Preview only show first 10 pages with watermark. For full document please download

Berkel 935, 936 And 937 Full Automatic Slicer Range Spare Parts

   EMBED

Share

Transcript

ILLUSTRATED PARTS MANUAL 935 / 936 / 937 FULLY AUTOMATIC STACKING & SHINGLING SLICERS Issue 3 / April 2009 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS CONTENTS Table of Contents: Page 1 INTRODUCTION 3 2 SAFETY 4 3 ELECTRICAL DIAGRAMS 6 4 TECHNICAL INFORMATION 9 5 APPENDICES 14 2/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 1.0 INTRODUCTION The Berkel 935, 936 and 937 slicers are stainless steel robust slicers designed for continuous use. These slicers are IP33. The 935 slicer is easy to use with simple stacking and shingling operations. The 936 slicer is a computer controlled model, with 99 PLU’s. It is capable of multi stacking, multi shingling (both cross ways and length wise), and is able to shingle in a circular format. The photo is on the front cover of this book. The 937 slicer is similar to the 936 but with an integrated conveyor. 3/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 2.0 SAFETY CAUTION! ALWAYS READ AND FULLY UNDERSTAND THE USER INSTRUCTIONS BEFORE OPERATING THIS EQUIPMENT 2.1 Safety devices The machine will not self start after a voltage drop Fixed metal ring around the blade which is non removable The thickness plate is locked when the carriage is tilted. Emergency switch, main switch ‘OFF’ button (See below) 935 slicer: 936 & 937 slicers (The main OFF and ON switch is found at the top left corner of the head up display.) Emergency OFF Main switch ON 4/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 2.2 Products that can’t be sliced Non food items Food with bones Deep frozen food products Note: To slice quantities of cheese the Teflon coated option is recommended 5/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 3.0 ELECTRICAL DIAGRAMS 3.1 BUS BOARD 935 6/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 3.2 BUS BOARD 936 / 937 7/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 3.3 935 / 936 / 937 8/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 4.0 TECHNICAL INFORMATION Table of Contents: Page 4.1 TECHNICAL DATA 10 4.2 MAINTENANCE 13 9/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 4.1 TECHNICAL DATA 4.1.1 935 SLICER 4.1.2 936 SLICER 10/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 4.1.3 937 SLICER 11/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS MODEL / FEATURE Knife size mm Capacity: Rectangular Round Max product feed Without resetting Slice thickness Table speed / min Max stack height Shingle: single row Shingle: Multi rows Shingle: Circle Double stack Power rating kW Footprint: mm A: Front to back F: Side to side Dimensions: H: Standard Width Width (ext table) B: Depth D: Height Integral sharpener Metal knife remover Program memory 935 936 937 Conveyor 330 330 330 255x195h 190 255x195h 190 255x195h 190 215mm or 420 ext 0 - 10 0 – 50 50mm YES NO NO YES 0.6 215mm / 420 ext 0 – 10 0 – 50 80mm YES YES YES YES 0.6 215mm or 420 ext 0 – 10 0 – 50 30mm YES YES YES YES 0.6 574 502 574 502 574 502 980 1140 840 550 980 1140 840 700 980 1140 1360 700 YES YES NO YES YES 99 YES YES 99 12/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 4.2 MAINTENANCE SERVICE CHECKLIST Refer to Technical Bulletin: 10315 latest issue. Machine : Auto Slicers Make : Berkel 1 Base Assembly : check and correct adjustments of safety switches, carriage stop springs on slide bar and condition of mains lead and plug. 2 Check condition all drive belts and adjust as necessary. Also check carriage chain drive tension. 3 Lubricate sliding rails 4 Check adjustments of slice deflector. 5 Thickness regulation : check accuracy of movement of EPH compared to thickness of slice i.e. 2mm thickness = 2mm pusher plate movement. 6 Power stroke : check condition of drive belts/ tension, lubricate bearings. 7 Receiving tray and solenoid housing : check movement of stacker hand and stacker hand fingers to chain frame. Check return of stacker hand (not bouncing) and adjust as necessary. 8 Meat table : check condition and movement of meat clamp and product guide bar, check the stroke of the meat table, check condition and tension of brass half nut for excessive play in carriage. 9 Chain frame: check condition of chains, bearings, tension springs. 10 Sharpener : check the condition of the stones, replace as necessary, lubricate assembly and check adjustment of the de-burring stone and operation of the sharpener , adjust if necessary. 11 Last slice devices : check condition and function of assembly. 12 Visually check electrical safety of machine. 13 Ensure machine functions correctly after complete service. 14 Check the gap between the blade edge and the blade guard ring is not greater than 6mm 15 Check the gap between the gauge plate and the blade edge is 1 to 1 1/2mm, if greater make adjustments 16 Ensure knife is safely behind the thickness plate at index setting of zero 17 Ensure all mechanical and electrical safety interlocks are working correctly If you find any hazardous problems with the machine i.e. interlock not functioning then inform the customer that the machine is not safe to be used and note the issue on your TJR. 13/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.0 APPENDICES Table of Contents: Page 5.1 OPTIONS 15 5.2 RECOMMENDED PARTS 15 5.3 EXPLODED VIEWS WITH PARTS LISTINGS 16 14/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.1 OPTIONS Teflon coating on knife, gauge plate, centre plate and meat table top Last slice device; aluminium back plate with long stainless steel spikes Last slice device; all stainless steel claw clamping device (bacon requirement) Factory fitted: long meat table (530mm). 