Transcript
Blade Series Dual-technology and IR detectors for windows, doors, shutters and roll-up shutters.
Created with passion, precise by definition.
elmospa.com Global Security Solutions
Created with passion, precise by definition Blade Series includes two high-performance dual-technology volumetric detectors and one IR wireless detector designed for active protection of windows and French-windows thanks to their compact and precise curtain coverage featuring 4m range max. Blade sensors detection angle has been especially realized to protect the areas that really need to be protected: its beams will not fall outside such areas and consequently will not cause false alarms. The reduced dimensions and low-profile of BLADE and BLADERF (both in white and brown version) detectors allow both vertical and horizontal installations: vertically along windows/doors sides, horizontally above windows/doors top side, and also centrally if using BLADEC. The special shape of the housing of BLADE and BLADERF detectors facilitates the double type of mounting between shutters/roll-up shutters and windows/doors: the housing has a special area for cables at the base and is equipped with insulation gaskets in case of cables input from the housing side.
a 24GHz microwave section equipped with a reduced-dimension planar antenna. The detection sections are highly immune to external disturbances thanks to a complete equipment: FRESNEL lens, silica filter for white light protection, filter against NEON light, and temperature automatic compensation. BLADE and BLADERF dual-technology detectors feature an active antiblinding function and also the DAM (Double Anti Mask) function that ensures detection of sensors’ far and near masking, detecting movements at the same time. Blade completes with a high-sensitivity accelerometric sensor operating on two axis and detecting possible disorientation actions against the detector. BLADE and BLADEC dual-technology detectors have been designed to ensure quick and easy maintenance: a special input allows to test the detector remotely with the activation of the alarm and fault relay without acting on the detector housing.
The Blade series is the result of a precise technological idea that combines aesthetic forms and performing and reliable detection features by adopting a digital passive IR sensor and, for BLADE and BLADERF detectors, also
BLADERF wireless IR detector integrates terminal inputs for the connection and management of a magnetic contact with tamper protection and a roll-up shutter detector ensuring a three-level wireless perimeter protection: IR + Magnetic contact + Roll-up shutter detector.
BLADE and BLADEC dual-technology detectors main features
BLADERF Wireless IR detector main features
»» Dual technology detector (MW+IR) with curtain coverage »» High-performance miniature wireless IR detector »» Horizontal/vertical installation between doors/windows and shutters/roll- »» Terminal inputs for the connection of a magnetic contact with tamper up shutters
protection and a roll-up shutter
»» Pulsed 24GHz miniature MW section with filter against NEON lights »» Horizontal/vertical installation between doors/windows and shutters/rollup shutters »» Digital PIR section highly immune to RFs with temperature automatic compensation »» Digital PIR section highly immune to RFs with temperature automatic compensation »» Silica filter for white light protection »» Anti-blinding active on IR section and DAM (Double Anti Mask) with »» Silica filter for white light protection output to specific solid-state relay »» Transmissions of alarms, tamper events, magnetic contact alarms, rollup shutters alarms and supervision events »» Anti-disorientation protection with output to 24H relay »» Designed to realize an effective three-level wireless perimeter protection: »» Intrusion alarm output to specific solid-state relay IR + Magnetic contact + Roll-up shutter detector. »» 3 LED indicators (excludable) » » Sensitivity adjustable »» Tamper protection against opening » » Blue LED indicator »» Voltage automatic control » » Tamper protection against opening »» Coverage angle: 80° horizontal, 15° vertical » » Coverage angle: 90° horizontal, 15° vertical »» Range max 4m (BLADE) 3m (BLADEC) » » Range max 4m »» Detector remote test input » » Walk-Test for faster test of correct working mode »» BLADE abailable in white version (BLADE) or brown (BLADEM) » » BLADERF available in white version (BLADERF) or brown (BLADERFM) »» Dimensions W35 x H96 x D33mm » » Dimensions W35 x H96 x D33mm »» Power supply DC12V » » Power supplied by 1/AA 3,6V Lithium battery (supplied) »» Power consumption 19mA (idle state) » » Power consumption 28 μA (idle state) »» Compliant with EN50131-2-4, EN50130-4, EN61000-6-3 and EN60950»» Compliant with EN50131-2-4, EN50130-4, EN61000-6-3 and EN609501 Standards 1 standards
elmospa.com
BLADE/BLADEM and BLADERF/BLADERFM horizontal installation
BLADE/BLADEM and BLADERF/BLADERFM vertical installation
Central BLADEC mounting
Blade sensors installed horizontally, vertically or in centred positions with IR beam vertical aperture of only 15 degrees ensure extreme precision in protecting only the areas that really need to be protected: the beam will not fall outside such areas and consequently will not cause false alarms.
