Transcript
BPG6544
®
®
PICMG 1.3 PCI EXPRESS BACKPLANE FEATURES · 14-slot form factor supports one PICMG® 1.3 graphics-class system host board · Two PCI Express®, five PCI-X, two PCI and two ISA option card slots · PCIe card slot configurations: one PCIe x16 mechanical / x16 electrical and one PCIe x8 mechanical / x1 electrical* PCI-X card slot configurations: one 64-bit/133MHz and four 64-bit/66MHz PCI card slot configurations: two 32-bit/33MHz Optimized for use with Trenton high-performance PICMG 1.3 system host boards Two 10/100/1000Base-T backplane Ethernet ports** Four USB 2.0 backplane I/O connections** ATX/EPS, +12V AUX and terminal block input power connector configuration options Five-year factory warranty Made in U. S. A.
· · · · · · · ·
Dependable, always.
BLOCK DIAGRAM: PICMG® 1.3 System Host Board USB Connectors (P11 & P12)
X1 PCIe Link* (Expansion)
Ethernet Connectors (P13 & P14)
System Host Board Slot (Edge connectors A, B, C & D)
ATX or EPS Power Connector, (P1)
*Assumes Trenton TQ9 system host board
x16 PCIe Link* (A0)
64-bit/66MHz PCI-X
+12V Power Connector (P2) 32-bit/33MHz PCI PCI to ISA Bridge
PCI Connectors (C1, C2)
x4 PCIe Link (B0) PCI Express to Dual PCI-X Bridge
x16 PCIe Connector (PCIe2) PCI-X Connectors (A1, A2, A3, A4) PCI-X Connector (B1)
64-bit/133MHz PCI-X
APPLICATION EXAMPLES:
PCI EXPRESS BACKPLANE WITH PCIe, PCI-X, PCI and ISA SLOTS: ®
x8 PCIe Connector (PCIe1)
BPG6544 Backplane
I/0 Power Connector (P10)
ISA Connectors (D1, D2)
Optional IOB31 Board
®
The PCI Express link design of the Trenton BPG6544 backplane supports PICMG 1.3 graphics-class SHBs. The PCIe2 card slot connects directly to the SHB via a x16 PCI Express electrical link making it an ideal slot for high-end PCI Express graphics and video cards. PCIe1 is a x8 mechanical slot driven with a x4 electrical link delivered to the card slot via an IOB31 module installed on a Trenton TQ9 SHB. The 32-bit/33MHz PCI card slots are also connected directly to the SHB. The PCI-X slots connect to the SHB via a bridge chip that ensures secure data communications between high-speed PCI-X option cards and the SHB. The two ISA card slots connect to the SHB by way of a PCI-to-ISA bridge chip.
A system design that needs COTS option card support for a mix of PCIe, PCI-X, 32-bit/33MHz PCI and ISA cards simultaneously is the ideal application scenario for the BPG6544 backplane. The x16 electrical link on slot PCIe2 enables support for high-performance PCI Express graphics and video cards. The backplane design maximizes the system’s overall ROI by easing any potential support problems caused by option card interface technology transitions. The BPG6544 backplane saves costly re-engineering expenses by supporting two purpose-built ISA option cards. Example applications include; medical diagnostics, machine vision inspection, transportation, target acquisition and other military embedded systems.
BACKPLANE MODEL: BPG6544 MODEL# 6544-003 6544-004 6544-007 6544-008
MODEL NAME BPG6544-E+S BPG6544-EPS BPG6544-CRA BPG6544-CST
DESCRIPTION Vertical ATX and +12V AUX connectors with three high-current terminal blocks Vertical EPS and +12V AUX connectors with three high-current terminal blocks Right-angle ATX/EPS and +12V AUX connectors with three high-current terminal blocks Vertical ATX/EPS and +12V AUX connectors with three high-current terminal blocks
TRENTON Technology Inc. 2350 Centennial Drive, Gainesville, Georgia 30504 Sales: (800) 875-6031 Phone: (770) 287-3100 Fax: (770) 287-3150 E-mail:
[email protected] Web: www.TrentonTechnology.com
BPG6544 LAYOUT - TRENTON MOUNTING HOLE PATTERN DIMENSIONS: 12.300 8.975
2.525 2.125
8.763*
Trenton Hole Pattern Shared Hole Pattern
6.275 4.150
1.536*
2.075 .800*
* = Pin 1
1.426*
.400
.400 .600*
SUGGESTED TRENTON GRAPHICS CLASS PICMG 1.3 SHBs: TQ9 TML T4L
.388*
SLTD1
SLTD2
1.225* SLTA1
SLTA2
SLTA3
SLTA4
SLTB1
SLTC1
x16 PCIe Link (A0)
SLTC2
1.393* PCIe2
PCIe1 PCIeS
ENVIRONMENTAL SPECIFICATIONS:# Operating Temp.: 0° C. to 60° C Storage Temp.: -20° C. to 70° C Humidity: 5% to 90%, non-condensing
6.325 x1/x4 PCIe Link (PCIeS)
8.900
#
10.700 P11
12.900 P12
The Trenton BPG6544 is a lead-free, RoHS compliant backplane.
