Transcript
QUICK START GUIDE Model: BlueROCK 2
The BlueROCK 2 Bluetooth speaker features high definition sound with a built in microphone for easy hands-free calling. Simply pair your handheld device with the BlueROCK 2 to easily answer phone calls while enjoying your favorite music. Includes: • 1 x BlueROCK 2 • 1 x Charging Cable • 1 x Line In Audio Cable Speaker Controls (Bluetooth Only) Push Once: Previous Song Push and Hold: Volume Down
Play / Pause Answer / End Call
Push Once: Next Song
Push and Hold: Volume Up Charging the Battery Before first use follow these instructions to fully charge the BlueROCK 2: 1. Move the “On / Off” switch to the “Off” position. 2. Plug the provided USB charging cable into the speaker and a powered USB port. While charging, the indicator LED light will be red. Once fully charged, the red LED will turn off.
Playing Music with a Bluetooth Connection 1. Move the “On / Off” switch to the “On” position. 2. The BlueROCK 2 will make a loud beep and the LED indicator light will flash, indicating that the speaker is in pairing mode. If a device is not connected after 30 seconds, the speaker will switch to sleep mode. Turn the speaker off and then on again to re-enter pairing mode. 3. On your mobile device: Turn Bluetooth on, search for Bluetooth devices, and select the speaker. 4. If you are prompted to enter a password to complete pairing, enter 0000. The BlueROCK 2 will beep, indicating that it has successfully paired with your device and is ready for use. Note: If the BlueROCK 2 is moved out of range or runs out of power and drops the connection to your portable device, then you will need to recharge or move the BlueROCK 2 closer to your portable device and return to step 1 above to re-establish the Bluetooth connection. Playing Music with a Line In Connection 1. Move the “On / Off” switch to the “Off” position. 2. Plug the provided audio cable into the BlueROCK 2 and then into your portable device. 3. Move the “On / Off” switch to the “On” position. The BlueROCK 2 is now ready for use.
Answering a Call with the BlueROCK 2 1. Establish a Bluetooth connection between your device and the BlueROCK 2 as described in the section above “Playing Music with a Bluetooth Connection.” 2. To answer an incoming call press the Play / Pause button once. 3. To end a call press the Play / Pause button again. Specifications • Battery Voltage: 3.7 V • Battery Capacity: 400 mAh • Recharging Voltage: 5 V • Horn Specifications: 40mm 2.6Ω 3W • Frequency Response: 60Hz – 18KHz • Wireless Range: up to 10M • Bluetooth 2.1 + EDR Compliant • Supports A2DP and AVRCP Profiles • SNR (Signal to Noise Ratio): ≥ 95 dB • Distortion: ≤ 0.5% • Play Time: 6 – 7 hours • Recharge Time: 2 – 3 hours • Dimensions: 60*60*50mm