Technical profile Model
Stock code
Level of performance EN 50131 Consumption: At rest In alarm Anti-blinding/fault Timings: Alarm or circuit against disorientation Stand by power Reaction time remote test Relay reaction time for remote test Reset time from remote test General Operating temperature Dimensions Weight Power supply MW Interference suppression filter Integration Coverage area Range TX frequency Timings Emitted power Emitted signal IR Lens type Sensitive zones Coverage area Range PIR sensor Timings
BLADE
RCRDTMP01000 (BLADE) RCRDTMP02000 (BLADEM)
BLADEC
RCRDTMP01500
I° (ref. CEI 79-2) Level 2, environmental class II 19mA (exited state relay) 40mA (non-exited state relay) 30mA 5sec. 20sec. 5sec. 3sec. (Alarm OK, Fault OK) 1sec. after relay impulse -10°C / +55°C W35 x H96 x D33mm 68 g DC12V for neon lamps Fixed from 2 impulses 80° (vertical), 30° (horizontal) max. 4 mt 24GHz Alarm with IR section wait for 3sec. 16 dBm Pulsed Vertical curtain lens with protection white light filter through Silicon on PIR sensor 2 beams 80° (horizontal), 15° (vertical) max. 4 mt (BLADE) max. 3 mt (BLADEC) Digital immune to RF interference Alarm with MW section wait for 3 sec.
Model
Stock code
Level of performance EN 50131 Consumption: At rest IR alarm, open magnetic contact and roll-up shutter sensor Stabilizer Timings: First power up Walk-Test time Wait time between first IR pulse and second IR pulse IR Inhibition time in Walk-Test after alarm transmission Alarm from roll-up shutter input Supervision time General Operating temperature Dimensions Weight Power supply IR Lens type Sensitive zones Coverage area Range PIR sensor IR gain
Intrusion Detection Line
BLADERF
RWRIRMP00300 (BLADERF) RWRIRMP01000 (BLADERFM)
I° (ref. CEI 79-2) Level 1 28 μA 16 mA 120 μA 10s with disabling the IR section On the first lighting with a duration of 5 min reset from the first movement of the useful magnetic contact or the rollshutter. 10 s 3s 5 impulses in 15 s Transmission every 26 min -10°C / +55°C W35 x H96 x D33mm 65 g from battery, Max 2,5 years life Vertical curtain lens with protection white light filter through Silicon on PIR sensor 2 beams 80° (horizontal), 15° (vertical) max. 4 mt Digital immune to RF interference Optimized with the temperature
elmospa.com
[email protected] Detectors building details
Silica filter with white light protection, filter against neon light, automatic compensation of temperature, 3 LED indicators for alarm and fault conditions signalling.
Cables path and insulation gaskets with side input for easy installation.
Detection sections highly immune to external disturbances thanks to the sectors FRESNEL lens.
Products features as described above do not bind the manufecturer and may be modified without prior notice
Terminal board with sensor remote test input and solid-state relay outputs for alarm, tamper, disorientation, fault, and masking.
Strong points: Features
Advantages Detects PIR lens blinding attempts
Anti-masking function
Detects sensor masking attempts
Look-down function
Detects intrusion attempts in the area below the sensor
Faults supervision
Automatic detection of low-voltage or PIR fault
Sensitivity selectable
High security and false alarms reduction
LED Indicators
For easier range tests of all technologies
Environment temperature compensation
For PIR section detection also with critical temperature
Fluorescent light rejection
Avoids false alarms in case of neon light
Anti-dazzle protection
Avoids false alarms due to incandescent lamps dazzling
Remote test
For remote monitoring of all sensor functions
EN501312-4 for level 2
BLADE sensor is fully compliant
Stamp dealer
D.30.0814.2
Anti-blinding function
Global Security Solutions
EL.MO. S.p.a. Via Pontarola, 70 IT - 35011 Campodarsego
Tel.+39.049.9203333 Fax +39.049.9200306