5.2 TECHNICIANS RECOMMENDED PARTS PART NUMBER 3330-55XW BS936-111 BS936-S-06 BS936-312 DESCRIPTION Knife 330mm 100CR6 √ Knife screws (B9A-111) Sharpening stone √ Knife remover √ 15/97 QTY 1 4 2 1 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3 EXPLODED VIEWS AND PART NUMBERS Page 5.3.1 5.3.2 5.3.3 5.3.4 5.3.5 5.3.6 5.3.7 5.3.8 5.3.9 5.3.10 5.3.11 5.3.12 5.3.13 5.3.14 5.3.15 5.3.16 5.3.17 5.3.18 5.3.19 5.3.20 5.3.21 5.3.22 5.3.23 5.3.24 5.3.25 5.3.26 5.3.27 5.3.28 5.3.29 5.3.30 5.3.31 5.3.32 5.3.33 5.3.34 5.3.35 5.3.36 5.3.37 5.3.38 5.3.39 5.3.40 5.3.41 935/936/937 Machine assembly (Drawing 1) 935/936/937 Machine assembly (Drawing 2) 936/937 Head up display support tube (Drawing 3) 935/936/937 Base assembly for the stacking device (Drawing 4) 935/936/937 Magnetic solenoid (Drawing 5) 935/936/937 Light barrier for the stacking device (Drawing 6) 935/936/937 Top pin complete for chain assembly (Drawing 7) 935/936/937 Buffer 1 (Drawing 8) 935/936/937 Buffer 2 (Drawing 9) 935/936/937 Pin bearing (Drawing 10) 935/936/937 Micro switch complete with metal plate(Drawing 11) 935/936/937 Deflection roller (Drawing 12) 935/936/937 Step motor for receiving plate (Drawing 13) 935/936/937 Guiding mechanism for receiving tray (Drawing 14) 935/936/937 Stacking hand with bracket (Drawing 15) 935/936/937 Carriage assembly (Drawing 16) 935/936/937 Carrier for carriage drive 935/936/937 Driving unit complete with step motor for chain assy (Drawing 18) 935/936/937 Synchronizing plate with free wheel 16 (Drawing 19) 935/936/937 Synchronizing plate with free wheel 15 (drawing 20) 935/936/937 Cover for the chain drive bearing (Drawing 21) 935/936/937 Step motor for chains (Drawing 22) 935/936/937 Chain frame assembly (Drawing 23) 935/936/937 Chain frame deflection roller (Drawing 24) 935/936/937 Chain frame pressure roller (Drawing 25) 935/936/937 Chain frame holding bracket (Drawing 26) 935/936/937 Index mechanism assembly (Drawing 27) 935/936/937 Index adjusting block (Drawing 28) 935/936/937 Index guide strap complete (Drawing 29) 935/936/937 Support for gauge plate (Drawing 30) 935/936/937 Thickness potentiometer assembly (Drawing 31) 935/936/937 DC motor and carriage chain drive tensioner (Drawing 32) 935/936/937 Chain wheel carrier (Drawing 33) 935/936/937 Cover plate assembly for chain drive (Drawing 34) 935/936/937 Foot complete (Drawing 35) 935/936/937 Foot (Large) complete (Drawing 36) 935/936/937 Foot (Small) complete (Drawing 37) 935/936/937 Adjuster complete (Drawing 38) 935/936/937 Deflection roller for the base plate (Drawing 39) 935/936/937 Meat table and support assembly (Drawing 40) 935/936/937 Product fence assembly (Standard) (Drawing 41) 16/97 18 21 22 23 25 26 27 28 28 29 29 30 31 32 34 35 37 38 40 40 41 41 42 44 45 47 49 51 52 53 54 55 56 57 58 59 60 61 62 63 65 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.42 5.3.43 5.3.44 5.3.45 5.3.46 5.3.47 5.3.48 5.3.49 5.3.50 5.3.51 5.3.52 5.3.53 5.3.54 5.3.55 935/936/937 Product fence for cheese (Short) (Drawing 42) 935/936/937 Product fence for table 530mm (Drawing 43) 935/936/937 Product fence for table 530mm cheese (Drawing 44) 935/936/937 Driving unit for End piece holder (Drawing 45) 935/936/937 Bottom feed plate for table (Drawing 46) 935/936/937 Bottom feed plate with spikes for cheese (Drawing 46b) 935/936/937 End piece holder (Drawing 47) 935/936/937 Claw gripper type end piece holder assembly (Drawing 48) 935/936/937 Claw gripper (Drawing 49) 935/936/937 Carriage support arm complete (Drawing 50) 935/936/937 Blade protection and slice deflector complete (Drawing 51) 935/936/937 Slice deflector (Drawing 52) 935/936/937 Blade drive motor (Drawing 53) 935/936/937 Knife shaft hub bearing assembly (Drawing 54) 66 66 67 68 71 72 73 75 77 79 80 82 83 85 EXPLODED VIEWS AND PART NUMBERS 937 5.3.56 5.3.57 5.3.58 5.3.59 5.3.60 5.3.61 5.3.62 937 Conveyor belt complete (drawing 55) 937 Roller complete (drawing 56) 937 Deflection roller complete (drawing 57) 937 Small roller complete (drawing 58) 937 End switch complete (drawing 59) 937 Strap complete (drawing 60) 937 Driving unit for conveyor belt complete (drawing 61) 87 89 90 91 92 93 94 5.3.63 935/936/937 ADDITIONAL KEY PARTS 96 17/97 5.3.1 935 / 936 / 937 Machine assembly (Drawing 1) ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.1 935 / 936 / 937 Machine assembly (Drawing 1) REF PART NO DESCRIPTION 1 2 2 3 4 5 6 B9B-01 B95-01 B9A-1 B9B-2 B95-2 B9A-3 B9A-4 B9A-5 B9A-6 7 8 9 10 11 12 B9A-7 B9A-8 B9A-9 B9A-10 B9A-11 B9A-12 Machine body – base plate (Drawing 1) Machine body – base plate (Drawing 1) Base Plate Machine body complete (Drawing 2) Machine body complete (Drawing 2) Holding tube complete assy (Drawing 3) Base compl. For stacking device (Drawing 4) Sliding support complete (Drawing 16) Driving unit complete with step motor for chain assembly (Drawing 18) Support complete assy (Drawing 27) Chain tensioner complete with motor (Drawing 32) Chain wheel carrier compl. (Drawing 33) Cover plate complete (Drawing 34) Foot complete (Drawing 35) Foot (large) complete (Drawing 36) 13 14 15 B9A-13 B9A-14 B9A-15 16 17 18 19 20 21 B9A-16 B9A-17 B9A-18 B9A-19 B9A-20 B9A-21 B9A-21a B9A-22 B9A-23 B9A-24 B9A-25 B9A-26 B9A-27 B9A-28 B9A-29 B9A-30 B9A-31 B9A-32 B9A-33 B9A-34 B9A-35 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Foot (small) complete (Drawing 37) Adjuster complete (Drawing 38) Deflection roller for base plate complete (Drawing 39) Cover for table Cover plate – backside Distance piece for guide bar for carriage Guide bar for carriage (short) Support for guide bar Conical pressure spring Double conical pressure spring Guide bar for carriage Bottom plate Washer Toothed washer Lens head screw Washer Toothed washer Cylindrical screw Washer Spring washer Cylindrical screw Countersunk screw Threaded pin Hexagon nut 19/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.1 935 / 936 / 937 Machine assembly (Drawing 1) REF 36 34 35 36 37 38 39 40 PART NO B9A-36 B9A-34 B9A-35 B9A-36 B9A-37 B9A-38 B9A-39 B9A-40 DESCRIPTION Spring washer Threaded pin Hexagon nut Spring washer Spring washer Cylindrical screw Cylindrical screw Cylindrical screw 20/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.2 935 / 936 / 937 Machine assembly (Drawing 2) 5.3.2 935 / 936 / 937 Machine assembly (Drawing 2) REF PART NO DESCRIPTION 2.1 2.2 2.2 2.3 B9B-2 B95-2 B9B-2/1 B95-2/1 B9A-2/2 B9A-2/3 Machine body complete (Drawing 2) Machine body complete (Drawing 2) Machine body 936, 937 Machine body 935 Cover plate for stacking device Countersunk screw 21/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.3 936 / 937 Head Up Display support tube (Drawing 3) REF PART NO DESCRIPTION 3.1 3.2 3.3 NS B9B-3 B9B-3/1 B9B-3/2 B9B-3/3 B9B-400 Holding tube complete (drawing 3) Holding tube with plate for keyboard Cylindrical screw Wing screw M6 Transparent cover for programming 22/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.4 935 / 936 / 937 Base assembly for the stacking device (Drawing 4) 23/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.4 935 / 936 /937 Base assembly for the stacking device (Drawing 4) REF 4.1 4.2 4.3. 