Preview only show first 10 pages with watermark. For full document please download

Bes-540c 400 Watt

   EMBED


Share

Transcript

Industrial PC power supplies Extended Delivery YEARS 5 5 YEARS Extended Eco Delivery Operation Eco 400 Watt Operation NEW +24 V DC input TÜV and UL approved High efficiency >81 % The DC PC power supply BES-540C has been designed for use in industry, logistics and transport. Thanks to its broad input voltage range of 18 to 36 V DC it is immune to high input voltage fluctuations. With a high output power load of +12 V DC it is capable of safely supplying the necessary power for high-performance graphic applications. The fan on roller bearing is temperature controlled and provides a tachometer signal for monitoring. Te c h n i c a l d a t a Input voltage Input current Inrush current Efficiency Hold up time Power-Good-Signal Protection Safety / EMC Operating temperature Derating MTBF Storage temperature Operating humidity Dimensions (W x D x H) Weight (net) Article No. BES-540C Output voltage +3.3 V +5 V +12 V -12 V +5 Vsb +24 V DC (18…36 V) 22 A max. at 24 V DC <60 A (24 V DC / 25 °C) >81 % at full load App. 1.6 ms Switch on delay 100…500 ms Short circuit protection: Switch off with auto-recovery Inverse polarity protection input: existing Overvoltage protection: +3.3 V (+3.6…+4.3 V), +5 V (+5.6…+6.5 V), +12 V (+13.2…+15 V), switch off CE, EN 60950-1, UL 60950-1 0…+70 °C, startable from -20 °C +40…+70 °C 1 % / °C 121 000 h according to MIL-HDBK-217F at +50 °C with fan -20…+80 °C 20…85 % RH, non-condensing 150 x 140 x 86 mm ±0.5 mm 1.65 kg Output current min max 0 A * 25 A 0 A * 25 A 0 A * 30 A 0 A 0.8 A 0.1 A 3.5 A Load regulation ±5 % ±5 % ±5 % ±10 % ±5 % Line regulation ±1 % ±1 % ±1 % ±1 % ±1 % Cross regulation ±5 % ±5 % ±5 % ±5 % ±5 % Ripple & Noise ±50 mV ±50 mV ±120 mV ±120 mV ±50 mV * A total minimum base load of 10 W is required. Max. output power is 400 W, combined max. output power at +3.3 V and +5 V is 35 A. Ripple and Noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 220 µF electrolytic capacitor and 100 nF ceramic capacitor at each output. As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards. Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel.   +49 906 70595-0 | [email protected] |  www.bicker.de DC input BES-540C Industrial PC power supplies Drawing BES-540C DC input A A' Tolerance ±0.5 mm Cable harness BES-540C BLACK RED RED RED WHITE BLACK BLACK BLACK GREEN BLACK BLUE ORANGE ATX/EPS, 550 mm 20+4 Pin EPS, 550 mm Specification is subject to change without notice. Errors excepted. Status as at: 09.12.2011 P4/EPS, 550 mm 4+4 Pin PCI Express, 500 mm 6+2 Pin PCI Express, 500 mm 6+2 Pin SATA 90°, 350 mm SATA 90°, 150 mm HD, 400 mm HD, 150 mm HD, 150 mm A1 (GND) (+5V) (+5V) (+5V) (–5V) (GND) (GND) (GND) (PSon) (GND) (-12V) (+3,3V) YELLOW YELLOW YELLOW YELLOW (+12V) (+12V) (+12V) (+12V) YELLOW YELLOW YELLOW YELLOW (+12V) (+12V) (+12V) (+12V) 8 7 6 5 4 3 2 1 8 7 6 5 ORANGE YELLOW YELLOW PURPLE GREY BLACK RED BLACK RED RED BLACK ORANGE ORANGE ORANGE BLACK BLACK BLACK BLACK 4 3 2 1 BLACK BLACK BLACK BLACK (GND) (GND) (GND) (GND) (GND) (GND) (GND) (GND) 8 7 6 5 4 3 2 1 BLACK YELLOW YELLOW YELLOW (GND) (+12V) (+12V) (+12V) BLACK BLACK BLACK BLACK (GND) (GND) (GND) (GND) 8 7 6 5 4 3 2 1 BLACK YELLOW YELLOW YELLOW (GND) (+12V) (+12V) (+12V) A1 4 3 2 1 ORANGE BLACK RED BLACK YELLOW RED BLACK BLACK YELLOW 4 3 2 1 4 3 2 1 4 3 2 1 SATA, 450 mm SATA, 150 mm (+3,3V) (GND) (+5V) (GND) (+12V) A1 (+5V) (GND) (GND) (+12V) RED BLACK BLACK YELLOW (+5V) (GND) (GND) (+12V) RED BLACK BLACK YELLOW (+5V) (GND) (GND) (+12V) 4 YELLOW (+12V) 3 BLACK (GND) 2 BLACK (GND) 1 RED (+5V) ORANGE BLACK RED BLACK YELLOW (+3,3V) (GND) (+5V) (GND) (+12V) ORANGE BLACK RED BLACK A1 YELLOW (+5V) (GND) (GND) (+12V) RED BLACK BLACK YELLOW RED BLACK BLACK YELLOW (+3,3V) (+12V1) (+12V1) (+5Vsb) (PG) (GND) (+5V) (GND) (+5V REMOTE SENSE) (+5V) (GND) (+3,3V) (+3,3V REMOTE SENSE) (+3,3V) (GND) (GND) (GND) (GND) BLACK BLACK BLACK BLACK 4 3 2 1 HD, 400 mm HD, 150 mm FDD, 150 mm 12 11 10 9 8 7 6 5 4 3 2 1 24 23 22 21 20 19 18 17 16 15 14 13 (+3,3V) (GND) (+5V) (GND) (+12V) SATA, 450 mm SATA, 150 mm ORANGE BLACK RED BLACK A1 YELLOW (+5V) (GND) (GND) (+12V) (+3,3V) (GND) (+5V) (GND) (+12V) ORANGE BLACK RED BLACK A1 YELLOW (+3,3V) (GND) (+5V) (GND) (+12V) Fan control, 580 mm BLACK N.C. WHITE Tolerance ±20 mm Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel.   +49 906 70595-0 | [email protected] |  www.bicker.de