Transcript
BeA Pocket Catalogue Professional Tools and Fasteners
Table of Contents BeA Fine-Wire Staplers
4–5
BeA Medium-Wire Staplers
6
BeA Heavy-Wire Staplers
7
BeA Wide-Crown Staplers
8–9
BeA Pinners
10
BeA – Professional Tools and Fasteners
BeA Brad Nailers
The Complete Range of Fastening Solutions for Professionals
BeA T-Nailers and BeA-Nailers for Corrugated Fasteners
13
BeA Coil Nailers
14
BeA Strip Nailers
15
BeA was established in 1910 in Germany. Since then BeA stands for highest quality tools and fasteners, excellent support and quick service. Our tools and fasteners are easy to use and perform with excellent results. They speed up your manufacturing processes and make them safer and more economical. Our tools are tested in various tough environments. Our international network of fastening specialists can prepare a value package of products, services and pricing that exceeds your expectations. For more information Tel. +1 336 510 4232 Fax +1 336 510 4233 E-Mail:
[email protected] Visit: www.bea-group.com BeA quality conforms to ISO 9001 standard and is certified by the German TÜV.
11 – 12
BeA Nailers for Special Applications
16 – 18
BeA Hand- and Hammer Tackers
19
BeA Screwdrivers and Collated Screws
19
BeA Automatic Systems
20 – 21
BeA Hotmelt Technology
22
BeA Compressors
22
BeA Machines for Crates and Pallets
23
BeA Dynamik Gas Technology
24 – 25
made in Germany
Joh. Friedrich Behrens AG Industrial Fastening Systems Bogenstraße 43 – 45 22926 Ahrensburg Germany
Power. Speed. Balance. Reliability.
BeA is a member of:
By courtesy of the EPAL Ass.
SYPAL
VBT
1/4" – 1"
Weight (Lbs.): 2.07 – 3.31 Capacity: 157 – 340 staples Lengths: 1/4" – 1"
Weight (Lbs.): 2.1 – 3.09 Capacity: 114 – 208 staples Lengths: 1/4" – 5/8"
0.036 x 0.028 Versions available: safety yoke, blocked nose, long nose, long magazine, automatic, automatic with long magazine 1/2"
Weight (Lbs.): 3.08 Capacity: 160 staples Lengths: 1/4" – 5/8"
1/4" – 5/8"
Pneumatic pliers for staples type 80 / 380 / 20GA
0.050 x 0.020
1/2"
Pneumatic pliers for staples type 95 / .050 Flat / 20 GA
Versions available: long magazine
0.050 x 0.020
3/8"
1/4" – 5/8"
Pneumatic staplers for staples type 71 / 22GA Weight (Lbs.): 2.07 – 3.09 Capacity: 190 – 380 staples Lengths: 1/4" – 5/8"
Versions available: safety yoke, automatic with long magazine
Weight (Lbs.): 3.08 Capacity: 114 – 214 staples Lengths: 1/4" – 5/8"
0.036 x 0.028
1/2"
Pneumatic staplers for staples type 95 / .050 Flat / 20 GA 1/4" – 5/8"
1/2"
Pneumatic staplers for staples type 80 / 380 / 20GA
Staplers for Fine-Wire Staples
1/4" – 5/8"
Staplers for Fine-Wire Staples
0.0295 x 0.024 Versions available: safety yoke, blocked nose, automatic, automatic with long magazine
