Transcript
FLAIR bluetooth SPEAKER
All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their use does not imply that the trademark owner is affiliated with KitSound or endorses the products herein. JB. 4115 / Made in China. © KitSound™ 2015. Christchurch, Dorset, BH23 4FL, UK
User Manual
We are craftspeople. We are musicians. We are KitSound™ And we all commit ourselves to achieving one shared goal: Bringing people closer to their music. By truly understanding music we stay true to its craft. Pure, rich, incredible sound. We’ll settle for nothing less.
At KS we believe your music deserves to be showcased on great quality products that don’t cost the earth. We might not all share the same taste in music (the ferocious disputes on music forums prove that), but whether it’s Irish folk, death metal or any number of obscure genres which seem to be multiplying by the minute, the artists responsible for connecting with you through their craft have bared their souls to do so. And we think that’s worth celebrating.
Like the musicians we’re honouring, we’re obsessed with our craft; fine-tuning and tweaking our products to make sure we constantly deliver full-bodied, symphonic sound. So from a single note played on a piano, to the full impact of a bass guitar, you can rest assured that you’ll always be doing justice to your music.
Please read this manual carefully before use.
Instructions for use
Box contents
Getting started
• KS
Flair Bluetooth speaker adaptor • 3.5 mm aux-in cable • User manual • Power
1
2
3
4
5
8
7
• Short
press On/Off (1) to turn the speaker on. LED Light indicator (2) will flash blue and will automatically be in pairing mode • Press and hold On/Off (1) to turn the speaker off
Charging the speaker
Functions 1. On/Off button 2. LED light indicator 3. Previous track button 4. Next track button 5. Volume– 6. Volume+ 7. Play/Pause 8. Headphone port 9. Aux-in port 10. USB charging port 11. LED charge light indicator
6
It is recommended that you give the speaker a full charge before its first use. 1. Plug the micro USB end of the charge cable into the speaker 2. Plug the standard USB cable end into either a computer or a USB mains charger 3. The LED charge indicator (11) will be solid red whilst charging 4. When charging is complete, the LED charge indicator (11) will turn off 8
9
10 11
Note: It may take up to 5 hours before the speaker is fully charged. It may take a little longer for first charge.
9
Bluetooth setup
Playing music on your speaker
Pairing the speaker to your device
Bluetooth
Before you can use the speaker via Bluetooth, it will need to be paired to your device. To do this:
If already connected to the speaker via Bluetooth, simply find and play the music on your device and the sound will play through the speaker. Some devices may require you to select the audio output. You should be able to do this by going to the ‘Listen via’ or ‘Play via’ menu. If unsure, please refer to your device’s manual.
1. Short press On/Off (1) to turn the Flair on 2. After 6 seconds, the speaker will automatically enter pairing mode 3. The Bluetooth indicator light will be flashing blue quickly 4. Turn your device’s Bluetooth ON and search for new devices 5. When KSFLAIR appears in the list, select it and if asked for a passcode, enter ‘0000’ 6. The speaker should then be paired to your device and the LED light indicator (2) will be a solid blue and slowly flashing blue when playing music 7. To un-pair, press and hold play/pause (7) and the LED light indicator will be quickly flashing blue and the Flair will automatically go back to pairing mode
If you are using an A2DP Bluetooth-enabled device, you will be able to use the following functions on the speaker: • Play/Pause
(7) track (4) • Previous track (3) • Volume– (5) • Volume+ (6) • Next
– short press – short press – short press – short press – short press
To pair additional devices to the speaker, first make sure the Bluetooth on any devices that have already been paired to the speaker is turned off. Then follow the above instructions from step 1.
10
11
Auxiliary
Call Handling
Using the provided cable, you can connect your device directly to the speaker. To use this, simply:
While in Bluetooth mode you can make and take phone calls. You can use your device to answer/end/reject the phone call or you can use your speaker.
−− Plug
the cable into the speaker’s Aux-in port (9) and your device LED light indicator (2) will be a solid red once connected −− Press play on your device −− The
• Volume–
• Volume+
(5) (6)
– short press – short press
When playing music using the cable, you will not be able to use the Play/Pause, Next track and Previous track functions.
• Answer • End
• Reject
– Short press Play/Pause (7) – Short press Play/Pause (7) – Long Press (3 seconds) Play/Pause (7)
Note: You can still take calls while in Auxiliary mode. However this will automatically turn your smartphone to loud speaker mode – you won’t be able to control the call from the speaker.
Headphone Jack You can connect headphones to you speaker. To do this, simply: • Connect
your speaker to your device using either Bluetooth or auxiliary you headphone cable into the headphone port (8) • Not compatible with CTIA cables • Plug
Please note: Your device will have an internal amplifier and if it is playing digital files like MP3s it will also have an integrated DAC (Digital Audio Converter). If you turn the volume up to 100%, your device will be sending a distorted signal. To avoid this, and to get the best quality from the speaker, we recommend that you do not run your device any higher than 95% volume. Some devices output higher than others, so you may need to reduce the volume if you experience distortion. 12
13
Care for your Flair
Troubleshooting
Please DON’T: • Get the Flair wet • Drop the Flair as this will invalidate your warranty • Open up the Flair. There are no user serviceable parts inside • Expose Flair to extreme temperatures or rapid changes of hot to cold or vice versa
We hope you’ve now got all the information you need to get started, but if you’re having problems with anything, please feel free to contact us on:
[email protected]
Please DO: • Clean the Flair with a soft dry cloth and no detergents
Specifications
14
S/N
60 dB
Bluetooth
V2.1 A2DP, AVRCP
Bluetooth range
up to 10 m
Frequency response
80 Hz – 18 kHz
Drivers
2 x 50 mm
Output RMS
2 x 5 W @ 4 ohm
Play time
up to 8 hours
Charging time
up to 5 hours
Battery Capacity
2200 mAh
The use and operation of this speaker is beyond our control. Warranty of the FLAIR is limited to defects caused by faulty manufacture or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances. This does not affect your statutory rights. Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an embedded, non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and will damage the product. Making any attempt to open the product or carry out repair voids any and all warranties
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development. 15
