Transcript
Power supplies
5 5
Extended Delivery
YEARS
Extended
YEARS
BEN/BEND
Fanless Delivery
Fanless Operation
Operation
5–60 Watt
PCB mounting
The BEN/BEND are compact and fully encapsulated modules with a universal power input from 85…264 VAC and 120…370 VDC respectively. The modules in the power range up to 60 W are available for PCB mounting as well as with terminal blocks and a detachable DIN Rail mounting plate. The modules comply with international safety and EMC standards and provide a cost-effective and spacesaving solution for demanding environmental conditions.
DIN-Rail Chassis Print
Article Dimensions Power Output Output Ripple & Noise No. (W x D x H) voltage current (max) (typ) BEN-0505 +5 V 1.00 A <50 mVss BEN-0512 +12 V 0.42 A <50 mVss 48 x 36 x 20.5 mm 5W BEN-0515 +15 V 0.33 A <50 mVss BEN-0524 +24 V 0.23 A <50 mVss
Efficiency (typ) 75 % 79 % 80 % 82 %
BEN-1005 +5 V BEN-1012 +12 V 55 x 45 x 21 mm 10 W BEN-1015 +15 V BEN-1024 +24 V
2.00 A 0.90 A 0.70 A 0.45 A
<50 mVss <50 mVss <50 mVss <50 mVss
76 % 80 % 81 % 82 %
BEN-2005 +5 V 3.50 A BEN-2012 +12 V 1.60 A 70 x 48 x 23.5 mm 20 W BEN-2015 +15 V 1.30 A BEN-2024 +24 V 0.85 A
<50 mVss <50 mVss <50 mVss <50 mVss
78 % 82 % 83 % 85 %
8.00 A <100 mVss 3.33 A <100 mVss 2.66 A <100 mVss 1.66 A <100 mVss
82 % 84 % 84 % 84 %
BEN-6005 50 W +5 V 10.00 A <150 mVss BEN-6012 60 W +12 V 5.00 A <150 mVss 109 x 58.5 x 30 mm BEN-6015 60 W +15 V 4.00 A <150 mVss BEN-6024 60 W +24 V 2.50 A <150 mVss
82 % 86 % 86 % 86 %
BEND-0512 +12 V 0.42 A <50 mVss 96 x 54 x 33.6 mm 5W BEND-0524 +24 V 0.23 A <50 mVss
79 % 82 %
BEND-1012 +12 V 0.90 A <50 mVss 96 x 54 x 34.1 mm 10 W BEND-1024 +24 V 0.45 A <50 mVss
80 % 82 %
BEND-2012 +12 V 1.60 A <50 mVss 96 x 54 x 36.6 mm 20 W BEND-2024 +24 V 0.85 A <50 mVss
82 % 85 %
BEND-4012 +12 V 3.33 A <100 mVss 135 x 70 x 39 mm 40 W BEND-4024 +24 V 1.66 A <100 mVss
84 % 84 %
BEND-6012 +12 V 5.00 A <150 mVss 135 x 70 x 44 mm 60 W BEND-6024 +24 V 2.50 A <150 mVss
86 % 86 %
BEN-4005 +5 V BEN-4012 +12 V 89 x 63.5 x 25 mm 40 W BEN-4015 +15 V BEN-4024 +24 V
Chassis and DIN Rail mounting
Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel. +49 906 70595-0 |
[email protected] | www.bicker.de
Power modules
Ultra compact power modules for print, chassis and DIN Rail mounting Fully encapsulated modules in plastic case Wide temperature range -30…+70 °C Safety standard according to EN/UL 60950-1 EN55022 Class B High efficiency and reliability