Weight (Lbs.): 1.98 – 3.5 Capacity: 100 – 360 staples Lengths: 1/4" – 1"
0.0295 x 0.024 Versions available: safety yoke, blocked nose, automatic, automatic with long magazine 3/16"
Weight (Lbs.): 2.07 Capacity: 190 staples Lengths: 1/4" – 5/8" Versions available: with sole attachment
4
1/4" – 5/8"
Pneumatic stapler for staples type 74 / 22GA
0.0295 x 0.024
1/4" – 1"
1/4" – 5/8"
Weight (Lbs.): 2.07 – 3.09 Capacity: 190 – 380 staples Lengths: 1/4" – 5/8"
3/16"
Pneumatic staplers for staples type 97 / 20GA
0.036 x 0.028 Versions available: safety yoke, long magazine, automatic
5/16"
Pneumatic stapler for staples type 98 / 20GA Weight (Lbs.): 2.64 Capacity: 168 staples Lengths: 3/8" – 1"
3/8" – 1"
1/2"
Pneumatic staplers for staples type 72 / 22GA
0.036 x 0.028 Versions available: safety yoke, long magazine, automatic
5
Weight (Lbs.): 3.3 – 7.05 Capacity: 110 – 173 staples Lengths: 1/2" – 2"
0.050 x 0.041 Versions available: safety yoke, long magazine, automatic, automatic with long magazine
Weight (Lbs.): 2.64 – 4.63 Capacity: 157 – 244 staples Lengths: 3/8" – 1 1/2" Versions available: safety yoke, long magazine, automatic, automatic with long magazine
5/16" 3/8" – 1 1/2"
Pneumatic staplers for staples type 92 /18GA
0.057 x 0.051 Versions available: long magazine, automatic, automatic with long magazine, Rapid-Clip- and Nosag attachment
Pneumatic staplers for staples type 155 /16GA Weight (Lbs.): 3.09 – 7.05 Capacity: 110 – 173 staples Lengths: 3/4" – 2 1/2"
0.050 x 0.041
7/16"
Pneumatic staplers for staples type 14 /16GA 1/2" – 2"
Weight (Lbs.): 2.64 – 4.2 Capacity: 120 – 215 Staples Lengths: 3/8" – 1 1/2"
1/4" 3/8" – 1 1/2"
Pneumatic staplers for staples type 90 /18GA
Staplers for Heavy-Wire Staples
7/16" 3/4" – 2 1/2"
Staplers for Medium-Wire Staples
0.062 x 0.057 Versions available: long-magazine, automatic, automatic with long magazine, Rapid-Clip- and Nosag attachment 7/16"
Weight (Lbs.): 3.09 – 7.05 Capacity: 110 – 173 staples Lengths: 1" – 2 1/2"
1" – 2 1/2"
Pneumatic staplers for staples type 16 /16GA
0.063 x 0.053 Versions available: long-magazine, automatic, automatic with long magazine
Weight (Lbs.): 3.52 Capacity: 125 staples Lengths: 5/8" – 1 1/4"
9/16" 5/8" – 1 1/4"
Pneumatic stapler for staples type 94 /18GA
0.050 x 0.041
1/4" – 5/8"
Weight (Lbs.): 3.52 Capacity: 184 staples Lengths: 1/4" – 5/8"
0.062 x 0.023
6
Pneumatic staplers for staples type 180 /15GA Weight (Lbs.): 7.05 – 8.38 Capacity: 122 – 130 Staples Lengths: 1 5/8" – 3 5/32"
7/16" 1 5/8" – 3 5/32"
1/2"
Pneumatic pliers for staples type 110 /18GA
0.072 x 0.064
7
Weight (Lbs.): 5.73 Capacity: 148 staples Lengths: 9/16" – 1 1/2"
1" 9/16" – 1 1/2"
Pneumatic stapler for staples type 42 /16GA