4.4 4.5 4.6 PART NO B9A-4 B9A-4/1 B9A-4/2 B9A-4/3 B9A-4/4 B9A-4/5 BS936-4-6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 4.15 4.16 4.17 4.18 4.19 4.20 4.21 4.22 4.23 4.24 B9A-4/7 B9A-4/8 B9A-4/9 B9A-4/10 B9A-4/11 B9A-4/12 B9A-4/13 B9A-4/14 B9A-4/15 B9A-4/16 B9A-4/17 B9A-4/18 B9A-4/19 B9A-4/20 B9A-4/21 B9A-4/22 B9A-4/23 B9A-4/24 4.25 4.26 4.27 4.28 4.29 4.30 4.31 4.32 B9A-4/25 B9A-4/26 B9A-4/27 B9A-4/28 B9A-4/29 B9A-4/30 B9A-4/31 B9A-4/32 4.33 4.34 4.35 B9A-4/33 B9A-4/34 B9A-4/35 4.36 B9A-4/36 DESCRIPTION Base compl. For stacking device (drawing 4) Base for stacking device Magnetic solenoid complete (Drawing 5) Chain joint Toothed washer Hexagon screw Light barrier for stacking device compl (Drawing 6) (B9A-4.6) Stop complete for chain assembly (Drawing 7) Buffer 1 compl. (Drawing 8) Buffer 2 compl. (Drawing 9) Holder for buffer Washer Cylindrical screw Countersunk screw Pin bearing complete (Drawing 10) Retaining ring Deep groove ball bearing Bearing compl. For support stacking device Washer Hexagon nut Rotary shaft Mounting stud for transformer Transformer Hexagon nut Micro switch complete with metal plate (Drawing 11) Hexagon screw Cylindrical screw Bearing for step motor Deflection roller (Drawing 12) Washer Toothed washer Hexagon nut Step motor for receiving plate complete (Drawing 13) Cylindrical screw Dry plain bearing Guiding mechanism for receiving tray complete (Drawing 14) Grooved taper pin 24/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.4 935 /936 / 937 Base assembly for the stacking device (Drawing 4) 4.37 4.38 4.39 4.40 B9A-4/37 B9A-4/38 B9A-4/39 B9A-4/40 4.41 B9A-4/41 Washer Toothed washer Hexagon screw Stacking device complete with bracket (Drawing 15) Meat tray complete 5.3.5 935 / 936 / 937 Magnetic solenoid (Drawing 5) REF PART NO DESCRIPTION 4.2.1 4.2.2 4.2.3 4.2.4 4.2.5 B9A-4.2 BS936-4-2-1 B9A-4/2/2 B9A-4/2/3 B9A-4/2/4 B9A-4/2/5 Magnetic solenoid complete (drawing 5) Magnetic solenoid (BS93A-4.2) Adaptor for magnetic solenoid Hexagon nut Hexagon nut Roll of chain 25/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.6 935 / 936 / 937 Light barrier for stacking device (Drawing 6) REF 4.6.1 4.6.2 4.6.3 4.6.4 4.6.5 4.6.6 4.6.7 4.6.8 PART NO DESCRIPTION B9A-4/6 Light barrier for stacking device complete (drawing 6) Holding part for light barrier stacking device Distance bushing Light barrier for stacking device Cylindrical screw Hexagon nut Cylindrical screw Toothed washer Washer B9A-4/6/1 B9A-4/6/2 B9A-4/6/3 B9A-4/6/4 B9A-4/6/5 B9A-4/6/6 B9A-4/6/7 B9A-4/6/8 26/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.7 935 / 936 / 937 Stop pin complete for chain assembly (Drawing 7) REF PART NO DESCRIPTION 4.7.1 4.7.2 4.7.3 4.7.4 4.7.5 B9A-4/7 B9A-4/7/1 B9A-4/7/2 B9A-4/7/3 B9A-4/7/4 B9A-4/7/5 Stop complete for chain assembly (drawing 7) Stop for chain assembly Adjusting ring Threaded pin Hexagon nut Washer 27/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.8 935 / 936 / 937 Buffer 1 (Drawing 8) REF PART NO DESCRIPTION 4.8.1 4.8.2 4.8.3 B9A-4/8 B9A-4/8/1 B9A-4/8/2 B9A-4/8/3 Buffer 1 complete (drawing 8) Buffer-1 Buffer plate complete Hexagon nut 5.3.9 935 / 936 / 937 Buffer 2 (Drawing 9) REF PART NO DESCRIPTION 4.9.1 4.8.2 4.9.2 B9A-4/9 B9A-4/9/1 B9A-4/8/2 B9A-4/9/2 Buffer 2 complete (drawing 9) Buffer-2 Buffer plate complete Hexagon nut 28/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.10 935 / 936 / 937 Pin bearing (Drawing 10) REF PART NO DESCRIPTION 4.14.1 4.14.2 4.14.3 4.14.4 B9A-4/14 B9A-4/14/1 B9A-4/14/2 B9A-4/14/3 B9A-4/14/4 Pin bearing complete (drawing 10) Bolt for pin bearing Flange for pin bearing Hexagon nut for pin bearing Washer for pin bearing 5.3.11 REF 4.24.1 4.24.2 4.24.3 4.24.4 4.24.5 935 / 936 / 937 Micro switch complete with metal plate (Drawing 11) PART NO DESCRIPTION B9A-4/24 Micro switch complete with metal plate (drawing 11) Metal plate for micro switch Micro switch (B9A-4.24.2) Cylindrical screw Toothed washer Hexagon nut B9A-4/24/1 BS936-4-24-2 B9A-4/24/3 B9A-4/24/4 B9A-4/24/5 29/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.12 935 / 936 / 937 Deflection roller (Drawing 12) REF PART NO DESCRIPTION 4.28.1 4.28.2 4.28.3 4.28.4 4.28.5 4.28.6 B9A-4/28 B9A-4/28/1 B9A-4/28/2 B9A-4/28/3 B9A-4/28/4 B9A-4/28/5 B9A-4/28/6 Deflection roller (drawing 12) Hexagon screw Spring washer Washer Washer Adjusting washer Needle bearing 30/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.13 REF 4.32.1 4.32.2 4.32.3 935 / 936 / 937 Step motor for receiving plate (Drawing 13) PART NO DESCRIPTION BS936-4-32 Step motor for receiving plate complete (drawing 13) (B9A-4.32) Step motor for receiving plate (B9A-4.32.1) Synchronize plate Threaded pin BS936-4-32-1 B9A-4/32/2 B9A-4/32/3 31/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.14 935 / 936 / 937 Guiding mechanism for receiving tray (Drawing 14) 32/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.14 REF 4.35.1 4.35.2 4.35.3 4.35.4 4.35.5 4.35.6 4.35.7 4.35.8 4.35.9 4.35.10 4.35.11 4.35.12 4.35.13 4.35.14 935 / 936 / 937 Guiding mechanism for receiving tray (Drawing 14) PART NO DESCRIPTION B9A-4.35 Guiding mechanism for receiving tray complete (drawing 14) Guiding mechanism for receiving tray Guide table feed Fixing part for receiving tray (B9A-4.35.3) Pin for receiving tray (B9A-4.35.4) Metal plate for micro switch Synthetic guide for tray Rubber ring Toothed belt XL, 370mm, for receiving tray B9A-4.35.8 Countersunk screw Threaded pin Hexagon nut Washer Toothed washer Hexagon screw B9A-4/35/1 B9A-4/35/2 BS936-4-35-3 BS936-4-35-4 B9A-4/35/5 B9A-4/35/6 B9A-4/35/7 BS936-4-35-8 B9A-4/35/9 B9A-4/35/10 B9A-4/35/11 B9A-4/35/12 B9A-4/35/13 B9A-4/35/14 33/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.15 REF 4.40.1 4.40.2 4.40.3 4.40.4 935 / 936 / 937 Stacking hand with bracket (Drawing 15) PART NO DESCRIPTION B9A-4/40 Stacking device complete with bracket (drawing 15) Stacking device (B9A-4.40.1) Bracket stacking device Nylon stopple for stacking device Hexagon nut BS936-4-40-1 B9A-4/40/2 B9A-4/40/3 B9A-4/40/4 34/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.16 935 / 936 / 937 Carriage assembly (Drawing 16) 35/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.16 935 / 936 / 937 Carriage assembly (Drawing 16) REF 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 PART NO B9A-5 