Preview only show first 10 pages with watermark. For full document please download

Bea-635 350 Watt

   EMBED


Share

Transcript

Industrial PC power supplies BEA-635 Extended Extended Operation Operation AC input 350 Watt Noise immunity for industrial sectors High-quality electrolytic capacitors (+105 °C) Operating temperature -10…+70 °C The 350 W PC power supply BEA-635 is distinguished by very high reliability and long service life. By its integrated 4 kV surge input filter the BEA-635 is also suitable for highly demanding industrial applications. Within an ambient temperature range of -10 up to +50 °C full power can be supplied continuously without restrictions. The temperature regulated ball-bearing fan provides a tacho signal and can continuously be monitored by the board, which is very important with regard to system reliability. Te c h n i c a l d a t a Input voltage Input frequency Input current Inrush current Efficiency Hold up time Power-Good-Signal Protection Insulation voltage Earth leakage current Safety / EMC Temperature Derating MTBF Max. operation altitude Humidity Dimensions (W x D x H) Weight (net) Article No. BEA-635 90…264 V AC, active PFC 47…63 Hz 7 A (115 V AC) / 3.5 A (230 V AC) 48 A (115 V AC) / 88 A (264 V AC) ≥75 %, 230 V AC / ≥70 %, 115 V AC (full load) >16 ms Switch on delay 100…500 ms Switch off delay 1 ms Short circuit protection: At each output, switch off / +5 Vsb, auto-recovery Overload protection: 110…150 %, switch off Overvoltage protection: +3.3 V (+3.9…+4.3 V), +5 V (+5.7…+6.5 V), +12 V (+13.6…+15 V) Input / Chassis 3100 V DC Input / Output 4242 V DC <3.5 mA, 115 V AC / 230 V AC TÜV, UL, CE, CCC, EN 61000-6-2, EN 61000-6-4 Operating: -10…+70 °C / Storage: -20…+80 °C Between +50…+70 °C, 1 % / °C 180 000 h according to MIL-HDBK-217F at +50 °C without fan 2000 m Operating: 10…85 % RH, non-condensing / Storage: 10…90 % RH, non-condensing 150 x 140 x 86 mm ±0.5 mm 1.95 kg Output voltage +3.3 V +5 V +12 V -12 V -5 V +5 Vsb Output current min max 0 A 28 A 0.5 A 35 A 0.5 A 26 A 0 A 0.8 A 0 A 0.5 A 0A 2 A Load regulation ±5 % ±5 % +7/-5 % ±5 % ±5 % ±5 % Ripple & Noise 50 mV 50 mV 120 mV 150 mV 150 mV 50 mV Max. output is 350 W, combined max. output current at +3.3 V and +5 V must not exceed 45 A. For temperatures <20 °C a higher minimal output current is required. Ripple and Noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 220 µF electrolytic capacitor and 0.1 µF ceramic capacitor at each output. During a cross regulation test we recommend to keep the channel with higher output load at 80 % of its max. power and the channel with lower output load at 20 % of its max. power. As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards. Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel.   +49 906 70595-0 | [email protected] |  www.bicker.de Industrial PC power supplies Drawing BEA-635 AC input Cable harness BEA-635 ATX / EPS, 500 mm 20+4 pin P4, 550 mm Specification is subject to change without notice. Errors excepted. Status as at: 27.11.2015 SATA, 450 mm SATA, 200 mm HD, 430 mm HD, 150 mm HD, 150 mm BLACK RED RED RED WHITE BLACK BLACK BLACK GREEN BLACK BLUE ORANGE (GND) (+5V) (+5V) (+5V) (–5V) (GND) (GND) (GND) (PSon) (GND) (-12V) (+3,3V) 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 YELLOW