Transcript
Blender User Manual
Model No.: FTBL2013 *Before operating the appliance, please read this manual thoroughly and retain it for future reference.
1
CONTENT
PAGE
SAFETY INSTRUCTION
3
PARTS DESCRIPTION
4
OPERATION INSTRUCTION
5
MAINTENANCE INSTRUCTION
8
TROUBLE SHOOTING
8
SPECIFICATION
8
WARRANTY
9
2
SAFETY INSTRUCTION 1. To avoid electric shock, fire or injury, please read the user manual carefully before using the appliance and keep it for future reference.
2. 3. 4. 5. 6. 7. 8.
This appliance is for household use only. Please use suitable power source (220-240V~, 50/60Hz). Never immerse the appliance in water or other liquids. Do not use the appliance under direct sunshine. Please turn off the appliance when not in use otherwise it may result in danger. Please turn off the appliance and unplug the socket when unattended otherwise it may result in danger. Keep the appliance away from children. The appliance is not intended for used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
9. Children should be supervised to ensure that they do not play with the appliance. 10. With any indication of malfunction (including power cord), please stop using the appliance immediately to avoid hazard. Take it to the authorized service center for repair. Do not attempt to repair or change any parts by yourself.
11. Please turn off and unplug the appliance before cleaning or maintenance. 12. Clean the surface of the appliance with a dry cloth. Do not use corrosive detergent or solvent to clean. Do not swash the appliance with water.
13. Please turn off and unplug the appliance when not in use. Make sure the power is off before pulling out the plug and do not pull the cord.
14. When the appliance is not in use for a prolonged period, please turn it off, unplug it, pack it well, and store it in dry cool place.
15. Forbid to put flammable and explosive objects around the appliance, and do not use the appliance in an environment full of flammable gas and powder. Keep away from any fire and heat sources.
16. 17. 18. 19.
Please put the power cord in the right place in order to avoid tripping the appliance over. Please operate the appliance on a firm and level desk or floor. Please be careful when handling the sharp cutting blades, emptying the glass jar and during cleaning. Always disconnect the appliance from the supply if it is left unattended, before assembling, disassembling or cleaning.
20. Do not allow children to use the appliance without supervision. 21. Please switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
3
PARTS DESCRIPTION 1. Measuring cup 1
2.
Lid
2
3. Glass jar
3
4
4.
Blending blade
5.
Control panel 5
6.
Motor unit
7.
Miller
6
7
8.
Sealing ring
8
9.
Miller blade
9
Measuring cup Allow you to add ingredients without removing the lid. Turn anti-clockwise to open. Speed control with pulse switch Speed control gives maximum (speed 2) and minimum (speed 1) rotating speed, and pulse switch (T) to blend different food.
4
Ice crush button Ice crush button is preset to the best speed for crushing ice. Control panel A. Speed control:
OFF
1
Speed 1 (Minimum speed)
2
Speed 2 (Maximum speed)
T
Pulse switch
B. Ice crush button
OPERATION INSTRUCTION Before first use
Unpack the blender.
Place the blender on a flat surface.
Clean the blender with a dry cloth, never immerse it in water or place it under running water.
Wash the glass jar, lid and blades in warm water. Rinse and dry thoroughly.
Caution: Wash with care. The blades are very sharp. Never touch the blades with your finger.
Assemble the Appliance A.
Blender assemble
1.
Please check the blending blade carefully before using the blender every time.
2.
Insert the blending blade into the glass jar. To lock the blending blade, turn it in anti-clockwise direction. To release the blending blade, turn it in clockwise direction.
3.
Place the glass jar onto the motor unit. Make sure the arrow (▼) at the bottom of the glass jar is in line with the unlock symbol (
). Lock the glass jar by turning it clockwise to the lock symbol (
motor unit. To release the glass jar, turn it anti-clockwise to the unlock symbol (
Note: Please ensure the glass jar is in position tightly.
5
).
) on the
B.
Miller Assemble
1.
Please check the milling blade carefully before using the miller every time.
2.
Insert the milling blade into the miller. To lock the milling blade, turn it in anti-clockwise direction. To release the milling blade, turn it in clockwise direction.
3.
Place the miller onto the motor unit. Make sure the arrow (▼) at the bottom of the miller is in line with the unlock symbol (
). Lock the miller by turning it clockwise to the lock symbol (
release the miller, turn it anti-clockwise to the unlock symbol (
) on the motor unit. To
).
The maximum operation level is
!
1.5L. Do not blend more than 1.5L
!
Do not remove the lid from the
ingredients.
glass jar while the blender is on.
Operation Note A.
Blender
1.
Assemble the glass jar.
2.
Plug the appliance into a socket.
3.
Add ingredients into the glass jar, cover the glass jar with the lid.
4.
Turn the speed control to the desired speed. T – Pulse switch
Stop the blender before adding new
!
Speed 1 – minimum speed
ingredients or use the measuring cup to add ingredients.
Speed 2 – maximum speed
5.
See the table of suggested speed for the blender.
6.
To stop the operation, turn the speed control to off.
7.
Wait until the motor stops completely, remove the glass jar from the motor unit.
8.
Unplug the appliance after use.
* Ice crush 1.
Fill in a maximum quantity of 10 normal ice cubes, and close the glass jar with the lid and the measuring cup.
2.
Rotate the speed control to speed 1. As soon as the blender runs, press the ice crush button repeatedly (be sure not to hold the button for more than 3 seconds) until the ice cubes are crushed. (maximum 60
seconds)
6
B. Miller The miller is designed for milling solid ingredients such as grains, beans, and etc. 1.
Place the food in the miller. (maximum 1/2 miller)
2.