Staplers for Wide-Crown Staples
Weight (Lbs.): 5.29 Capacity: 148 staples Lengths: 1/2"
0.077 x 0.037
1 1/4"
Pneumatic stapler for EPAL-staples type 33*
*only supplied by the EPAL Association
1/2"
Staplers for Wide-Crown Staples
0.128 x 0.047
Staplers for Carton Closing Staples
0.090 x 0.040
Weight (Lbs): 3.74 – 5.84 Capacity: 120 staples Lengths: 5/8" – 3/4"
0.059 x 0.057
0.090 x 0.040
Pneumatic stapler for carton closing coils Weight (Lbs.): 5.22 Capacity: 1,000 staples Lengths: 1 1/4" – 1 3/8"
Weight (Lbs.): 11.0 Capacity: 120 staples Lengths: 2" – 5 3/16"
1 1/8" 2" – 5 3/16"
Pneumatic stapler for staples type 246 /14GA
1 1/4"
Pneumatic staplers for staples type C (Clincher) 5/8" – 3/4"
2" – 3 5/32"
Weight (Lbs.): 6.6 Capacity: 210 staples Lengths: 2" – 3 5/32"
1"
5/8" – 7/8"
Weight (Lbs.): 3.74 – 5.84 Capacity: 100 staples Lengths: 5/8" – 7/8"
0.057 x 0.051
Pneumatic stapler for staples type 146 /17GA
1 3/8"
Staplers for staples type A (Packfix)
1 1/4" – 1 3/8"
Weight (Lbs.): 6.17 Capacity: 218 staples Lengths: 1/2" – 1 1/2"
1" 1/2" – 1 1/2"
Pneumatic stapler for staples type 140 /17GA
0.087 x 0.072
8
9
Weight (Lbs.): 2.43 Capacity: 130 pins Lengths: 1/2" – 1 3/8"
Pneumatic nailer for brads type SK 200 / 20GA 5/8" – 3/4"
Pneumatic pinner for pins type S 600 / 22GA
Brad Nailers
1/2" – 1 3/8"
Pinners
Weight (Lbs.): 2.2 Capacity: 168 brads Lengths: 5/8" – 3/4"
0.025 x 0.024
0.036 x 0.028
3/8" – 2 5/32"
Pneumatic nailers for brads type SK 300 /18GA Weight (Lbs.): 1.76 – 3.46 Capacity: 80 – 125 brads Lengths: 3/8" – 2 5/32"
Weight (Lbs.): 2.23 Capacity: 160 pins Lengths: 3/8" – 11/16"
Pneumatic nailer for brads type SKAM 300 /18 GA Weight (Lbs.): 3.08 Capacity: 120 brads Lengths: 7/8" – 2"
0.0295 x 0.023
7/8" – 2"
Pneumatic pinner for pins type S 700 / 23GA
3/8" – 11/16"
0.050 x 0.041
0.049 x 0.039
Weight (Lbs): 2.86 Capacity: 126 pins Lengths: 9/16" – 1"
9/16" – 1"
Pneumatic pinner for pins type S 100 /18GA
Weight (Lbs.): 4.85 Capacity: 90 pins Lengths: 7/8" – 2 1/2"
0.098
10
Pneumatic nailers for brads type SK 400 /16GA Weight (Lbs.): 3.35 – 4.85 Capacity: 100 brads Lengths: 1" – 2 1/2"
1" – 2 1/2"
Pneumatic pinner for pins type S 500 /10GA
7/8" – 2 1/2"
0.045 x 0.036
0.064 x 0.056
11
Brad Nailers
T-Nailers
Weight (Lbs.): 3.09 Capacity: 120 brads Lengths: 7/8" – 2"
1/2" – 2 1/2"
Pneumatic nailers for T-nails 7/8" – 2"
Pneumatic nailer for brads type SKAM 400 /16GA
Weight (Lbs): 5.95 – 7.50 Capacity: 82 – 103 T-nails Lengths: 1/2" – 2 1/2"
0.061 x 0.061
0.086
0.086
Weight (Lbs.): 6.17 Capacity: 75 corrugated fasteners Lengths: 1/4" – 1/2"
Pneumatic nailer for corrugated fasteners type W
3/4" 1/4" – 1/2"
Weight (Lbs.): 4.85 Capacity: 100 brads Lengths: 1 3/8" – 2 1/8"