Power supplies Te c h n i c a l d a t a
230 VAC 70 mA, typ 160 mA, typ 340 mA, typ 600 mA, typ 700 mA, typ
110 VAC 10 A, typ 10 A, typ 16 A, typ 30 A, typ 30 A, typ
230 VAC 20 A, typ 20 A, typ 30 A, typ 50 A, typ 50 A, typ
Inrush current BEN(D)-05 BEN(D)-10 BEN(D)-20 BEN(D)-40 BEN(D)-60
Hold up time >80 ms (typ / 230 V AC), >15 ms (typ / 115 V AC) Leakage current 0.3 mA (typ / 230 V AC / 50 Hz) Voltage accuracy ± 2% Load fluctuation ± 1% Minimum load BEN(D)-05/10/20/40: 0 %, BEN(D)-60: 1 % Trim ± 10 % Trim of output voltage for the following models possible: BEN(D)-20/40/60 Protection Short circuit protection: Switch off with auto recovery Overcurrent protection: 110…150 %, switch off with auto recovery Overvoltage protection: 5 V models: ≤7,5 V DC 12 V models: ≤20 V DC 15 V models: ≤20 V DC 24 V models: ≤30 V DC BEN(D)-60: Zener diode Back-up fuse must be used! For calculation/type, please refer to the application notes. Insulation voltage Input / Output BEN(D)-05/10/20/40: 3000 V AC / 1 Min, BEN(D)-60: 4000 V AC / 1 Min Input / FG 1500 V AC / 1 Min Output/FG 500 V AC / 1 Min Insulation resistance Input / Output and Input / FG 100 MΩ (min) Safety / EMC EN60950-1, UL60950-1, CE Protection class BEN(D)-05/10/20/60: Protection class I BEN(D)-40: Protection class II Temperature Operating: -30…+70 °C / Storage: -40…+85 °C Derating BEN(D)-05/10/20 –30…–10 °C: 2.0 % / °C, +55…+70 °C: 3.75 % / °C BEN(D)-4005/6005 +45…+70 °C: 3.0 % /°C BEN(D)-4012/4015 +55…+70 °C: 3.7 % / °C BEN(D)-4024/6024 +55…+70 °C: 2.7 % / °C BEN(D)-6012/6015 +50…+70 °C: 2.5 % / °C MTBF BEN(D)-05/10/20: >300 000 h according to MIL-HDBK-217F at +25 °C BEN(D)-40/60: >200 000 h according to MIL-HDBK-217F at +25 °C Max. operating altitude 2000 m Humidity Operating: 10…85 % RH, non-condensing / Storage: 10…90 % RH, non-condensing Switching frequency 65 kHz (typ), BEN-60: 100 kHz (typ) Dimensions (W x D x H) See drawing Weight (net) BEND-05/10/20: app. 0.2 kg, BEND-40/60: app. 0.4 kg BEN-05/10/20: app. 0.1 kg, BEN-40/60: app. 0.3 kg PSZ-1009 Ripple and Noise was measured with parallel cables (1 µF ceramic capacitor + 10 µF electrolytic capacitor). All data was measured at +25 °C, operating humidity <75 %, nominal input voltage. The final assembly has to comply with the valid EMC and safety standards. We recommend to use a cable as short as possible to connect module and load. As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition.