B9A-5/1 B9A-5/2 B9A-5/3 B9A5/4 B9A-5/5 B9A-5/6 B9A-5/7 5.8 5.9 5.10 5.11 5.12 5.13 5.14 5.15 5.16 5.17 5.18 5.19 5.20 5.21 5.22 5.23 5.24 5.25 5.26 5.27 5.28 5.29 5.30 5.31 5.32 5.33 5.34 5.35 5.36 5.37 B9A-5/8 BS936-5-9 B9A-5/10 B9A-5/11 B9A-5/12 B9A-5/13 B9A-5/14 B9A-5/15 B9A-5/16 B9A-5/17 B9A-5/18 B9A-5/19 B9A-5/20 B9A-5/21 B9A-5/22 B9A-5/23 B9A-5/24 B9A-5/25 B9A-5/26 B9A-5/27 B9A-5/28 B9A-5/29 B9A-5/30 B9A-5/31 B9A-5/32 B9A-5/33 B9A-5/34 B9A-5/35 B9A-5/36 B9A-5/37 DESCRIPTION Sliding support complete (drawing 16) Sliding support Locking piece Knob Lever for catching bolt Contact metal sheet for light barrier Tensioning strap Carrier of Carriage drive complete (drawing 17) Spring holder Torsion spring (B9A-5.9) Connecting bolt Strap Tube, short Tube, long Curved tube Bolt for carriage drive Retaining ring Deep groove ball bearing Threaded pin Eccentric Deep groove ball bearing Threaded pin DU-bushing Washer Levelling washer for ball bearing Hexagon nut Hexagon screw Threaded pin Threaded pin Washer Toothed washer Hexagon nut Cap Threaded pin Hexagon nut Mounting clip Washer DU-bushing 36/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.16 5.38 5.39 5.40 5.41 5.42 5.43 21 5.3.17 REF 5.7.1 5.7.2 5.7.3 5.7.4 5.7.5 5.7.6 935 / 936 / 937 Carriage assembly (Drawing 16) B9A-5/38 B9A-5/39 BS936-5-40 B9A-5/41 B9A-5/42 B9A-5/43 BS936-21 Slide bearing Threaded pin Light barrier for carriage (B9A-5.40) Toothed belt XL 1,30 m Adjusting washer Retaining ring Conical pressure spring (B9A-21) 935 / 936 / 937 Carrier for carriage drive (Drawing 17) PART NO DESCRIPTION B9A-5/7 Carrier of Carriage drive complete (drawing 17) Carrier of carriage drive Plate for carrier of carriage drive Threaded pin Hexagon nut Spring washer Hexagon screw B9A-5/7/1 B9A-5/7/2 B9A-5/7/3 B9A-5/7/4 B9A-5/7/5 B9A-5/7/6 37/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.18 935 / 936 / 937 Driving unit complete with step motor for chain assembly (Drawing 18) 38/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.18 REF 935 / 936 / 937 Driving unit complete with step motor for chain assembly (Drawing 18) PART NO DESCRIPTION B9A-6 Driving unit complete with step motor for chain assembly (drawing 18) Plate Synchronizing plate with free wheel 16 (drawing 19) Synchronizing plate with free wheel 15 (drawing 20) Cover complete assy. (Drawing 21) Step motor for chain assemble (Drawing 22) Cylindrical screw Washer Toothed washer Hexagon nut Toothed belt 100 XL (B9A-6.10) √ Threaded pin Distance bushing Washer Toothed washer Hexagon nut Cable protection Retaining ring Adjusting washer Deep groove ball bearing Countersunk screw Driving axle for chain assembly Chain assemble complete (Drawing 23) (B9A6.22) 6.1 6.2 B9A-6/1 B9A-6/2 6.3 B9A-6/3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 6.12 6.13 6.14 6.15 6.16 6.17 6.18 6.19 6.20 6.21 6.22 B9A-6/4 B9A-6/5 B9A-6/6 B9A-6/7 B9A-6/8 B9A-6/9 BS936-6-10 B9A-6/11 B9A-6/12 B9A-6/13 B9A-6/14 B9A-6/15 B9A-6/16 B9A-6/17 B9A-6/18 B9A-6/19 B9A-6/20 B9A-6/21 BS937-6-22 39/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.19 935 / 936 / 937 Synchronizing plate with free wheel 16 (Drawing 19) REF 6.2.1 6.2.2 5.3.20 PART NO DESCRIPTION B9A-6/2 Synchronizing p[late with free wheel 16 (drawing 19) Synchronize plate Free wheel B9A-6/2/1 B9A-6/2/2 935 / 936 / 937 Synchronizing plate with free wheel 15 (Drawing 20) REF 6.3.1 6.2.2 PART NO DESCRIPTION B9A-6/3 Synchronizing plate with free wheel 15 (drawing 20) Synchronize plate Free wheel B9A-6/3/1 B9A-6/2/2 40/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.21 935 / 936 / 937 Cover for chain drive bearing (Drawing 21) REF PART NO DESCRIPTION 6.4.1 6.4.2 6.19 B9A-6-4 B9A-6/4/1 B9A-6/4/2 B9A-6/19 Cover complete (drawing 21) Gasket Rotary shaft Deep groove ball bearing 6.19 441-9969 RS equivalent (Deep groove ball bearing) 5.3.22 935 / 936 / 937 Step motor for chains (Drawing 22) REF 6.5.1 6.5.2 4.32.1 PART NO DESCRIPTION BS936-6-5 Step motor for chain assembly (drawing 22) (B9A-6.5) Synchronize plate Threaded pin Step motor B9A-6/5/1 B9A-6/5/2 B9A-4/32/1 41/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.23 935 / 936 / 937 Chain frame assembly (Drawing 23) 42/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.23 REF 935 / 936 / 937 Chain frame assembly (Drawing 23) PART NO DESCRIPTION BS937-6-22 Chain assembly complete (drawing 23) (B9A-6.22) Fixing part of deflection rollers Cover Deflection roller complete (drawing 24) (B9A-6.22.3) Chain press complete (drawing 25) (B9A6.22.4) Chain drive complete Holding part for chain press complete assy ( Drawing 26) Coupling, lower part, complete Coupling, upper part Distance shaft Lower part for chain assembly Upper part for chain assembly Friction ring Guiding roll Chain with spikes (B9A-6.22.14A) Chain for Teflon execution of machine Chain for Teflon execution of machine Pressure spring, stainless long (B9A-6.22.15) Pressure spring, stainless short Deep groove ball bearing (B9A-6.22.16) Countersunk screw Threaded pin Countersunk screw Countersunk screw Countersunk screw Countersunk screw st st M6 x 15 Grooved taper pin Handle for chain assembly (B9A-6.22.24) Stopple for handle Washer M6 st st (B9A-6.22.26) Hexagon full nut st st (B9A-6.22.27) 6.22.1 6.22.2 6.22.3 B9A-6/22/1 B9A-6/22/2 BS936-6-22-3 6.22.4 BS936-6-22-4 6.22.5 6.22.6 B9A-6/22/5 B9A-6/22/6 6.22.7 6.22.8 6.22.9 6.22.10 6.22.11 6.22.12 6.22.13 6.22.14a 6.22.14b 6.22.14c 6.22.15 6.22.15A 6.22.16 6.22.17 6.22.18 6.22.19 6.22.20 6.22.21 6.22.22 6.22.23 6.22.24 6.22.25 6.22.26 6.22.27 B9A-6/22/7 B9A-6/22/8 B9A-6/22/9 B9A-6/22/10 B9A-6/22/11 B9A-6/22/12 B9A-6/22/13 BS936-6-22-14A B9A-6/22/14B B9A-6/22/14C B9A-6/22/15 B9A-6/22/15A BS936-6-22-16 B9A-6/22/17 B9A-6/22/18 B9A-6/22/19 B9A-6/22/20 B9A-6/22/21 B9A-6/22/22 B9A-6/22/23 AWT97-000032 B9A-6/22/25 15711-506 13821-606 43/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.24 935 / 936 / 937 Chain frame deflection roller (Drawing 24) REF PART NO DESCRIPTION B9A-6/22/3 Deflection roller complete (drawing 24) Support for deflection roller Deflection roller Pin for deflection roller 6.22.3.1 B9A-6/22/3/1 6.22.3.2 B9A-6/22/3/2 6.22.3.3 B9A-6/22/3/3 44/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.25 935 / 936 / 937 Chain frame pressure roller (Drawing 25) 45/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.25 935 / 936 / 937 Chain frame pressure roller (Drawing 25) REF 