Pneumatic nailer for corrugated fasteners type WM
1" 3/8" – 5/8"
Pneumatic nailer for brads type SK 500 /14GA
1 3/8" – 2 1/8"
Nailers for Corrugated Fasteners
Weight (Lbs.): 6.61 Capacity: 77 corrugated fasteners Lengths: 3/8" – 5/8"
0.070
1 3/8" 3/4" – 1"
Weight (Lbs.): 4.18 Capacity: 100 brads Lengths: 1" – 2 1/8"
Pneumatic nailer for corrugated fasteners type W Maxi
1" – 2 1/8"
Pneumatic nailer for 34° brads type SKDA 600 /13GA
Weight (Lbs.): 8.15 Capacity: 100 corrugated fasteners Lengths: 3/4" – 1"
Weight (Lbs.): 3.30 Capacity: 80 brads Lengths: 3/4" – 2"
3/4" – 2"
Pneumatic nailer for steel brads type SKS 600 /13GA
0.072
12
13
Weight (Lbs.): 4.85 – 12.12 Capacity: 300 – 350 nails Lengths: 1" – 4"
3/4" – 1 3/4"
Pneumatic nailer for wire-welded roofing nails Weight (Lbs.): 5.51 Capacity: 120 nails Lengths: 3/4" – 1 3/4"
Weight (Lbs.): 5.51 Capacity: 28 nails Lengths: 1 5/8" – 2 3/8"
1 5/8" – 2 3/8"
Positive placement nailer for anchor strip nails type R20 1" – 4"
Pneumatic nailers for wire-welded round head nails
Strip Nailers
Pneumatic nailers for round head nails type R20 Weight (Lbs.): 7.94 – 15.43 Capacity: 50 – 72 nails Lengths: 2" – 6 3/8"
2" – 6 3/8"
Coil Nailers for Round Head Nails
Weigh (Lbs.): 2.65 – 7.28 Capacity: 200 – 350 nails Lengths: 3/4" – 3 5/8"
Pneumatic nailer for paper-collated D-head nails Weight (Lbs.): 7.93 Capacity: 90 nails Lengths: 2" – 4"
2" – 4"
Pneumatic nailers for plastic-collated nails type TC
3/4" – 3 5/8"
0.122
14
1 5/8" – 4"
Weight (Lbs.): 5.07 Capacity: 50 nails Lengths: 1 5/8" – 4"
1 5/8" – 4"
Pneumatic (anchor) nailer for plastic-collated nails
15
Pneumatic hog ring pliers for staples type CL 22
7/16" + 9/16"
Pneumatic nailer for expanding inserts MN 6
Hog Ring Pliers
Weight (Lbs.): 3.96 Capacity: 28 inserts Lengths: 7/16" + 9/16"
1/2" 7/8"
Nailers for Expanding Inserts
Weight: 3.96 lbs Capacity: 50 hog rings Lengths: 1/2"
Nailers for Shelf Support Studs
Weight (Lbs.): 3.96 Capacity: 25 studs Lengths: 3/8" + 1/2"
7/8" + 1" 3/8"
Pneumatic hog ring pliers for staples type CL 24
3/8" + 1/2"
Pneumatic nailer for shelf support studs
Weight (Lbs.): 3.52 Capacity: 140 hog rings Lengths: 3/8" 0.083
Pneumatic nailer for cable clips type KS Weight (Lbs.): 3.52 Capacity: 84 Staples and 50 cable clips Lengths: 1/2" – 5/8"
1/2" – 5/8"
Cable Nailers
Clip Pliers Pneumatic clipper for different spring clips Weight (Lbs.): 4.62 Capacity: 50 clips
Ask for our detailed brochure
Nailers for Deco-Nails
Weight (Lbs.): 3.8 Capacity: 100 nails Lengths: 9/16"
16
3/8" 9/16"
Pneumatic nailer for deco-nails type ZN 100
0.059
17
Manual Hand- and Hammer Tackers Hand tacker for staples type 53
3/8" – 1 3/8"
