Transcript
Bellerive & Berwick wood inbuilts C
A
D
dimensions B E
F
A 1100 940
Bellerive Berwick
P
Depth 468 420
clearances
Mantle key must be less than 40 mm thick
N
K L O
C 544 479
D 464 415
E 590 585
F 695 637
G 150 177
minimum fireplace openings
G
Bellerive Berwick
M
B 730 698
Bellerive Berwick
Mantle uprights must be less than 70 mm thick
H 1020 875
I 300 300
Width Height 699 597 640 589
J 90 90
K 1200 970
L 990 920
M 490 400
N 400 350
O 75 75
P 200 200
I J H
Zero clearance framing Note: The Bellerive and Berwick are approved for zero clearance installations – please see manual for exact instructions. It is important to understand and check local regulations prior to commencing installation.
Zero clearance framing Bellerive Berwick
A 1300 1010
B 235 90
C 680 680
D 250 250
E 930 930
F 580 580
G 50 50
Zero clearance box dimensions
D
Bellerive Berwick
E C
X 830 830
Y 680 680
Z 530 530
Y
G F
B A
B
Z X
* - Heating capacity and any burn times are a guide only and can be affected by some or all of the following examples: drafts under doorways or between floorboards, large glass areas not covered by heavy drapes/curtains, green, wet or damp wood, ceiling heights greater than 2.4 metres or cathedral type ceilings, poor or no insulation. Note: All product specifications are subject to change without notice. Before installing refer to the relevant product manual for full and up to date information. Product pictures are a guide only, all wood fires must be installed as per AS 2918 :2001. All Regency wood fires pass and exceed stringent joint Australian and New Zealand Standards AS/NZS 4012 and AS/NZS 4013 :1999
Not all products are available at all outlets.
11
