Transcript
WHAT’S IN
Bluetooth Headphone USER GUIDE
THE
MEET YOUR BLUETOOTH HEADPHONE
BOX ?…
A. TechMatte Bluetooth Headphone B. Charging Cable C. EarBud Tips D. Earhooks E. User Guide
L
R
C B
A
A
D
B E F
Bluetooth Headphone USER GUIDE
A Micro-USB B LED indicator D
CSR DPS V4.1 Top chip
Extraordinary noise reduction
Bluetooth
HD HD Audio
12 HD microphone
Replay of the end
One to two
Power display
Volume adjustment
H
Song switching
C MFB (Multi Function Button) D Volume up E Volume down
CSR DPS Top chip
Extraordinary noise reduction
V4.1
HD
Bluetooth
HD Audio
1 2 HD microphone
Replay of the end
One to two
Power display
Volume adjustment
F Microphone
H
FUNCTION BUTTONS
Bluetooth Version
Bluetooth V4.1
Bluetooth Profile
HFFP 1.6, HSP 1.2, AVRCP 1.4, A2DP 1.2
Range
33 feet (10m)
Noise Reduction
CVC Noise Suppression
Working/Standby Time
About 5 hours working & 170 hours standby
Charging Time
2 hours
Dimensions
39.8*22.3*28.2mm
Weight
16g
Function
CHARGING (1) Insert the mirco-USB end of the charging cable into the charging port of the headset. (2) Plug the USB end of the charging cable into any USB power source. (3) The LED will turn red when charging, or blue when fully charged
BLUETOOTH PAIRING
To connect the headset to your cell phone, you must first bring it into pairing mode. (1) Please turn off other Bluetooth devices nearby, and make sure the headset and your Bluetooth device are close together (3ft) (2) The first time you use the headset, press and hold the Multifunction Button for 5 seconds until the LED indicator flashes red and blue alternately. Now the headset is in pairing mode. (3) Activate the Bluetooth function on your phone and search for the nearby Bluetooth connection •For iPhone: Settings>Bluetooth>On •For Android: Settings>Wireless & Networks> Bluetooth: On> Scan for devices (4) TM-101 should be listed in the search results. Select the name to connect. Once connected, only the blue LED will remain on.
Note: •The Bluetooth headset can remember previously paired devices. If you have previously paired the headset with a device, simply turn on your device and the headset (by pressing the Multifunction Button for 1 seconds) will automatically connect without going into pairing mode. •If you want to pair the headset with another device, you need to press and hold the Multifunction Button for 5 seconds when the device is powered off. The LED indicator will then flash red and blue alternately. After that you can pair with your device by following the “Bluetooth Pairing” Instructions.
LED Indicator Indicator turns blue when turned on, then flashes red and blue alternately during paring
Power OFF
Press and hold the Multifunction Button for 5 Seconds
Indicator turns red and then shuts off
Play/Pause
Press the Multifunction Button once
Answer Phone Call
Status
LED indicator is solid red
Charging
LED indicator is solid blue
Fully Charged
LED indicator flashes red and blue alternately
In pairing mode
LED indicator flashes blue once every 7 seconds
Paired
Note: The unit will not automatically connect to a Bluetooth device when switched on.
Song switching
HOW TO USE ?
Operation Press and hold the Multifunction Button for 1 Second to power on, hold for 5 second for paring
Power ON
** LED Indicators: The LED indicator gives a good indication of what the headset is doing. LED Indicator
E
C
SPECIFICATIONS
ARE YOU 100% SATISFIED ??
Hang Up
Press and hold the Multifunction Button for 1 second
Redial
Indicator flashes blue Press the Multifunction Button once every 7 seconds Twice to redial the last phone number
Volume +/-
Press the +/- button
Play Next/Previous
Press and hold the +/- button for 1 second
Mute The Call
Press + and – button once simultaneously
Restore factory settings
At charging status, Press and hold the Multifunction Button for five seconds
Indicator flashes red for three times
WARRANTY
PAIRING TWO DEVICES AT THE SAME TIME
Although you can pair two devices, only one of them can play music with the headset at a time. To pair two devices: (1) Follow the “Bluetooth Pairing” instructions to pair the TM-101 with your first device (2) Turn OFF your first Device, follow the “Bluetooth Pairing” instructions to pair and connect your second device with the TM-101 (3) Turn on the Bluetooth of your first device and select TM-101 on your phone, now both devices are paired with the TM-101 headset.
Note: •To switch between the two devices, simply pause the music on the first device and play music on the second device or vice versa.
Care and Maintenance •Keep the headset away from heat and humidity. •Do not put the product under direct sunlight or hot areas. High Temperatures will shorten lifespan of the headset, battery, and/or the internal circuit board. •Do not try to take the product apart. It may cause serious damage. •Do not drop or knock your headset on hard surfaces as it damages the interior circuit. •Do not use the chemicals or detergents to clean the product. •Do not scrape the surface with sharp objects
Trouble Shooting Q: It won’t turn on A: Make sure the battery is fully charged Q: It is not charging A: The charging port is not properly connected. Try re-plugging in the power cable. Q: It won’t turn off A: Use the charger to charge and rest the headset Q: The headset cannot be searched or pairing fails. A: Close the cell phone and start again to pair the cell phone with the headset.
WRITE A REVIEW ONLINE
Share your great experience with others by using the link below to help navigate to your order. amazon.com/review/review-your-purchase CONTACT US
If for any reason at all you are not fully satisfied with this product or our service, we are more than happy to help! Before contacting the retailer or posting negative feedback, please email our TechMatte Customer Support Team at
[email protected]. We always provide around-the-clock support and promise to provide prompt, helpful assistance, send out replacements and even assist with returns and/or refunds.
For twelve (12) months following the original date of purchase, you can contact TechMatte for any quality-related issues and we will provide a free replacement for the product. At our discretion we will even offer to cover the shipping cost to get the free replacement to you. TechMatte does reserve the right to request damaged/unusable items to be returned to us for verification and improvement purposes. The responsibility of shipping fees and other expenses for these types of instances will be handled at the discretion of TechMatte and on a case-by-case circumstance.
