Transcript
Industrial PC power supplies
5 5
Extended Delivery
YEARS
Extended
YEARS
BES-540T
Eco Delivery
Operation Eco
Operation
DC input
400 Watt
– 48 V DC input TÜV and UL approved High efficiency >80 % The DC PC power supply BES-540T has been designed for use in industry, telecom and transport. Thanks to its broad input voltage range of –36 to –72 V DC it can be supplied via – 48 V DC as well as – 60 V DC power networks. With a high output power load of +12 V DC it is capable of safely supplying the necessary power for high-performance graphic applications. The fan on roller bearing is temperature controlled and provides a tachometer signal for monitoring.
Te c h n i c a l d a t a Input voltage Input current Inrush current Efficiency Hold up time Power-Good-Signal Protection Safety / EMC Temperature Derating MTBF Max. operation altitude Humidity Dimensions (W x D x H) Weight (net)
Article No. BES-540T
Output voltage +3.3 V +5 V +12 V -12 V +5 Vsb
-48 V DC (-36…-72 V) 11 A max. at -48 V DC <50 A (-48 V DC / 25 °C) >80 % at full load App. 1 ms Switch on delay 100…500 ms Short circuit protection: Switch off with auto recovery Inverse polarity protection input: existing Overvoltage protection: +3.3 V (+3.6…+4.3 V), +5 V (+5.6…+6.5 V), +12 V (+13.2…+15 V), switch off CE, EN 60950-1, UL 60950-1 Operating: 0…+70 °C, startable from -20 °C / Storage: -20…+80 °C +50…+70 °C 1.35 % / °C 119 000 h according to MIL-HDBK-217F at 50 °C with fan 3100 m Operating: 10…85 % RH, non-condensing / Storage: 10…90 % RH, non-condensing 150 x 140 x 86 mm ±0.5 mm 1.65 kg
Output current min max 0 A * 25 A 0 A * 25 A 0 A * 32 A 0 A 0.8 A 0.1 A 3.5 A
Load regulation ±5 % ±5 % ±5 % ±10 % ±5 %
Line regulation ±1 % ±1 % ±1 % ±1 % ±1 %
Cross regulation ±5 % ±5 % ±5 % ±5 % ±5 %
Ripple & Noise ±50 mV ±50 mV ±120 mV ±120 mV ±50 mV
* A total minimum base load of 10 W is required. Max. output power is 400 W, combined max. output power at +3.3 V and +5 V is 40 A. Ripple and Noise was measured by a 20 MHz bandwidth limited oscilloscope with connected 220 µF electrolytic capacitor and 100 nF ceramic capacitor at each output. As a power component this PSU is for assembly purposes only and must not be operated in unassembled condition. The final assembly has to comply with the valid EMC and safety standards.
Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel. +49 906 70595-0 |
[email protected] | www.bicker.de
Industrial PC power supplies Drawing BES-540T DC input
A
A'
Tolerance ±0.5 mm
Cable harness BES-540T BLACK RED RED RED WHITE BLACK BLACK BLACK GREEN BLACK BLUE ORANGE
ATX/EPS, 550 mm 20+4 Pin
EPS, 550 mm
Specification is subject to change without notice. Errors excepted. Status as at: 11.07.2013
P4/EPS, 550 mm 4+4 Pin PCI Express, 500 mm 6+2 Pin PCI Express, 500 mm 6+2 Pin SATA 90°, 350 mm SATA 90°, 150 mm HD, 400 mm HD, 150 mm HD, 150 mm
A1
(GND) (+5V) (+5V) (+5V) (–5V) (GND) (GND) (GND) (PSon) (GND) (-12V) (+3,3V)
YELLOW YELLOW YELLOW YELLOW
(+12V) (+12V) (+12V) (+12V)
YELLOW YELLOW YELLOW YELLOW
(+12V) (+12V) (+12V) (+12V)
8 7 6 5
4 3 2 1
8 7 6 5
ORANGE YELLOW YELLOW PURPLE GREY BLACK RED BLACK RED RED BLACK ORANGE ORANGE ORANGE
BLACK BLACK BLACK BLACK
4 3 2 1
BLACK BLACK BLACK BLACK
(GND) (GND) (GND) (GND)
(GND) (GND) (GND) (GND)
8 7 6 5
4 3 2 1
BLACK YELLOW YELLOW YELLOW
(GND) (+12V) (+12V) (+12V)
BLACK BLACK BLACK BLACK
(GND) (GND) (GND) (GND)
8 7 6 5
4 3 2 1
BLACK YELLOW YELLOW YELLOW
(GND) (+12V) (+12V) (+12V)
A1
4 3 2 1
ORANGE BLACK RED BLACK YELLOW
RED BLACK BLACK YELLOW 4 3 2 1
4 3 2 1
SATA, 450 mm SATA, 150 mm ORANGE BLACK RED BLACK A1 YELLOW
(+3,3V) (GND) (+5V) (GND) (+12V)
(+5V) (GND) (GND) (+12V)
RED BLACK BLACK YELLOW
(+5V) (GND) (GND) (+12V)
4 3 2 1
RED BLACK BLACK YELLOW
(+5V) (GND) (GND) (+12V)
4 3 2 1
YELLOW BLACK BLACK RED
(+12V) (GND) (GND) (+5V)
(+3,3V) (GND) (+5V) (GND) (+12V)
ORANGE BLACK RED BLACK A1 YELLOW
(+5V) (GND) (GND) (+12V)
RED BLACK BLACK YELLOW
RED BLACK BLACK YELLOW
(+3,3V) (+12V1) (+12V1) (+5Vsb) (PG) (GND) (+5V) (GND) (+5V REMOTE SENSE) (+5V) (GND) (+3,3V) (+3,3V REMOTE SENSE) (+3,3V)
(GND) (GND) (GND) (GND)
BLACK BLACK BLACK BLACK
4 3 2 1
HD, 400 mm HD, 150 mm FDD, 150 mm
12 11 10 9 8 7 6 5 4 3 2 1
24 23 22 21 20 19 18 17 16 15 14 13
(+3,3V) (GND) (+5V) (GND) (+12V)
SATA, 450 mm SATA, 150 mm ORANGE BLACK RED BLACK A1 YELLOW
(+5V) (GND) (GND) (+12V)
(+3,3V) (GND) (+5V) (GND) (+12V)
ORANGE BLACK RED BLACK A1 YELLOW
(+3,3V) (GND) (+5V) (GND) (+12V)
Fan control, 580 mm BLACK N.C. WHITE
Tolerance ±20 mm
Bicker Elektronik GmbH | 86609 Donauwörth | Germany Tel. +49 906 70595-0 |
[email protected] | www.bicker.de
