Transcript
bass guitar
Specifications Nominal Diameter Nominal Impedance Rated Power AES (1) Continuous Program Power (2) Sensitivity @ 1W/1m (3) Voice Coil Diameter Voice Coil Winding Depth Magnetic Gap Depth Flux Density Magnet Weight Net Weight
266mm (10") 8Ω 150W 300W 96.0dB 50mm (2") 11mm 8mm 1.20T 1100g 3.5kg
Thiele & Small Parameters (4) 6.10Ω Fs 5.93 Qes 0.33 Mms 276µm/N Bxl 42.6l Sd +/-2.4mm X var (6) 1.87% Le (1kHz)
Ø266.0
55.0Hz 0.35 30.7g 13.48Tm 330.1cm2 +/-3.5mm 0.85mH
Ø235.0
Re Qms Qts Cms Vas X max(5) η0
n° 8 holes 5×9 on Ø 250.0
4.0
Constructive Characteristics Magnet : Ferrite Basket Material : Pressed Sheet Steel Voice Coil Winding Material : Copper Voice Coil Former Material : Kapton Cone Material : Paper Cone Treatment : No Surround Material : Treated Cloth Dust Dome Material : Solid Paper
35.0
102.0
67.0
• •
8.0
Punch sound bass guitar loudspeaker 2” voice coil Kapton former Ferrite magnet circuit 96.0 dB sensitivity
punch
Code ZJ05820 10" 300W 300W
4.5
• •
BP 10/ 10/150 8
Ø 134.0
Frequency Response on 35 Litres Vented Box @ 1W, 0.5m, normalized to SPL 1m Free Air Impedance +110
500
+105 200 +100
+95
d
100
+90 50
B
Ω
+85 S P L
+80
20
+75 10 +70 5 +65 3
Note: 1 : Rated Power measured with 2 hours test with pink noise signal, 6dB crest factor, loudspeaker mounted on enclosure 2: Power on Continuous Program is defined as 3 dB greater than the Rated Power 3: Calculated by Thiele & Small parameters 4: Thiele & Small parameters measured with laser system without preconditioning test 5: Measured with respect to a THD of 10% using a parameter-based method 6: Value corresponding to a decay of the Force Factor, or Compliance, or both, equal to the 50% of the small signal value. 7: Drawing dimensions: mm
+60 20
50
100
200
500
1k
2k
5k
10k
20k
Hz
Due to continuing product improvement, the features and the design are subject to change without notice. SICA Altoparlanti s.r.l. - ITALY – website: www.sica.it - E-mail:
[email protected] - Tel. +39-071-7958072 - Fax +39-071-7959006
03/03/14
