Transcript
BITWIG SETUP GUIDE v 1.0
BITWIG SETUP GUIDE RELOOP – KEYPAD
IMPORTANT NOTE For the script to work, you need to set the KeyPad to Preset 2 by unplugging the USB cable and then holding Pad 2 while plugging the USB cable back in. To set the controller to use external sync for the arpeggiator and run in sync with Bitwig Studio, unplug the USB cable, then hold down the ARP button while plugging the cable back in. Now channel buttons 1 and 8 (S A1 + A8) should light up. Press channel button 8 (S A8) for external sync.
GLOBAL S A1-A8
Mute Track.
S B1-B8
Solo Track.
S C1-C8
Arm Track.
S C4 + Shift
Toggle Loop.
S C5 + Shift
Tap Tempo.
S C6 + Shift
Toggle Metronome.
S A1-A8 + Shift
Launch Scene.
Octave up/down + Shift
Scroll scenes up/down.
Play
Toggle transport play/pause.
Stop
Transport stop/go to start.
Record
Toggle transport record.
Stop + Shift
Stop all clips.
Record + Shift
Toggle record overdub.
SCENE 1/MIX MODE E 1-8
Track Pan.
K A1-A8
Track Send 1.
K B1-B8
Track Send 2.
F 1-8
Track Volume.
S C7 / C8
Scroll Track Bank up/down.
SCENE 2/DEVICE MODE E 1-8
Device: Macros.
K A1-A8
Device: Common parameters.
K B1-B8
Device: User parameters.
F 1-8
Device: Envelope parameters.
S C1 + Shift
Device: Next user parameter page.
S C2 + C3 + Shift
Select previous/next cursor device.
S C7 + C8 + Shift
Select previous/next cursor track.
v 1.0
BITWIG SETUP GUIDE RELOOP – KEYFADR
IMPORTANT NOTE For the script to work, you need to set the KeyPad to Preset 2 by unplugging the USB cable and then holding channel button 2 (S A2) while plugging the USB cable back in. To set the controller to use external sync for the arpeggiator and run in sync with Bitwig Studio, unplug the USB cable, then hold down the ARP button while plugging the cable back in. Now channel buttons 1 and 8 (S A1 + A8) should light up. Press channel button 8 (S A8) for external sync.
GLOBAL S A1-A8
Mute Track.
S B1-B8
Solo Track.
S C1-C8
Arm Track.
S C4 + Shift
Toggle Loop.
S C5 + Shift
Tap Tempo.
S C6 + Shift
Toggle Metronome.
S A1-A8 + Shift
Launch Scene.
Octave up/down + Shift
Scroll scenes up/down.
Play
Toggle transport play/pause.
Stop
Transport stop/go to start.
Record
Toggle transport record.
Stop + Shift
Stop all clips.
Record + Shift
Toggle record overdub.
SCENE 1/MIX MODE E 1-8
Track Pan.
K A1-A8
Track Send 1.
K B1-B8
Track Send 2.
F 1-8
Track Volume.
S C7 / C8
Scroll Track Bank up/down.
SCENE 2/DEVICE MODE E 1-8
Device: Macros.
K A1-A8
Device: Common parameters.
K B1-B8
Device: User parameters.
F 1-8
Device: Envelope parameters.
S C1 + Shift
Device: Next user parameter page.
S C2 + C3 + Shift
Select previous/next cursor device.
S C7 + C8 + Shift
Select previous/next cursor track.
v 1.0