Place the sealing ring onto the milling blade.
3.
Place the milling blade into the miller and turn the milling blade in anti-clockwise direction to lock it.
4.
Turn the miller upside down and place it on the motor unit and lock the miller by turning it in clockwise direction.
5.
Plug the appliance into a socket.
6.
Turn the speed control to the desired speed. T – Pulse switch
Speed 1 – minimum speed
Speed 2 – maximum speed
7.
To stop the operation, turn the speed control to off
8.
Wait until the motor stops completely, remove the miller from the motor unit.
9.
Unplug the appliance after use.
Caution:
Do not place the milling blade on the motor unit before installing into the miller.
Avoid touching the sharp blades.
Never touch the rotating parts which are still in motion.
Switch off the appliance before changing accessories or approaching parts that move in use.
Place the motor unit on a flat surface.
Enusre the speed control is turned to off.
Table of Suggested Speed for the Blender Speed 2 2 2 2 1 + Ice Crush
Maximum
Recommended application
operation time
Blending carrot/water with rough pieces for sauces with no more than 1.5L Blending instant juices, soft fruit and cocktails with alcohol with no more than 1L Blending soup, milkshakes with hard fruit with no more than 1L Making sauces, baby food, blending hard fruits or vegetables with no more than 1L Crushing ice cubes with maximum 80-100g each time
120s 60s 60s 60s 60s
Table of Suggested Speed for the Miller Speed
Maximum
Recommended application
operation time
2
Chopping hard cheese, dry bread….. 100g
10s
2
Chopping soybean….. 240g
10s
Note: After every maximum operation time, please let the appliance cool down to room temperature before continue operating the appliance again.
7
MAINTENANCE INSTRUCTION Note: Switch off and unplug the appliance before cleaning and maintenance. To maintain the blender in the best quality, always clean the glass jar every time after use. 1.
Unplug the blender.
2.
Clean the glass jar and other accessories with warm soapy
Handle the glass jar with care.
water and dry thoroughly.
The blades are very sharp. Wash
3.
Clean the motor unit with a dry cloth, never immerse it in water or place it under running water.
4.
!
them with care. Never touch the blades with your fingers.
Place the blender in a safe place.
Tips of using the blender
Do not blend dry, thick or heavy mixtures for more than 60 seconds continuously. Let the appliance cool down to room temperature before continue operating the appliance again.
Do not place the lid into a dishwasher or boiling water, the lid may deform.
Always hold the edge of the lid while operating the blender.
TROUBLE SHOOTING
The blender is not working -
Check the plug if it is in its socket and the switch is in the ‘on’ position.
-
The removable blender accessories are not assembled correctly. Unscrew and re-assemble the accessories.
The blender gets very hot after maximum speed operation The blender has been used for a long time continuously. Let the blender cool down to room temperature before using it again.
Bad smell The machine oil on the motor may cause smell in first few use.
SPECIFICATION Model No.
FTBL2013
Product name
Blender
Rated Voltage/Frequency
AC 220V-240V~ 50/60Hz
Rated Power
1000W
Dimension (LxWxH)
180x180x387 mm
8
WARRANTY 1.
The product has 2 years warranty from the date of purchase.
2.
The warranty shall not apply: A.
to any product subjected to misuse, alteration, act of God, improper handling, improper transport, improper testing or unauthorized repair;
B.
to cosmetic problems or defects which result from normal wear and tear under ordinary use yet not affecting the performance or use of the product;
3.
C.
if the product is disassembled or altered;
D.
to any packing, transportation, export / import tax or any related expenses.
CUSTOMER MUST PRESENT THE SALES INVOICE OR RECEIPT FOR 2 YEARS WARRANTY SERVICES.
4.
Please bring along the product and sales invoice or receipt to our services center for warranty services during office hour: Address
:
Unit A, 20/F, Yip Shing Industrial Centre, No.19, Yip Shing Street, Kwai Chung.
Service Hotline
:
(852) 2428 1500
Monday-Friday
:
9:00am - 6:00pm
Saturday
:
9:00am - 4:00pm
Sunday & Public Holiday
:
Closed
Service Hours:
5. To prevent circuit overload and fire, no more than one adaptor or one extension unit should be inserted into a socket outlet. (Do not connect other appliances to the socket outlet supplying an electric heater.) No adaptor should be inserted into any extension unit or vice versa. 6.
Stop using an adaptor or an extension unit or a socket if its socket holes cannot firmly hold a plug if it is too hard to insert a plug into it.
7.
This appliance must be plugged into a specific 220V socket provided. Please make sure the plug is fully plugged-in before use. Do not use any adapter or extension cord; Never use the same supply socket for this appliance and other appliances at the same time, in order to avoid damage to this appliance.
8.
THE APPLIANCE IS FOR HOUSEHOLD USE ONLY.
ENVIRONMENT Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help preserving the environment. IMPORTANT NOTICES IN NO EVENT SHALL OUR COMPANY OR THE SUPPLIER BE LIABLE TO YOU OR ANY OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR INJURY, LOSS OF PROPERTY, BUSINESS PROFITS, BUSINESS INTERRUPTION) OR FROM ANY BREACH OF WARRANTY, EVEN IF OUR COMPANY OR SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO CASE SHALL OUR COMPANY OR SUPPLIER’S LIABILITY EXCEED THE AMOUNT YOU PAID FOR THE PRODUCT.
Specifications, designs and dimensions are subject to change without prior notice. 9