Pneumatic tool for brads type SK 300 with glazier attachment Weight (Lbs.): 1.9 Capacity: 100 brads Lengths: 3/8" – 1 3/8"
Weight (Lbs.): 0.66 Capacity: 156 staples Lengths: 1/4" – 9/16"
7/16" 1/4" – 9/16"
Glazier Tool
0.050 x 0.041
Bar-Code Tool
Weight (Lbs.): 1.10 Capacity: 157 staples Lengths: 1/4" – 1/2"
3/8"
Weight (Lbs.): 1.9 Capacity: 157 staples Lengths: 3/8"
7/16"
Hammer tacker for staples type 11 and 37 1/4" – 1/2"
1/2"
Pneumatic tool for staples type 380 / 20GA
0.036 x 0.028
Flaring Staplers
Industrial Screwdrivers 5/16"
Weight (Lbs.): 2.20 – 3.09 Capacity: 160 staples Lengths: 5/32" – 1"
5/32" – 1"
Pneumatic staplers for staple 80/380 and 92
0.050 x 0.041
Electrical screwdrivers for collated screws from 5/8" – 3" Weight (Lbs.): 3.97 – 6.17 Capacity: 50 screws Lengths: 5/8" – 3"
Staplers for Plastic Staples
Weight (Lbs.): 2.20 Capacity: 76 staples Lengths: 3/8" + 5/8"
7/16" 3/8" + 5/8"
Pneumatic stapler for plastic staples type P8
0.064 x 0.058
18
19
Modular tool changeover cassette Magazine capacity from 1.900 – 2.300 staples in lengths from 1 1/2" – 2 1/2"
Magazine capacity up to 500 staples in lengths from 1 3/4" – 2 1/2"
20
Modular tool 1 5/6" – 4"
Modular tool strip nailer Magazine capacity up to 140 strip nails in lengths from 1 5/6" – 4"
5/32" – 1"
Modular tool skater
1 3/4" – 2 1/2"
Magazine capacity up to 10.000 fasteners in lengths from 5/32" – 2 1/2"
Magazine capacity from 300 – 500 staples in lengths from 5/32" – 1"
Robotic self reloading system up to 20.000 fasteners in lengths from 5/16" – 2 1/2"
5/16" – 2 1/2"
Modular tool top loader
5/32" – 4 3/8"
Magazine capacity up to 5.000 fasteners in lengths from 5/32" – 4 3/8"
Modular tool clinching unit
5/32" – 2 1/2"
Modular tool side loader
for plastic and wire collated nails in lengths from 1 3/4" – 3 5/8" magazine capacity up to 1.100 nails
1 1/2" – 2 1/2"
Magazine capacity approx. 300 – 500 fasteners in lengths from 5/32" – 5 3/16"
Modular tool for jumbo coils
5/32" – 5 3/16"
Modular tool long magazine
Automatic Systems
1 3/4" – 3 5/8"
Automatic Systems
21
Hotmelt Glue Guns Hotmelt glue guns for sticks of 1/2" Ø
Mobile Compressors Ø: 1/2"
Weight (Lbs.): 0.66 – 1.32
Hotmelt glue guns for sticks of 1 3/4" Ø
“The” construction compressor BeA KV 350-15 Weight (Lbs.): 110 Air displacement: 350 l / Min.
Ø: 1 3/4"
Weight (Lbs.): 2.65 - 3.31
Machines for Crates and Pallets Crate and case machine different versions to produce cases, gates, crates, shelving, sheds and top decks
Mobile Compressors One cylinder compressors
VAB Pallet machines
Weight (Lbs.): 20 – 84 Air displacement: 160 – 285 l / min
for numerous pallet specifications also possible with stacker and branding station
Two cylinder compressors Weight (Lbs.): 104 – 165 Air displacement: 300 – 500 l / min.
