Transcript
BMWV+ Installation INSTRUCTIONS Note: When using RGB7+ as a back-up camera interface, your connection to the reverse light must be made through a relay.
Power/Ground Plug Red: 12 Volts Accessory Power. Black: Chassis Ground.
DB9 connector for
must have accessory 1. power. This is main power for the unit since it is digital. Connect this straight from the ignition harness whenever possible 2. ground.
must have chassis
is positive trigger 3. 12v for video input 2 on BMWV+. You may leave the attached toggle switch off and connect this wire directly to the reverse lights for automatic turn-on in reverse. (4-wire setup) / (3-wire setup) selector
to toggle from
Up / Down press both simultaneously to reset to default
Positive trigger for Video 2 on RGB7+. Male Input plug of BMWV/BMWV+
Maroon Male Connector
Insert
GPS
Original Blue Male Connector
Blue Female Output Connector on BMWV/ BMWV+ NAV-TV BMWV(+) For BMW/Range Rover/Mini-Cooper
Questions? Need vehicle-specific wiring information? Tech support available through our toll-free number1-866-477-3336
