Transcript
JABRA BT2047
DATASHEET
Bluetooth® Mono Headset Compatible with any Bluetooth enabled device
BLUETOOTH HEADSET FOR MOBILE DEVICES EASY TO USE Pair it easily with any Bluetooth device. A single userfriendly button lets you turn the headset on/off, initiate pairing, and control your calls without having to touch your phone. Depending on your preference, you can easily remove or flip the EarHook™ to fit either ear. CONNECT TO 2 DEVICES SIMULTANEOUSLY Connect to two separate devices at the same time. When one of them rings, the headset will automatically stream the right call when you answer. If a new call comes through on the other phone, you’ll get an alert and the option to pick it up. CLEAR CALLS Get crystal-clear calls on both ends of the line. Omnidirectional mic transmits your voice while reducing background noise, so that the other party hears you clearly.
REASONS TO CHOOSE THE JABRA BT2047 Easy to use Connects to 2 devices simultaneously Clear calls
JABRA.COM/BT2047
THE BLUETOOTH® WORD MARK AND LOGOS ARE OWNED BY THE BLUETOOTH SIG, INC. AND ANY USE OF SUCH MARKS BY GN NETCOM A/S IS UNDER LICENSE. (DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE)
BLUETOOTH HEADSET FOR MOBILE DEVICES
QUICK START GUIDE - GET STARTED UNDER 5 MINUTES
1 CONNECTING
2 WEARING
CONNECTING WITH A BLUETOOTH DEVICE 1. Turn the headset on (press the answer/end button for 2 sec.). When you turn on your Jabra BT2047 for the first time, the headset will automatically start up in pairing mode – i.e. it is discoverable for your phone. When the headset is in pairing mode the LED is constantly lit. 2. Set your phone to ‘discover’ the Jabra BT2047. Follow your device’s instruction guide. Make sure that Bluetooth is activated. 3. Your device will find the headset under name “BT2047” The device then asks if you want to pair with the headset. Accept by pressing ‘Yes’ or ‘OK’ on the device and confirm with the passkey or PIN = 0000 (4 zeros) if asked. Your device will confirm when pairing is complete.
The headset can be worn with or without the earhook.
ATTACHING THE EARHOOK The earhook can be attached to the headset for the perfect fit.
Put the headset in pairing mode manually In case of unsuccessful pairing, put the Jabra BT2047 into pairing mode manually. Make sure the headset is off. Press and hold the answer/end button for approximately 5 seconds until the LED has a constant light. The LED will flash before the light is constant – keep holding down the button until light is constant. Then follow the steps 2 and 3 above.
3 USING Charging socket
Answer/end + On/off button LED light
Turn the headset on
Press (2 Sec.) the answer/end button
Turn the headset off
Long press (5 Sec.) the answer/end button
Answer/end call
Tap the answer/end button
Reject call
Press (2 Sec.) the answer/end button
Redial last number*
Double-tap the answer/end button Press (2 Sec.) the answer/end button once to put the active call on hold and answer the waiting call
EarGelTM
EarHookTM
Call waiting and placing a call on hold*
Press (2 Sec.) the answer/end button to switch between the two calls Tap the answer/end button to end the active conversation
It takes approx. 2 hours to fully charge the battery
FEATURES AND SPECIFICATIONS Clear calls – Omnidirectional microphone transmits your voice while reducing background noise Easy to use – a single user-friendly button lets you turn the headset on/off, initiate pairing, and control your calls MultiuseTM – connects to 2 devices simultaneously Up to 10 hours talk time and up to 10 days standby time In the box: 1 Jabra BT2047, 1 USB cable, 1 EarHookTM, 2 EarGels™, 1 Quick Start Guide Weighs only 10g (0,34 oz) L53 mm x W16 mm x D25 mm (L2.1 x W0.6 x H1.0 in) * Device and network dependent
JABRA.COM/BT2047
DATASHEET_EMEA-APAC_JABRA_BT2047_02/16