YELLOW (+12V) (+12V) 4 3 2 1 ORANGE BLACK RED BLACK A1 YELLOW RED BLACK BLACK YELLOW 4 3 2 1 4 3 2 1 (GND) (GND) 4 3 2 1 (+5V) (GND) (GND) (+12V) 4 3 2 1 RED BLACK BLACK YELLOW (+5V) (GND) (GND) (+12V) 4 3 2 1 YELLOW BLACK BLACK RED (+12V) (GND) (GND) (+5V) RED ORANGE ORANGE BLACK BLACK BLACK RED BLACK BLACK YELLOW 4 3 2 1 (+5V) (GND) (GND) (+12V) (+5V) 4 RED (GND) 3RED BLACK (+5V) (GND) 2BLACK BLACK (GND) (+12V) 1BLACK YELLOW (GND) YELLOW (+12V) YELLOW (+12V) BLACK (+5V) 4 RED (GND) BLACK (GND) 3 BLACK(+5V)(GND) RED (GND) 2 BLACK (+5V) (+12V) 6 RED1 YELLOW 5 ORANGE (+3,3V) 4 YELLOW (+3,3V)(+12V) 4 ORANGE 3 BLACK (GND) (GND) (GND) 3 BLACK 2 BLACK 1 RED (GND) (+5V) 2 BLACK (+5V) (GND) (GND) (+12V) BLACK N.C. WHITE Fan signal, 580 mm (+5V) 4 RED (GND) 3 BLACK (GND) 2 BLACK (+12V) 1 YELLOW 4 3 2 1 AUX, 550 mm (+5V) (GND) (GND) (+12V) 4 RED (+5V) 3RED BLACK (+5V) (GND) 2BLACK BLACK (GND) (GND) 1BLACK YELLOW (GND) (+12V) YELLOW (+12V) 4 RED (+5V) 4 3 RED BLACK (+5V) (GND) 3 2 BLACK BLACK (GND) (GND) 2 1 BLACK YELLOW (GND) (+12V) 1 YELLOW (+12V) 4 3 2 1 RED BLACK BLACK YELLOW (+3,3V) REDORANGE (+5V) BLACK (GND) (GND) BLACK RED (GND) (+5V) BLACK BLACK (GND) YELLOW (+12V) A1 YELLOW (+12V) 4 3 2 1 (+5V) (GND) (GND) (+12V) RED BLACK BLACK YELLOW RED BLACK BLACK YELLOW 6 5 4 3 2 1 BLACK BLACK (+3,3V) (GND) (+5V) (GND) (+12V) 4 3 2 1 HD, 400 mm HD, 150 mm FDD, 150 mm (+3,3V) (+12V1) (+12V1) (+5Vsb) (PG) (GND) (+5V) (GND) (+5V REMOTE SENSE) (+5V) (GND) (+3,3V) (+3,3V REMOTE SENSE) (+3,3V) (+3,3V) (GND) (+5V) (GND) (+12V) ORANGE BLACK RED BLACK A1 YELLOW 4 3 2 1 ORANGE YELLOW YELLOW PURPLE GREY BLACK RED BLACK RED RED BLACK ORANGE ORANGE ORANGE BLACK (GND) 24 12 ORANGE (+3,3V) RED (+5V) 23 11 YELLOW (+12V1) RED (+5V) 22 10 YELLOW (+12V1) (+5Vsb) RED (+5V) 21 9 PURPLE (PG) WHITE (–5V) 20 8 GREY (GND) BLACK (GND) 19 7 BLACK (+5V) BLACK (GND) 18 6 RED (GND) BLACK (GND) BLACK 17 5 BLACK (PSon) (GND)16 24 12 (+5V(+3,3V) REMOTE SENSE) GREEN REDORANGE RED (GND) (+5V) 15 23 4 11 BLACK REDYELLOW(+5V)(+12V1) (+12V1) RED (+5V) YELLOW 22 10 BLUE (-12V) 14 3 BLACK (GND) (+5Vsb) RED (+5V) PURPLE 21 9 ORANGE (+3,3V) 13 2 ORANGE (+3,3V) (PG) WHITE (–5V) 20 8 GREY (+3,3V REMOTE SENS 1 ORANGE (GND) BLACK (GND) 19 7 BLACK (+3,3V) ORANGE (+5V) BLACK (GND) 18 6 RED (GND) BLACK (GND) BLACK 17 ±0.5mm 5 Tolerance (+5V REMOTE SEN YELLOW 2 BLACK (GND) GREEN(+12V) (PSon)4 16 RED 4 RED BLACK (+12V) (GND) 3 15 (+5V) YELLOW 1 BLACK (GND) BLUE (-12V) 14 3 BLACK (GND) ORANGE (+3,3V) 13 2 ORANGE (+3,3V) ORANGE (+3,3V) ORANGE (+3,3V REMOTE SE 1 BLACK (GND) ORANGE (+3,3V) RED (+5V) BLACK (GND) (+12V) 4 2 BLACK (GND) A1 YELLOW YELLOW (+12V) YELLOW (+12V) 3 1 BLACK (GND) ORANGE (+3,3V) BLACK (+3,3V) (GND) ORANGE RED (+5V) BLACK (GND) BLACK (+5V) (GND) RED A1BLACK YELLOW(GND) (+12V) A1 YELLOW (+12V) (GND) 1 BLACK 6 RED (+5V) 5 ORANGE (+3,3V) 4 ORANGE (+3,3V) 3 BLACK (GND) 2 BLACK (GND) 1 BLACK (GND) BLACK N.C. WHITE Tolerance ±20 mm (+5V) (+3,3V) (+3,3V) (GND) (GND) (GND) Optional accessory  For detailed information please visit our website www.bicker.de and refer to the article number. Article No. Description BLACK N.C. WHITE X1-132 Power cord with European IEC-60320-C13 connector Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel.   +49 906 70595-0 | [email protected] |  www.bicker.de