6.22.4.1 6.22.4.2 6.22.4.3 6.22.4.4 6.22.4.5 6.22.16 PART NO DESCRIPTION BS936-6-22-4 Chain press complete (drawing 25) (B9A-6.22.4) Chain press roller Shaft for chain press Rubber ring Fixing part for chain press Threaded pin Deep groove ball bearing B9A-6/22/4/1 B9A-6/22/4/2 B9A-6/22/4/3 B9A-6/22/4/4 B9A-6/22/4/5 B9A-6/22/16 46/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.26 935 / 936 / 937 Chain frame holding bracket (Drawing 26) 47/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.26 935 / 936 / 937 Chain frame holding bracket (Drawing 26) REF 6.22.6.1 6.22.6.2 6.22.6.3 6.22.6.4 6.22.6.5 6.22.6.6 6.22.6.7 6.22.6.8 6.22.6.9 6.22.6.10 6.22.6.11 6.22.6.12 6.22.6.13 6.22.6.14 6.22.6.15 6.22.6.16 6.22.6.17 6.22.6.18 6.22.6.19 6.22.6.20 6.22.6.21 6.22.6.22 6.22.6.23 PART NO DESCRIPTION B9A-6/22/6 Holding part for chain press complete (drawing 26) Holding part for chain press Guiding bolt for holding part Spacer for torsion spring Hexagon nut Deflector comb Washer Washer for chain assembly Washer Washer Hexagon screw Plastic screw M6 Threaded pin Hexagon nut Washer Torsion spring Threaded pin Hexagon nut Cylindrical screw Hexagon nut Hexagon screw Hexagon nut Washer Countersunk screw B9A-6/22/6/1 B9A-6/22/6/2 B9A-6/22/6/3 B9A-6/22/6/4 B9A-6/22/6/5 B9A-6/22/6/6 B9A-6/22/6/7 B9A-6/22/6/8 B9A-6/22/6/9 B9A-6/22/6/10 B9A-6/22/6/11 B9A-6/22/6/12 B9A-6/22/6/13 B9A-6/22/6/14 B9A-6/22/6/15 B9A-6/22/6/16 B9A-6/22/6/17 B9A-6/22/6/18 B9A-6/22/6/19 B9A-6/22/6/20 B9A-6/22/6/21 B9A-6/22/6/22 B9A-6/22/6/23 48/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.27 935 / 936 / 937 Index mechanism assembly (Drawing 27) 49/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.27 935 / 936 / 937 Index mechanism assembly (Drawing 27) REF PART NO DESCRIPTION 7.1 7.2 7.3 B9A-7 B9A-7/1 B9A-7/2 B9A-7/3 7.4 7.5 7.6 7.7 7.8 7.9 7.10 7.11 7.12 7.13 7.14 7.15 7.16 7.17 7.18 7.19 7.20 7.21 7.22 7.23 7.24 B9A-7/4 BS936-7-5 B9A-7/6 B9A-7/7 B9A-7/8 B9A-7/9 B9A-7/10 B9A-7/11 B9A-7/12 B9A-7/13 B9A-7/14 B9A-7/15 B9A-7/16 B9A-7/17 B9A-7/18 B9A-7/19 B9A-7/20 B9A-7/21 B9A-7/22 B9A-7/23 B9A-7/24 Support complete (Drawing 27) Adjusting part complete (Drawing 28) Guide strap complete (Drawing 29) Support for thickness plate complete (Drawing 30) Potentiometer Indexing knob (B9A-7.5) Slide washer for thickness knob Washer for thickness knob Bolt for spiral wheel Spiral wheel Bearing for spiral wheel Adjusting part 1 Adjusting part 2 Spring for spiral wheel Threaded pin Threaded pin DU- bushing DU- bushing DU-bushing Threaded pin Threaded pin Hexagon nut Grooved taper pin Cylindric screw Cylindric screw 50/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.28 935 / 936 / 937 Index adjusting block (Drawing 28) REF PART NO DESCRIPTION 7.1.1 7.1.2 7.1.3 7.1.4 7.1.5 7.1.6 7.1.7 B9A-7/1 B9A-7/1/1 B9A-7/1/2 B9A-7/1/3 B9A-7/1/4 B9A-7/1/5 B9A-7/1/6 B9A-7/1/7 Adjusting part complete (drawing 28) Adjusting part Pin for spiral wheel Threaded pin Cylindrical screw Hexagon nut Threaded pin Threaded pin 51/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.29 935 / 936 / 937 Index guide strap complete (Drawing 29) REF PART NO DESCRIPTION 7.2.1 7.2.2 7.2.3 7.2.4 7.2.5 7.2.6 7.2.7 B9A-7/2 B9A-7/2/1 B9A-7/2/2 B9A-7/2/3 B9A-7/2/4 B9A-7/2/5 B9A-7/2/6 B9A-7/2/7 Guide strap complete (drawing 29) Guide strap Distance piece for strap Spring Spring washer Hexagon screw Grooved taper pin Washer 52/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.30 935 / 936 / 937 Support for gauge (thickness) plate (Drawing 30) REF 7.3.1 7.3.2 7.3.2 7.3.3 7.3.4 PART NO DESCRIPTION B9A-7/3 Support for thickness plate complete (drawing 30) Support complete Thickness plate complete Thickness plate complete, Teflon Washer Hexagon screw B9A-7/3/1 B9A-7/3/2 B9A-7/3/2T B9A-7/3/3 B9A-7/3/4 53/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.31 935 / 936 / 937 Thickness potentiometer assembly (Drawing 31) REF 7.4.1 7.4.2 7.4.3 7.4.4 7.4.5 PART NO DESCRIPTION BS936-7-4 Potentiometer complete with cable 1,70 m (drawing 31) (B9A-7.4) Metal plate for potentiometer Potentiometer Hexagon meter Draw spring (B9A-7.4.4) Cylindrical screw B9A-7/4/1 B9A-7/4/2 B9A-7/4/3 BS936-7-4-4 B9A-7/4/5 54/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.32 REF 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.10 8.11 8.12 8.13 8.14 6.19 935 / 936 / 937 DC motor and carriage chain drive tensioner (Drawing 32) PART NO DESCRIPTION B9A-8 Chain tensioner complete with motor (drawing 32) Chain tensioner DC Motor 24V for carriage (B9A-8.2) Woodruff key Countersunk screw Retaining ring Adjusting washer Retaining ring Chain wheel/ motor Threaded pin Washer Toothed washer Cylindrical screw Roller chain complete with bolt (B9A-8.13) √ Bolt for roller chain complete with bushing Deep groove ball bearing B9A-8/1 BS936-8-2 B9A-8/3 B9A-8/4 B9A-8/5 B9A-8/6 B9A-8/7 B9A-8/8 B9A-8/9 B9A-8/10 B9A-8/11 B9A-8/12 BS936-8-13 B9A-8/14 B9A-6/19 55/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.33 935 / 936 / 937 Chain wheel carrier (Drawing 33) REF 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 9.10 9.11 9.12 9.13 9.14 PART NO DESCRIPTION B9A-9 Chain wheel-carrier complete. (drawing 33) Bearing plate Grooved taper pin Shaft of carrier Encoder 128 (B9A-9.4) Threaded pin Feather key Retaining ring Levelling washer for ball bearing Retaining ring Cylindrical ball bearing Sprocket wheel Threaded pin Washer Countersunk screw B9A-9/1 B9A-9/2 B9A-9/3 BS936-9-4 B9A-9/5 B9A-9/6 B9A-9/7 B9A-9/8 B9A-9/9 B9A-9/10 B9A-9/11 B9A-9/12 B9A-9/13 B9A-9/14 56/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.34 935 / 936 / 937 Cover plate assembly for chain drive (Drawing 34) REF PART NO DESCRIPTION 10.1 10.2 10.3 10.4 10.5 B9A-10 B9A-10/1 B9A-10/2 B9A-10/3 B9A-10/4 B9A-10/5 Cover plate complete (drawing 34) Cover plate Threaded pin Hexagon nut Hexagon nut Hexagon nut 57/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.35 935 / 936 / 937 Foot complete (Drawing 35) 1 piece per machine REF PART NO DESCRIPTION 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 B9A-11 B9A-11/1 BS936-11-2 BS936-11-3 B9A-11/4 B9A-11/5 B9A-11/6 B9A-11/7 B9A-11/8 Foot complete (drawing 35) Foot Foot holder (B9A-11.2) Rubber for foot (B9A-11.3) Countersunk screw Washer Hexagon nut Hexagon nut Threaded pin 58/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.36 935 / 936 / 937 Foot (LARGE) complete (Drawing 36) REF