Transcript
GENERAL NOTES: 1. DIMENSIONS
OPTION
A
W/O STEAM COMPENSATION
8" [203]
W/ STEAM COMPENSATION
18" [457]
SHOWN IN INCHES W/ MM EQUIVALENTS IN BRACKETS OVERALL LENGTH = CENTERS + FLOAT LENGTH + 2 * MATING FLANGE THICKNESS + 8.25” [210] 2. OPERATING CONDITIONS PLUG 1/2" [15] NPT (SEE GENERAL NOTE 10) TYP. (2)
MAX PRESSURE, MAX TEMPERATURE, & MIN SPECIFIC GRAVITY REQUIRED FOR PROPER GAGE DESIGN 3. PART NUMBER
BILL OF MATERIAL NO.
18
2-1/2" [65] ANSI/ASME RAISED-FACE SOCKET WELD FLANGE TYP. (2) 20 21
®
CONSULT “MAGNICATOR II MAGNETIC LIQUID LEVEL INDICATION PRODUCTS” (BULLETIN M100.01) FOR COMPLETE PART NUMBER DETAILS & LIST OF AVAILABLE OPTIONS 4. STANDPIPE SIZE
2 ½” [65] SCH. 40 (STANDARD) MAGNICATOR STANDPIPE / 3" [80] SCH. 40 (STANDARD)
19
BY-PASS STANDPIPE
CONSULT FACTORY FOR OPTIONAL STANDPIPE SIZE AND/OR SCHEDULE (DEPENDENT ON OPERATING CONDITIONS) 5. MATERIALS OF CONSTRUCTION
304/304LSS W/ CS TRIM (FLANGES, BOLTING, & PLUGS) (STANDARD)
8" [203]
316/316LSS W/ CS TRIM (FLANGES, BOLTING, & PLUGS) (STANDARD)
17
(A) SEE TABLE ABOVE
ALL 304/304LSS (316SS BOLTING) (STANDARD)
3" [80] ANSI/ASME RAISED-FACE SLIP-ON FLANGE
8
ALL 316/316LSS (316SS BOLTING) (STANDARD) CONSULT “MAGNICATOR® II MAGNETIC LIQUID LEVEL INDICATION PRODUCTS” (BULLETIN
3" [76]
600#
M100.01) FOR A COMPLETE LIST OF AVAILABLE MATERIALS 15
6. FLOAT MATERIALS
1
MAGNICATOR STANDPIPE
2
FLANGE, SOCKET WELD
3
FLANGE, THREADED
4
FLOAT
5
PLUG
6
STUD
7
HEAVY HEX NUT
8
PROCESS CONNECTION
9
GASKET
10
INDICATOR
11
PIPET
12
REDUCER, CONCENTRIC
13
ELBOW
14
STANDPIPE NIPPLE
15
STANDPIPE NIPPLE
16
BY-PASS STANDPIPE
17
FLANGE, SOCKET WELD
18
GUIDED WAVE RADAR, FLANGED
19
GASKET
20
STUD
21
HEAVY HEX NUT
REMARKS
316LSS (STANDARD) TITANIUM (STANDARD) MONEL 400 HASTELLOY C276
7. FLOAT LENGTHS
MATERIAL
NAME OF PART
12” [305] (STANDARD)
PROCESS CONNECTION TYP. (2) (SEE GENERAL NOTE 9)
OPERATING CONDITIONS
1/2"
MAX PRESSURE 10
17” [432] (STANDARD)
1
16
MAX TEMPERATURE
22” [559] (STANDARD)
MIN SPECIFIC GRAVITY
LENGTHS DEPENDENT ON OPERATING CONDITIONS CONSULT FACTORY FOR CUSTOM LENGTHS
8. GASKET MATERIALS
PROCESS FLUID
VISIBLE RANGE
CENTERS
FLEXITALLIC "CGI" (OR EQUAL) SPIRAL-WOUND (STANDARD) W/ CS OUTER RING, 304 OR 316SS INNER RING, & GRAPHITE FILLER
