune radio to the desired station, then press SLEEP repeatedly to set the sleep time (90-80-70-60-50-40-30-20-10-OFF minutes). The radio will automatically turn off after the specified time. To cancel the sleep function, repeatedly press the SLEEP button until the display shows off.