PART NO DESCRIPTION 12.1 12.2 12.3 12.4 12.5 12.6 11.2 11.3 B9A-12 B9A-12/1 B9A-12/2 B9A-12/3 B9A-12/4 B9A-12/5 B9A-12/6 BS936-11-2 BS936-11-3 Foot (large) complete (drawing 36) Foot (large) Foot holder for machine body Countersunk screw Washer Hexagon nut Threaded pin Foot Holder (B9A-11.2) Rubber for foot (B9A-11.3) 59/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.37 935 / 936 / 937 Foot (SMALL) complete (Drawing 37) REF PART NO DESCRIPTION 13.1 13.2 13.3 13.4 13.5 13.6 13.7 11.2 11.3 12.2 B9A-13 B9A-13/1 B9A-13/2 B9A-13/3 B9A-13/4 B9A-13/5 B9A-13/6 B9A-13/7 BS936-11-2 BS936-11-3 B9A-12/2 Foot (small) complete (drawing 37) Foot (small) Foot holder for base plate Countersunk screw Washer Hexagon nut Threaded pin Washer Foot holder (B9A-11.2) Rubber for foot (B9A-11.3) Foot holder for machine body 60/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.38 935 / 936 / 937 Adjuster complete (Drawing 38) PART NO DESCRIPTION B9A-14 B9A-14/1 B9A-14/2 B9A-14/3 B9A-14/4 B9A-14/5 B9A-14/6 B9A-14/7 B9A-14/8 Adjuster complete (drawing 38) Plate for adjuster Axle for adjuster Synchronizing plate Washer Hexagon nut Retaining ring Washer Flange sleeve REF 14.1 14.2 14.3 14.4 14.5 14.6 14.7 14.8 61/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.39 935 / 936 / 937 Deflection roller for base plate (Drawing 39) REF 15.1 15.2 15.3 15.4 15.5 15.6 PART NO DESCRIPTION B9A-15 Deflection roller for base plate complete (drawing 39) Support for deflection roller for base plate Hexagon screw Needle bearing Adjusting washer Seal Washer B9A-15/1 B9A-15/2 B9A-15/3 B9A-15/4 B9A-15/5 B9A-15/6 62/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.40 935 / 936 / 937 Meat table and support assembly (Drawing 40) 63/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.40 935 / 936 / 937 Meat table and support assembly (Drawing 40) REF PART NO DESCRIPTION 50 50 51 B9A-40d B9A-50 B9A-50T B9A-51 52 B9A-52 53 54 54 55 56 B9A-53 B9A-54 B9A-54T B9A-55 B9A-56 57 58 59a 59b B9A-57 B9A-58 B9A-59a B9A-59b 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 B9A-60 B9A-61 B9A-62 B9A-63 B9A-64 B9A-65 B9A-66 B9A-67 B9A-68 B9A-69 B9A-70 B9A-71 B9A-72 B9A-73 B9A-74 B9A-75 B9A-76 B9A-77 B9A-78 B9A-79 B9A-80 BS936-81 Carriage complete (drawing 40) Carriage complete, standard execution Carriage complete, standard, Teflon Adjusting bar complete for standard carriage (Drawing 41) Adjusting bar complete for cheese – short (drawing 42) Bottom plate for carriage – short Carriage 530 mm complete Carriage 530mm complete, Teflon Adjusting bar for carriage 530 mm (drawing 43) Adjusting bar for cheese for carriage 530 mm (Drawing 44) Bottom plate for carriage 530 mm Driving unit end piece holder (drawing 45) Bottom metal plate for end piece holder (Drawing 46a) Bottom metal plate for end piece holder with spikes for cheese (Drawing 46b) End piece holder complete (Drawing 47) Claw end piece holder complete (Drawing 48) Carriage arm complete (Drawing 50) Guide shaft for adjusting bar Washer Toothed washer Hexagon screw Cylindrical screw Grooved taper pin Washer Toothed washer Hexagon nut Hand guard for carriage – transparent plastic Distance piece Cover plate Handle for carriage Cap for handle Cylindrical screw Plastic cap Plastic cap Washer Cylindrical screw 64/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.41 935 / 936 / 937 Product fence assembly (Standard) (Drawing 41) REF 51.1 51.2 51.3 PART NO DESCRIPTION BS936-51 Adjusting bar complete for standard carriage (drawing 41) (B9A-51) Adjusting bar complete – short Threaded bolt Wing nut B9A-51/1 B9A-51/2 B9A-51/3 65/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.42 935 / 936 / 937 Product fence for cheese (Short) (Drawing 42) REF 52.1 51.2 51.3 5.3.43 PART NO DESCRIPTION B9A-52 Adjusting bar complete for cheese – short (drawing 42) Adjusting bar complete for cheese – short Threaded nut Wing nut B9A-52/1 B9A-51/2 B9A-51/3 935 / 936 / 937 Product fence for table 530mm (Drawing 43) REF 55.1 51.2 51.3 PART NO DESCRIPTION B9A-55 Adjusting bar for carriage 530 mm (drawing 43) Adjusting bar for carriage 530 mm Threaded bolt Wing nut B9A-55/1 B9A-51/2 B9A-51/3 66/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.44 REF 56.1 51.2 51.3 935 / 936 / 937 Product fence for table 530mm Cheese (Drawing 44) PART NO DESCRIPTION B9A-56 Adjusting bar for cheese for carriage 530 mm (drawing 44) Adjusting bar for cheese for carriage 530 mm Threaded nut Wing nut B9A-56/1 B9A-51/2 B9A-51/3 67/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.45 935 / 936 / 937 Driving unit for End Piece Holder EPH (Drawing 45) 68/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.45 REF 935 / 936 / 937 Driving unit for End Piece Holder EPH (Drawing 45) PART NO DESCRIPTION B9A-58 Driving end unit piece holder (drawing 45) End piece holder arm Guiding piece for end piece holder Locking part for guiding piece for standard carriage Locking part for guiding piece for large carriage Guiding bar for end piece holder arm Washer for end piece holder arm Front plate for motor housing Plate for step motor Support for spindle Cover plate Trapezoid spindle Trapezoid spindle for large carriage 530 mm Lock out device Pressure piece Guiding bar for guiding piece for standard carriage Guiding bar for guiding piece for end piece holder for large carriage Brass half nut for end piece holder (BSA58.17) √ Metal for reed switch Washer Toothed washer Hexagon screw Handle for end piece holder without rosette Threaded bolt Countersunk screw Countersunk screw Hexagon nut Round magnet Threaded pin Threaded pin Hexagon nut Pressure spring Grooved taper pin Countersunk screw 58.1 58.2 58.3 B9A-58/1 B9A-58/2 B9A-58/3 58.4 B9A-58/4 58.5 58.6 58.7 58.8 58.9 58.10 58.11 58.12 58.13 58.14 58.15 B9A-58/5 B9A-58/6 B9A-58/7 B9A-58/8 B9A-58/9 B9A-58/10 B9A-58/11 B9A-58/12 B9A-58/13 B9A-58/14 B9A-58/15 58.16 B9A-58/16 58.17 BS936-58-17 58.18 58.19 58.20 58.21 58.22 58.23 58.24 58.25 58.26 58.27 58.28 58.29 58.30 58.31 58.32 58.33 B9A-58/18 B9A-58/19 B9A-58/20 B9A-58/21 B9A-58/22 B9A-58/23 B9A-58/24 B9A-58/25 B9A-58/26 B9A-58/27 B9A-58/28 B9A-58/29 B9A-58/30 B9A-58/31 B9A-58/32 B9A-58/33 69/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.45 935 / 936 / 937 Driving unit for End Piece Holder EPH (Drawing 45) Continued… REF 58.34 58.35 58.36 58.37 58.38 58.39 58.40 58.41 58.42 58.43 58.44 58.45 58.46 58.47 58.48 58.49 58.50 58.51 