Preview only show first 10 pages with watermark. For full document please download

Bmcd17 - Bhe Bonn Hungary Electronics Ltd.

   EMBED


Share

Transcript

BMCD17 DUAL CHANNEL LOW NOISE DOWN-CONVERTER • • • • VERY LOW PHASE NOISE LOW INTERMODULATION DISTORSION LOW POWER CONSUMPTION HIGH RELIABILITY This down converter is intended for use in professional applications such as satellite earth stations. It has extremely low phase noise properties, making it possible to receive very weak signals close down to the thermal noise floor. Due to the weatherproof sealing, it can be used effectively in harsh environmental conditions. Electrical characteristics: Input characteristics Input frequency fange Impedance Return loss Local leakage Input connector Output characteristics Frequency Impedance Return loss Power output (1dB compression) Local leakage Attenuation between outputs Transfer characteristics Conversion gain Gain adjustment Gain flatness Gain stability Noise figure Image rejection Attenuatin from input to output Spurious signal related signal independent Attenuation between channels Intermodulation distortion (IP3) Group delay Typical phase noise 3.4 – 4.2 GHz 50 ohm > 15 dB -80 dBm typ. (-70 dBm max.) N female 950 –1750 MHz 50 ohm > 15 dB > +10 dBm typical -80 dBm typ. (-70 dBm max.) > 80 dB 35 dB, nominal 20 dB with 1 dB steps ± 1 dB (in full band), ± 0.5 dB (in any 40 MHz band) ± 0.5 dB (0 to 50 °C) < 10 dB, typ. 8 dB > 70 dB > 80 dB -75 dBc -80 dBm @ Gmax. -80 dB (from inputs to other output) > 18 dBm @ 0 dB atten 7 nsec @ 40 MHz BW, 3 nsec @ 5 MHz BW -80 dBc @100 Hz -100 dBc @ 1 kHz -115 dBc @ 10 kHz -120 dBc @ 100 kHz BHE BONN HUNGARY ELECTRONICS Ltd. Microwave & RF Development and Manufacturing Ipari Park Str. 10. Budapest, H-1044 Phone: +36 1 233 2138 * P.O.Box 164. Budapest, H-1325 Fax.: +36 1 233 2506 Home page: www.bhe-mw.eu E-mail: [email protected] BMCD17 DUAL CHANNEL LOW NOISE DOWN-CONVERTER Electrical characteristics: Internal reference Frequency Accuracy Frequency Stability External Reference Reference Input Input Impedance @ 10 MHz Return Loss @ 10 MHz Input Reference Level Control Remote Input Impedance Return Loss @ 315MHz +/-5 MHz Control frequencies Input Power (via L band output) Operating Temperature + 1 ppm + 2 ppm 10 MHz, automatic change-over via L band output 50 ohm > 18 dB - 10 to + 10 dBm via L band output 50 ohm > 15 dB 314 MHz (A channel) & 316MHz(B channel) +13 to +24 V DC / cca.800 mA@+15V -40 to 70 oC Outline dimensions (mm): BHE BONN HUNGARY ELECTRONICS Ltd. Microwave & RF Development and Manufacturing Ipari Park Str. 10. Budapest, H-1044 Phone: +36 1 233 2138 * P.O.Box 164. Budapest, H-1325 Fax.: +36 1 233 2506 Home page: www.bhe-mw.eu E-mail: [email protected]