Transcript
Ceramic
Bandpass Filter 50Ω
BFCW-542+
4700 to 6000 MHz
Features • Wide passband, 4700-6000 MHz • Low loss, 1.3 dB typ. • Small size 0603(1.6 x 0.8 mm ) • Temperature stable • LTCC construction
CASE STYLE:JC0603C-1
+RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications
Applications
and Reel Available Tape st at no extra co
• Wireless communication (ISM) • Harmonic Rejection • Transmitters / receivers
Reel Size 7”
Electrical Specifications1,2 at 25°C
Specification Definition
Parameter
INSERTION LOSS (dB) DC
F3
F1 F2 F4 FREQUENCY (MHz)
F5
Functional Schematic
Devices/Reel 20, 50, 100, 200, 500,1000, 4000
F#
Frequency (MHz)
Min.
Typ.
Max.
Unit
4700 - 6000 4700 - 6000
— —
5350 1.3 1.5
1.8 2.0
MHz dB :1
DC - F3
DC - 2500
30
34
—
dB
F4 - F5
9800 - 12000
26
34
—
dB
Pass Band
Center Frequency Insertion Loss VSWR
— F1 - F2 F1 - F2
Stop Band, Lower
Insertion Loss
Stop Band, Upper
Insertion Loss
1. Measured on Mini-Circuits Characterization Test Board TB-720+. 2. This filter is not intended for use as a DC Blocking circuit element. In Application where DC voltage is present at either input or output ports, blocking capacitors are required at the corresponding RF port.
Maximum Ratings Operating Temperature Storage Temperature* RF Power Input**
-55°C to +100°C -55°C to +100°C 1W at 25°C
* 12 months max. **Passband rating, derate linearly to 0.5W at 100°C ambient Permanent damage may occur if any of these limits are exceeded.
BFCW-542+ INSERTION LOSS (Pass Band)
BFCW-542+ INSERTION LOSS (Full Band)
Top View
0.0 INSERTION LOSS (dB)
INSERTION LOSS (dB)
0 20 40 60 80 0
3000
6000
9000
12000
FREQUENCY (MHz)
1.0 2.0 3.0 4.0 4700
5025
5350
5675
6000
FREQUENCY (MHz)
BFCW-542+ VSWR 2.0
VSWR
1.8
Pad Connections Input Output Ground
1.6 1.4 1.2
1 3 2,4
1.0 4700
5025
5350
5675
6000
Notes FREQUENCY (MHz) A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500
[email protected]
REV. A M151107 ED-16419/31 BFCW-542+ MY/CP/AM 150601 Page 1 of 2
BFCW-542+
Bandpass Filter Full Band Performance Frequency (MHz)
Insertion Loss (dB)
10 100 500 1000 2500 3300 4200 4700 5000 6000 6800 8000 9800 11000 12000
77.28 57.45 44.18 38.54 39.92 21.56 3.47 1.35 1.16 1.34 3.36 28.56 33.73 36.32 37.56
Pass Band Performance VSWR (:1) 508.40 289.52 127.06 85.51 55.73 31.19 2.94 1.35 1.28 1.13 2.06 17.19 23.08 20.32 25.90
Frequency (MHz) 4500 4600 4700 4800 4900 5000 5100 5200 5400 5500 5600 5700 5800 5900 6000
Insertion Loss (dB) 1.74 1.51 1.35 1.26 1.19 1.16 1.14 1.12 1.12 1.13 1.15 1.18 1.21 1.26 1.34
VSWR (:1) 1.61 1.45 1.35 1.29 1.27 1.28 1.29 1.30 1.32 1.31 1.30 1.26 1.22 1.14 1.13
Pad Connections Input Output Ground
1 3 2,4
Demo Board MCL P/N: TB-720+ Suggested PCB Layout (PL-412)
Outline Drawing
PCB Land Pattern
Suggested Layout, Tolerance to be within ±.002
Outline Dimensions ( inch mm ) A .063 1.60
B .031 0.79
C .024 0.61
D .018 0.46
E .028 0.71
F .006 0.15
G .012 0.30
K .032 0.81
L .028 0.71
M .012 0.30
N .049 1.24
P .026 0.66
Q .016 0.41
R .014 0.36
H .100 2.54
J .071 1.80 wt grams 0.005
Additional Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits Notes contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. please Mini-Circuits’ website at specification www.minicircuits.com/MCLStore/terms.jsp B. Electrical specifications andvisit performance data contained in this document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500
[email protected]
Page 2 of 2