4.32.1 PART NO DESCRIPTION B9A-58/34 B9A-58/35 B9A-58/36 B9A-58/37 B9A-58/38 B9A-58/39 B9A-58/40 B9A-58/41 B9A-58/42 B9A-58/43 B9A-58/44 B9A-58/45 B9A-58/46 B9A-58/47 B9A-58/48 B9A-58/49 B9A-58/50 B9A-58/51 BS936-4-32-1 Threaded pin Dry plain bearing Dry plain nearing Countersunk screw Hexagon nut Washer Toothed washer Countersunk screw Rotary shift Threaded pin Deep groove ball bearing Washer Countersunk screw Countersunk screw Reed switch Hexagon nut DU- bushing Bushing Step motor for end piece holder (B9A4.32.1) √ 70/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.46 REF 59a.1 59a.2 59a.3 59a.4 59a.5 59a.6 59a.7 59a.8 59a.9 75 76 935 / 936 / 937 Bottom feed plate for table (Drawing 46a) PART NO DESCRIPTION BS936-59A Bottom metal plate for end piece holder (drawing 46a) (B9A-59A) Bottom metal plate Guiding part (black plastic) Locking part (black plastic) Hexagon screw Female thread bushing Countersunk screw Hexagon nut Washer Cylindrical screw Plastic cap Plastic cap B9A-59a/1 B9A-59a/2 B9A-59a/3 B9A-59a/4 B9A-59a/5 B9A-59a/6 B9A-59a/7 B9A-59a/8 B9A-59a/9 B9A-78 B9A-79 71/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.47 REF 935 / 936 / 937 Bottom feed plate for table, with spikes for cheese (Drawing 46b) PART NO DESCRIPTION B9A-59b Bottom metal plate for end piece holder with spikes for cheese (drawing 46b) Bottom metal plate for end piece holder with spikes Guiding part (black plastic) Locking part (black plastic) Hexagon screw Female thread bushing Countersunk screw Hexagon nut Washer Cylindrical screw Plastic cap Plastic cap 59b.1 B9A-59b/1 59a.2 59a.3 59a.4 59a.5 59a.6 59a.7 59a.8 59a.9 75 76 B9A-59a/2 B9A-59a/3 B9A-59a/4 B9A-59a/5 B9A-59a/6 B9A-59a/7 B9A-59a/8 B9A-59a/9 BS936-78 BS936-79 72/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.48 935 / 936 / 937 End Piece Holder (Drawing 47) 73/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.48 936 End Piece Holder (Drawing 47) REF 60.1 60.2 60.3 60.4 60.5 60.6 60.7 60.8a 60.8b 60.9 60.10 60.11 60.12 60.13 60.14 60.15 60.16 58.1 PART NO DESCRIPTION BS936-60 End piece holder complete (drawing 47) End piece holder complete End piece holder for cheese execution Comb for end piece holder (B9A-60.3) Comb for end piece holder for cheese Remnant holder plate (plastic) (B9A-60.5) Bolt for end piece holder Distance piece for end piece holder arm Plate for handle of end piece holder Plate for handle of end piece holder Handle for end piece holder with rosette Knurled knob for blade guard Hexagon cap nut Countersunk screw Plastic screw for remnant holder Lend head screw Grooved taper pin Grooved taper pin End piece holder arm complete B9A-60/1 B9A-60/2 BS936-60-3 B9A-60/4 BS936-60-5 B9A-60/6 B9A-60/7 B9A-60/8a B9A-60/8b B9A-60/9 B9A-60/10 B9A-60/11 B9A-60/12 B9A-60/13 B9A-60/14 B9A-60/15 B9A-60/16 B9A-58/1 74/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.49 935 / 936 / 937 Claw gripper End Piece Holder assembly (Drawing 48) 75/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.49 935 / 936 / 937 Claw gripper End Piece Holder assembly (Drawing 48) REF PART NO DESCRIPTION BS936-61 Claw end piece holder complete (drawing 48) (B9A-61) end piece holder compl. Comb for end piece holder Plate for handle of end piece holder Plate for handle of end piece holder Handle for end piece holder with rosette Knurled knob for blade guard Hexagon cap nut Countersunk screw Plastic screw for remnant holder Lens head screw Grooved taper pin Grooved taper pin Claw end piece holder complete (drawing 49) Bolt for claw end piece holder (B9A-61.2) Distance piece for end piece holder arm (B9A-61.3) End piece holder arm 60.1 60.3 60.8a 60.8b 60.9 60.10 60.11 60.12 60.13 60.14 60.15 60.16 61.1 B9A-60/1 B9A-60/3 B9A-60/8a B9A-60/8b B9A-60/9 B9A-60/10 B9A-60/11 B9A-60/12 B9A-60/13 B9A-60/14 B9A-60/15 B0A-60/16 B9A-61/1 61.2 61.3 BS936-61-2 BS936-61-3 58.1 B9A-58/1 76/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.50 935 / 936 / 937 Claw gripper (Drawing 49) 77/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.50 935 / 936 / 937 Claw gripper (Drawing 49) REF 61.1.1 61.1.2a 61.1.2a 61.1.3 61.1.4 61.1.5 61.1.6 61.1.7 61.1.8 61.1.9 61.1.10 61.1.11 61.1.12 61.1.13 61.1.14 61.1.15 61.1.16 PART NO DESCRIPTION B9A-61/1 Claw end piece holder complete (drawing 49) Claw end piece holder Distance bushing Distance bushing-2 Claw shaft 1 Claw shaft 11 Claw shaft 111 Fixing part Fixing part Adjusting lever Handle Threaded pin Threaded pin Threaded pin Grooved taper pin Stud Washer Cylindrical screw B9A-61/1/1 B9A-61/1/2a B9A-61/1/2a B9A-61/1/3 B9A-61/1/4 B9A-61/1/5 B9A-61/1/6 B9A-61/1/7 B9A-61/1/8 B9A-61/1/9 B9A-61/1/10 B9A-61/1/11 B9A-61/1/12 B9A-61/1/13 B9A-61/1/14 B9A-61/1/15 B9A-61/1/16 78/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.51 935 / 936 / 937 Carriage support arm complete (Drawing 50) REF PART NO DESCRIPTION 62.1 62.2 62.3 62.4 62.5 62.6 62.7 62.8 B9A-62 B9A-62/1 B9A-62/2 B9A-62/3 BS936-62-4 BS936-62-5 B9A-62/6 B9A-62/7 B9A-62/8 Carriage arm complete (drawing 50) Carriage arm Safety device Plastic tube Star knob for carriage arm (315VCE040A2SF) Washer (B9A-62.5) Hexagon nut Grooved taper pin Hexagon screw 79/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.52 935 / 936 / 937 Blade protection and slice deflector complete (Drawing 51) 80/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.52 935 / 936 / 937 Blade protection and slice deflector complete (Drawing 51) REF PART NO DESCRIPTION B9A-51d Assembly blade – blade protection (drawing 51) Fixed ring around the blade complete (B9A90) Deflector complete (drawing 52) Fixing screw for blade guard complete (B9A-92) Motor complete (drawing 53) B9A-93 Knife hub complete (drawing 54) B9A94 Blade guard 936-937 (B9B-95) Blade guard 935 Flange for blade guard Blade 330 mm, 100CR6 Blade 330mm, St St Blade 330mm, teflon (100CR6) Fixing ring (blade guard) Nylon block blade guard Lug (B9A-100) Gear bearing Support for knife bearing Washer Spring washer Hexagon screw Threaded pin Nut for knife axle Countersunk screw Cylindrical screw Deflector Countersunk screw (B9A-111) Washer Toothed washer Hexagon screw 90 BS936-90 91 92 B9A-91 BS936-92 93 94 BS936-93 BS936-94 95 95 96 97 97 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 BS936-95 B95-95 B9A-96 3330-55XW 3330-56XW 3330-55TXW B9A-98 B9A-99 BS936-100 B9A-101 B9A-102 B9A-103 B9A-104 B9A-105 B9A-106 B9A-107 B9A-108 B9A-109 B9A-110 BS936-111 B9A-112 B9A-113 B9A-114 81/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.53 935 / 936 / 937 Slice deflector (Drawing 52) REF PART NO DESCRIPTION 91.1 91.2 91.3 91.4 91.5 91.6 91.7 91.8 91.9 91.10 B9A-91 B9A-91/1 B9A-91/2 B9A-91/3 B9A-91/4 B9A-91/5 B9A-91/6 B9A-91/7 B9A-91/8 B9A-91/9 B9A-91/10 Deflector complete (drawing 52) Deflector Support for deflector Threaded pin Hexagon nut Cap Hexagon screw Washer Disk spring Cover cap, black Cylindrical screw 82/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.54 935 / 936 / 937 Blade drive motor (Drawing 53) 83/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.54 935 / 936 / 937 Blade drive motor (Drawing 53) REF 93.1. 