CONSULT FACTORY FOR OPTIONAL GASKET MATERIALS 9. PROCESS CONNECTIONS
½” [15] THRU 1” [25] FSW & MSW (STANDARD) 1 ½” [40] THRU 6” [150] FSW & MSW AVAILABLE ON REQUEST
OVERALL LENGTH (SEE GENERAL NOTE 1)
2.5" [64] FOR 1/2" FSW 2.563" [65] FOR 3/4" FSW 2.813" [71] FOR 1" FSW
(REQUIRE FITTINGS THAT INCREASE SECTION A-A DIMENSION SHOWN)
(2) SIDE CONNECTIONS (STANDARD) (2+) SIDE CONNECTIONS AVAILABLE ON REQUEST
4.188" [106] FOR 1/2" MSW 4.188" [106] FOR 3/4" MSW 4.375" [111] FOR 1" MSW (SEE GENERAL NOTE 9)
A
10.5" [267]
A
10. VENT / DRAIN CONNECTIONS
0°
½” [15] FNPT (SHOWN) (STANDARD) ½” [15] THRU 1 ½” [40] FNPT, MNPT, FSW, & MSW ½” [15] TO 3” [80] RAISED-FACE ANSI/ASME & DIN FLANGED
4
FLOAT
11. INDICATION
YELLOW / BLACK FLAGS IN ALUMINUM HOUSING (SHOWN) (STANDARD)
NIGHTSTAR™ (ILLUMINATED FLAGS) (120 OR 240 VAC) (BULLETIN M100.140) LEVELSTAR™ (LED ILLUMINATOR) (120 OR 240 VAC) (BULLETIN M100.120)
11
FLOAT LENGTH (SEE GENERAL NOTE 7)
12
0 0
2 1/2" [65] SCH. 40 MAGNICATOR STANDPIPE (SEE GENERAL NOTE 4) 180°
METER / CENTIMETER PERCENT
13
CONSULT FACTORY FOR SPECIAL SCALES
2
SAS-16 TRI-MAGNET (BULLETIN M100.27) RS-2 (SPDT) HERMETICALLY-SEALED REED (BULLETIN M100.20) RS-2/2 (DPDT) HERMETICALLY-SEALED REED (BULLETIN M100.20) GUIDED WAVE RADAR MTII-4200 MAGNETOSTRICTIVE (BULLETIN M100.23) RST2 REED SWITCH (BULLETIN M100.22)
14
NOTE: AS STANDARD, PROCESS CONNECTIONS WILL BE ORIENTED AT 0°. THEY ARE SHOWN IN THIS DRAWING AT 90° FOR EASE OF VIEWING.
INDICATOR (SEE GENERAL NOTES 11 & 12)
3" [80] SCH. 40 BY-PASS STANDPIPE
SECTION A-A
9
MANUFACTURED BY
14. 4-20mA TRANSMITTERS
0 0 0
PROCESS CONNECTION (SEE NOTE BELOW)
FEET / INCHES (SHOWN) (STANDARD)
13. POINT LEVEL SWITCHES
0
90°
8" [203]
HERMETICALLY-SEALED FLAGS IN GLASS TUBE W/ 316SS FRAME (BULLETIN M100.110)
12. SCALES
270°
HERMETICALLY-SEALED FLAGS IN POLYCARBONATE TUBE W/ 316SS FRAME (BULLETIN M100.110)
3
5
6
7
Clark·Reliance
®
16633 FOLTZ PARKWAY STRONGSVILLE, OH 44149 USA (440) 572-1500 | www.clarkreliance.com © Clark-Reliance® Corporation. All Rights Reserved.
JERGUSON
MODEL MGWR-ESW MAGNICATOR II COUPLED WITH BY-PASS CHAMBER FOR GUIDED WAVE RADAR TRANSMITTER (W/ 600-2500# ANSI/ASME FLANGES)
DRAWN:
SSF
CHECKED:
MK
DATE:
1/22/2014
REVISION:
1
DRAWING NO.:
MGWR-ESW6
REV.:
1