22
23
Gas Nailer for Wood
Gas Technology Fuel Cells 2" – 3 1/2"
Cordless nailer dynamik D90S-680E for D-head nails
Weight (Lbs.) 7.9 Capacity: 36 nails Lengths: 2" – 3 1/2"
Cordless nailer dynamik R90 long magazine for strip nails Weight (Lbs.): 8.4 Capacity: 55 nails Lengths: 2" – 3 1/2"
D-head nail packs 2" – 3 1/2"
Cordless nailer dynamik R90 short magazine for strip nails
Competitive nail packs D-head nails from 2" – 3 1/2" and fuel cell(s) e.g. for Dynamik D90S
D-head nail buckets 2" – 3 5/8"
Weight (Lbs.): 7.9 Capacity: 67 nails Lengths: 2" – 3 1/2"
Different fuel cells for use in Dynamik D90, R90 and CN60 tools and to fit in the most fuel cell driven nailers including Pulsa 700 and Pulsa 1000
New: D-head nails from 2" – 3 1/2" and fuel cell(s) e.g. for Dynamik D90S in a useful and water resistant bucket
Cordless nailer dynamik CN60-688ES for steel-nails Weight (Lbs.): 8.16 Capacity: 40 nails Lengths: 5/8" – 2 1/4"
24
5/8" – 2 1/4"
Gas Nailer for Concrete / Steel Concrete nails packs Steel nails from 1 1/16" – 2 1/4" and fuel cell(s) for Dynamik CN 60 also to fit in: Spit Pulsa 1000 and Powers Trak-it packs also available for Spit Pulsa 700
25
26 WM 3/4" W 1" 95 1/2" 110 1/2"
W Maxi 1 3/8" SK 500
Packfix (A) 1 3/8" Carton Closing Coils
S 100 S 700 2" – 6 3/8"
3/4" – 4"
D
SKAM 300 SKAM 400 SKS 600
BT
Clincher (C) 1 1/4"
1" – 2 1/2"
1" – 4"
2" – 4"
Anchor
3/4" – 2"
7/8" – 2"
S 500 1 5/6" – 2 3/8"
3/4" – 1 3/4"
1/2" – 2 1/2"
1/4"
DPN
7/16" + 9/16"
3/8" + 1/2"
KS
3/8" –11/16"
180 7/16"
7/8" – 2"
SK 400
1 3/8" – 2 1/2"
9/16" – 1"
1/2" – 1 3/8"
7/8" – 2 1/2"
T-Nails
1 1/16" – 2 1/4"
74 3/16" SK 300
1" – 2 1/2"
SK 200
1 1/4" + 1 3/8"
98 5/16"
ZN 100 3/8"
5/8" – 7/8"
72 1/2"
246 1 1/8"
3/8" – 2 5/32"
94 9/16"
5/8" – 1 3/16"
2" – 3 5/32"
1" – 2 1/2"
3/4" – 2 1/2"
1/2" – 2"
146 1"
1/2" – 5/8"
97 3/16" 1 5/8" – 3 5/32"
2" – 5 3/16"
42 1"
1/4" – 5/8"
71 3/8" 5/8" – 1 1/4"
92 5/16"
1/4" – 5/8"
80/380 1/2"
3/8" – 1"
90 1/4"
1/4" – 5/8"
1/4" – 1"
3/8" – 1 1/2"
3/8" – 1 1/2"
9/16" – 1 1/2"
16 7/16"
5/8" – 7/8"
CL 22 7/8" 1/4" – 5/8"
1/4" – 1"
1/2" – 1 1/2"
140 1"
1/4" – 5/8"
3/8"
155 7/16"
3/4" – 1"
1/2" 14 7/16"
3/8" – 5/8"
1/4" – 1/2"
Fasteners Fasteners BDC TC R20
S 600
SKDA 600
CL 20/24 7/8" + 1" MN6
Concrete Nails
27
BeA Fasteners USA Inc. Industrial Fastening Systems
2100 – 120 Fairfax Road Suite A – D, Greensboro, NC 27407, USA T.: +1 336 510 4232, F.: +1 336 510 4233
[email protected], www.bea-group.com