Male adapter
Optional accessory For detailed information please visit our website www.bicker.de and refer to the article number. Article No. Description PSZ-1009 Male adapter, DC plug on screw terminal Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel. +49 906 70595-0 |
[email protected] | www.bicker.de
Power modules
Input voltage 85…264 V AC, 120…370 V DC Input frequency 47…63 Hz Input current 110 VAC BEN(D)-05 120 mA, typ BEN(D)-10 260 mA, typ BEN(D)-20 600 mA, typ BEN(D)-40 1000 mA, typ BEN(D)-60 1400 mA, typ
Power supplies Drawing
Pin assignment 1: FG 5: No Pin 2: AC (N) 6: No Pin 3: AC (L) 7: No Pin 4: -Vo 8: Trim* (BEN-20 only)
H
C
BEN-05/10/20
7
Bottom
B
2
6
E
5 4 Trim
1
G
E
8
F F F F F
3
D
BEN-10XX 55.00 mm 45.00 mm 21.00 mm 47.00 mm 17.50 mm 5.00 mm 12.50 mm 6.5 mm
A
BEN-20XX 70.00 mm 48.00 mm 23.50 mm 62.00 mm 20.00 mm 5.75 mm 12.50 mm 6.5 mm
Power modules
Dimensions Nr. BEN-05XX A 48.50 mm B 36.00 mm C 20.50 mm D 40.50 mm E 12.50 mm F 4.00 mm G 10.00 mm H 6.5 mm
ø 1.00
Tolerance ±0.5 mm
Pin assignment 1: AC (L) 5: -Vo 2: AC (N) 6: No Pin 3: +Vo 7: Trim* 4: No Pin
BEN-40
2
7
5
55.88
Bottom
25.40
55.88
63.50
6
1
25.00
4 3 81.28
6.00
ø1.20
89.00
Tolerance ±0.5 mm
BEN-60
Pin assignment 1: AC (N) 4: +Vo 2: AC (L) 5: -Vo 3: FG 6: Trim*
109.00
96.32
30.70
15.60
10.16
1
6.00
5 4 5.08
46.30
19.05
58.50
2
Bottom
6 30.00
4-M3 with max. 4 mm thread length
3
8.90
97.30
Ø Pin 1, 2, 4, 5: 1,8 mm Ø Pin 3, 6: 1,2 mm Tolerance ±0.5 mm
* Trim: Please visit our website www.bicker.de and refer to the article „BEN/BEND“ to get the description of the „Trim resistance calculation“.
to the article numbe
Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel. +49 906 70595-0 |
[email protected] | www.bicker.de
Power supplies Drawing BEND-05/10/20
Pin assignment 1: FG 5: NC 2: AC (N) 6: NC/Trim* 3: AC (L) 7: NC 4: -Vo 8: +Vo
8
Terminal size 2.5 mm2
8.50
3
5 6 7
4.50
Oberseite
4 54.00
Top
2
4 5 6 7 8
46.00
1
34.50
1 2 3
Pin assignment 1: AC (L) 5: NC 2: AC (N) 6: -Vo 3: NC 7: NC 4: +Vo 8: Trim*
96.10 86.10
135.00 120.00
52.00
70.00
BEND-40
Toleranz ±0,5 mm
Terminal size 2.5 mm2
8
137.00
8.50 ±1 mm Toleranz 20.60
BEND-60
Pin assignment 1: AC (N) 5: NC 2: AC (L) 6: +Vo 3: FG 7: -Vo 4: NC 8: Trim*
135.00
Top
Terminal size 2.5 mm2 4.50
4 5 6 7 8
39.50
1 2 3
52.00
70.00
120.00
Toleranz ±1 mm
137.00
Derating
Rated load (%)
100%
-10°C
DIN Rail mounting plate removable for chassis mounting
55°C
80% 60% 43,75 %
40% 20% 0% -30 -10
0
10
20
30
40
50
60
70
Operating temperature (°C)
BEN(D)-40
BEN(D)-60 45°C 55°C
100%
60 %
40%
45 %
5V
12 V, 15 V 24 V
0% -30 -20 -10
0
25 %
10
20
Operating temperature (°C)
30
40
50
60
70
Rated load (%)
60%
20%
45°C 50°C
100%
80% Rated load (%)
Specification is subject to change without notice. Errors excepted. Status as at: 14.01.2016
BEN(D)-05/10/20
55°C
75% 50% 25% 0% -30
5V
60 % 50 %
24 V
25 %
12 V, 15 V
0
20
30
40
50
55
60
70
Operating temperature (°C)
Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel. +49 906 70595-0 |
[email protected] | www.bicker.de
Power modules
20.60
max. 36.60
7
max. 31.00
6
54.00
5
Top
46.00
2 3
max. 31.00
4
1
max. 36.60
96.10 86.10