93.1.1 93.1.2 93.2 93.3 93.4 93.5 93.6 93.7 93.8 93.9 PART NO DESCRIPTION BS936-93 Motor complete (drawing 53) (B9A93) Motor, three phase Deep groove ball bearing Deep groove ball bearing Motor single-phase Distance piece for motor Worm Nut for motor Spring at motor Feather key Spring washer Ring B9A-93/1 B9A-93/1/1 B9A-93/1/2 B9A-93/2 B9A-93/3 B9A-93/4 B9A-93/5 B9A-93/6 B9A-93/7 B9A-93/8 B9A-93/9 84/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.55 935 / 936 / 937 Knife shaft hub bearing assembly (Drawing 54) 85/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.55 935 / 936 / 937 Knife shaft hub bearing assembly (Drawing 54) REF 94.1 94.2 94.3 94.4 94.5 94.6 94.7 94.8 94.9 94.10 94.11 94.12 94.13 94.14 94.15 94.16 PART NO DESCRIPTION BS936-94 Knife hub complete (drawing 54) (B9A-94) Knife hub Knife axle Helical gear for knife hub (B9A-94.3) Deep groove ball bearing Levelling washer for ball bearing Retaining ring Adjusting washer Rotary shaft Rubber gasket Buffer, metal Rubber buffer, yellow Rubber buffer, black Adjusting washer Retaining ring Retaining ring Adjusting washer B9A-94/1 B9A-94/2 BS936-94-3 B9A-94/4 B9A-94/5 B9A-94/6 B9A-94/7 B9A-94/8 B9A-94/9 B9A-94/10 B9A-94/11 B9A-94/12 B9A-94/13 B9A-94/14 B9A-94/15 B9A-94/16 86/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.56 937 Conveyor belt complete (drawing 55) 87/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.56 937 Conveyor belt complete (drawing 55) REF PART NO DESCRIPTION 1 2 3 B97-01 B97-1 B97-2 B97-3 4 5 6 7 B97-4 B97-5 B97-6 B97-7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 B97-8 B97-9 B97-10 BS937-11 BS937-12 B97-13 B97-14 B97-15 B97-16 B97-17 B97-18 B97-19 B97-20 B97-21 B97-22 B97-23 B97-24 B97-25 B97-26 Conveyor belt complete (drawing 55) Conveyor belt Roller complete (drawing 56) Deflection roller complete (drawing 57) Small roller complete (drawing 58) End switch complete (drawing 59) Strap complete drawing (60) Driving unit for conveyor belt complete (drawing 61) Bearing Sealing Cover for gear Toothed belt 228XL (B97-11) Green belt (B97-12) Hexagon cap nut Threaded pin Hexagon nut Toothed washer Washer Countersunk screw Countersunk screw Plastic cap Countersunk screw Washer Plastic cap Countersunk screw Toothed washer Hexagon nut 88/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.57 937 Roller complete (drawing 56) REF PART NO DESCRIPTION 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 B97-2 B97-2/1 B97-2/2 B97-2/3 B97-2/4 B97-2/5 B97-2/6 B97-2/7 B97-2/8 B97-2/9 B97-2/10 Roller complete (drawing 56) Roller Bearing disk for roller (right side) Bearing disk for roller (left side) Axle for roller Synchronising plate Deep groove ball bearing Retaining ring Countersunk screw DU-bushing Countersunk screw 89/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.58 937 Deflection roller complete (drawing 57) REF 3.1 3.2 3.3 3.4 2.4 PART NO DESCRIPTION B97-3 Deflection roller complete (drawing 57) Deflection roller Deep groove ball bearing Deep groove ball bearing Retaining ring Axle for roller B97-3/1 B97-3/2 B97-3/3 B97-3/4 B97-2/4 90/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.59 937 Small roller complete (drawing 58) REF PART NO DESCRIPTION 4.1 4.2 4.3 4.4 4.5 B97-4 B97-4/1 B97-4/2 B97-4/3 B97-4/4 B97-4/5 Small roller complete (drawing 58) Small roller Axle for small roller DU-bushing Washer Retaining ring 91/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.60 937 End switch complete (drawing 59) REF PART NO DESCRIPTION 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.10 5.11 5.12 B97-5 B97-5/1 B97-5/2 B97-5/3 B97-5/4 B97-5/5 B97-5/6 B97-5/7 B97-5/8 B97-5/9 B97-5/10 B97-5/11 B97-5/12 End switch complete (drawing 59) Contactor for end switch Angle Plate Bolt Hexagon screw Washer Toothed washer Hexagon nut Countersunk screw Toothed washer Hexagon nut Reed switch 92/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.61 937 Strap complete (drawing 60) REF PART NO DESCRIPTION 6.1 6.2 6.3 B97-6 B97-6/1 B97-6/2 B97-6/3 Strap complete drawing (60) Strap for conveyor belt Countersunk screw Lug 93/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.62 937 Driving unit for conveyor belt complete (drawing 61) 94/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.62 937 Driving unit for conveyor belt complete (drawing 61) REF 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 7.10 7.11 7.12 7.13 7.14 7.15 7.16 7.17 7.18 7.19 PART NO DESCRIPTION B97-7 Driving unit for conveyor belt complete (drawing 61) Bearing plate (front) Protecting tube Bearing plate (back) Distance piece-bearing plate Threaded shaft Motor (B97-7.6) Synchronising plate Threaded pin Rotary shaft seal Washer Spring washer Hexagon screw Washer Toothed washer Cylindric screw Washer Toothed washer Hexagon nut Hexagon cap nut B97-7/1 B97-7/2 B97-7/3 B97-7/4 B97-7/5 BS937-7-6 B97-7/7 B97-7/8 B97-7/9 B97-7/10 B97-7/11 B97-7/12 B97-7/13 B97-7/14 B97-7/15 B97-7/16 B97-7/17 B97-7/18 B97-7/19 95/97 ILLUSTRATED PARTS HANDBOOK FOR THE 935, 936, 937 AUTOMATIC SLICERS 5.3.63 Additional key Parts PART NO DESCRIPTION BS936-130 BS936-130-REP BS936-133 BS936-133-REP B9A-131 BS935-132 B9B-132 B9A-133A BS936-133B BS936-135 BS935-135 BS936-S-06 B9A-009 BS936-4/22MF BS936-4/22TF Main board for 935 / 936 / 937 √ (B9A-130) Main board (exchange) for 935 / 936 / 937 Head up Display complete 936 / 937 √ (B9B-133) Head up display complete 936 / 937 exchange Safety label Keyboard foil (B95-132) Key board Relay board 400V Relay board 230V (BS93A-133.B) Bus Board 936 / 937 (B9B-135) Bus board 935 (B95-135) Sharpener stone Sharpener assembly Transformer 230V 50hz, 1 ph (BS936-4.22MF) Transformer 400V 50hz, 3 ph (BS936-4.22TF 96/97 Service Manual