Transcript
Booster Long range driver identification
Key Features: - Long range driver ID up to 10 m ( 33 ft) - Supported credentials • HID prox, EM, Nedap • MIFARE, HID iClass, LEGIC - One card solution - Simultaneous driver & vehicle ID - Maximizes perimeter security The Boosters enables long range driver identification. Driver based ID systems ensure that a vehicle can never get access to a secured area unless occupied by an authorized driver. The Booster is used in combination with a personal access credential. It is an easy to integrate solution for vehicle access, which eliminates the need to issue new cards. Driver based identification, how does it work? The driver based tag is made up of two elements. 1) Building access card 2) In-vehicle Booster The Booster is placed on the windshield on the inside of a vehicle. When an authorized building access card is inserted into the Booster it will be read and then boosted to the external Nedap TRANSIT reader. The TRANSIT reader transmits the credential ID to any standard back end security panel. If the credential is authorized and access is granted the gate will open automatically. Removal of the Driver ID is ensured by designing the system to require that the access card is also used for building access.
Matching vehicle and driver Optionally a separate ID (vehicle ID) can be programmed in the Booster hardware on certain models, this allows you to match the right driver with the right vehicle. Boosters are available for almost all card technologies: Prox Booster; supporting proximity access control badges operating on 120-125 kHz such as HID prox, EM and Nedap. Smartcard-Booster; supports ISO 14443 or 15693 compliant smartcards (eg. MIFARE, LEGIC and HID iClass) operating on 13.56 MHz. Depending on applied card technology either CSN or sector information can be read, see Booster_Installguide for more information. Transition-Booster; supports proximity (120-125 kHz) as well as smartcard (13.56 MHz) technology. The Transition-Booster is specifically designed to be used in applications were multiple card technologies are applied simultaneously. It allows for seamless migration from existing Prox to versatile smartcard applications. Booster applications Typical applications for the Booster are high secured areas like airports, seaports, military bases, utility companies, corporate and educational campuses, police, fire and other installations where vehicles must be assigned to a specific driver.
Change without prior notice/ version 2.10_English
Specifications Technical information
Prox-Booster
Part no.
9895744 Prox-Booster 9895736 Prox-Booster (single id) 120 kHz /2.45 GHz
Operating frequency Dimensions
Smartcard-Booster
Transition-Booster
9895337 Smartcard-Booster
9895752 Transition-Booster
13.56 MHz / 2.45 GHz
120 kHz / 13.56 MHz / 2.45 GHz
116 x 72 x 27 mm [4.6 x 2.8 x 1.1 in] according to Ertico OBU standard
Weight
95 gram [3.4 oz]
Protection
IP32 [approx. NEMA 2]
Color
Grey, according to RAL 7035
Operating temperature
-40 ... +85°C [-40 … +185°F]
Storage temperature
-40 ... +85°C [-40 … +185°F]
Detection range
Up to 10 meters [33 feet] with TRANSIT Standard , up to 4 meter [12 ft] with TRANSIT Entry
Humidity
10% ... 93% relative humidity, non condensing
Mounting
Attaches with suction pads to the windscreen on the inside of a vehicle. In case of a metallised windscreen a metal free communication window is required.
Certification
EN60950, EMC 89/336/EEC, EN50081-1, EN 50082-1, ETS 0908 and FCC
Battery life
Built-in factory replaceable lithium batteries with expected lifetime of 10 years*.
Note
*Life time expectation is based on: Average warm climate conditions. Exposure to extreme hot conditions might reduce battery life. Default operating mode C
120 gram [4.2 oz]
C: After user activation vehicle and driver ID is transmitted (default)
Operating mode
A: Continuous transmission of vehicle ID and driver ID * E: Continuous transmission of vehicle ID and driver ID without need to activate the switch, not even initially when card is inserted. * * This option is not available for the Prox-Booster single ID !
Inductive readable
Only the Prox-Booster’s embedded Booster ID.
Identification Driver Supported prox cards (120-125 kHz cards)
Prox-Booster: Driver ID & vehicle ID Prox-Booster single id: Driver ID HID prox, up to 40 bits (HIB required on reader level 7819102) EM/ Nedap
Supported smartcards (13.56 MHZ)
Readers
Special versions
Built-in user replaceable AAA lithium batteries with expected lifetime of 5 years*.
C: After user activation vehicle and driver ID is transmitted (default) A: Continuous transmission of vehicle ID and driver ID E: Continuous transmission of vehicle ID and driver ID without need to activate the switch, not even initially when card is inserted.
120 gram [4.2 oz]
Built-in user replaceable AAA lithium batteries with expected lifetime of 5 years*.
C: After user activation vehicle and driver ID is transmitted (default) A: Continuous transmission of vehicle ID and driver ID E: Continuous transmission of vehicle ID and driver ID without need to activate the switch, not even initially when card is inserted.
Embedded Booster ID (vehicle ID)
Embedded Booster ID (vehicle ID)
Driver ID & vehicle ID
Driver ID & vehicle ID HID prox, up to 40 bits (HIB required on reader level 7819102) EM, Nedap
ISO 14443 1/2A/3A (MIFARE CSN and optional sector information, MIFARE DESFire CSN) ISO 15693 1/2/3 (LEGIC Advant UID, for LEGIC sector information, see special versions) HID iCLASS CSN
ISO 14443 1/2A/3A (MIFARE CSN and optional sector information, MIFARE DESFire CSN) ISO 15693 1/2/3 (LEGIC Advant UID, for LEGIC sector information, see special versions) HID iCLASS CSN
9990410 TRANSIT PS270 Standard reader 9875220 TRANSIT PS270 Standard reader USA 9876200 TRANSIT Entry 9895736 Prox-Booster Single ID, single ID version without embedded vehicle ID, driver ID only. 9848940 Booster HID, Single ID version to read HID prox cards, driver ID only
9895728 Smartcard-Booster Legic (Dedicated LEGIC version, which can read LEGIC sector information, see separate Smartcard-Booster Legic_ProdBull)
Represented by: NEDAP N.V. Automatic Vehicle Identification - PO Box 103 - NL-7140 AC Groenlo T: +31 (0) 544 471 666 - F: +31 (0) 544 464 255 - E:
[email protected]
www.nedapavi.com