P13
64-bit/133MHz PCI-X 64-bit/66MHz PCI-X
32-bit 33MHz PCI
PCIe to PCI-X Bridge
+5V
P3
5V AUX Source JU4
P1
The Trenton BPG6544 backplane is designed for UL60950 and CAN/CSA C22.2 No. 60950-00.
+5V AUX +3.3V -12V -5V +5V +12V
32-bit/33MHz PCI
PSON
PWRGD PWRBT RESET SMBUS
P5
P4
+5V AUX
P10
PCI to ISA Bridge
x4 PCI Express Link (B0)
This backplane is designed to meet worldwide EMI emissions requirements, CE conformity and immunity standards. Contact Trenton for specific standard numbers.
P14
ISA Bus
Environmental specifications for system host boards / single board computers are usually lower than those of the backplane. Check with your SHB/SBC vendor.
P2
Product Photo Note: The photo of the 6544 backplane shown on page one is provided for illustrative purposes only. Actual connector locations are illustrated in the backplane layout drawings and on the Trenton website.
BPG6544 LAYOUT - PICMG 1.3 MOUNTING HOLE PATTERN DIMENSIONS: 12.300 2.000
9.600
PICMG® 1.3 Hole Pattern Shared Hole Pattern
9.288*
1.300
5.600 1.951*
1.010*
* = Pin 1
1.600
.800*
.400
.400 .600*
.388*
SLTD1
SLTD2
1.225* SLTA1
SLTA2
SLTA3
SLTA4
SLTB1
SLTC1
x16 PCIe Link (A0)
SLTC2
1.393* PCIe2
PCIe1 PCIeS
6.325 x1/x4 PCIe Link (PCIeS)
9.850 12.000 P11
12.900 P12 P13
64-bit/133MHz PCI-X 64-bit/66MHz PCI-X
PCIe to PCI-X Bridge
32-bit 33MHz PCI
P3
P4
P14
ISA Bus +5V
5V AUX Source JU4
32-bit/33MHz PCI
P5
+5V AUX
P1
P10
PCI to ISA Bridge
x4 PCI Express Link (B0)
Engineering Notes: All power connectors are shown in the layout drawings. The connectors are populated based on model. Nominal PCB thickness: 0.080” Connector spacing: .800” centers To find the center of a PCI-X/PCI option card connector to the left of the reference dimension hole, add 0.150” to the pin 1 location dimension. To find the center of a PCI Express option card connector and the SHB slot add 0.049” to the pin 1 location dimension. Mounting holes: 0.156” diameter All dimensions are inches. *PCIe1 slot functionality requires an IOB31 installed on the SHB. The Trenton TQ9, TML and T4L-class of SHBs deliver a x1 PCIe link to the option card slot. ** Optional USB and Ethernet connectivity provided by the PICMG 1.3 System Host Board. Not all SHBs support this capability. PICMG is a registered trademark of the PCI Industrial Computer Manufacturers Group. All other product names are trademarks of their respective owners.
Copyright ©2009 by TRENTON Technology Inc. All rights reserved.
+5V AUX +3.3V -12V -5V +5V +12V
PSON
PWRGD PWRBT RESET SMBUS
P2
Dependable, always.
TRENTON Technology Inc. 2350 Centennial Drive, Gainesville, Georgia 30504 Sales: (800) 875-6031 Phone: (770) 287-3100 Fax: (770) 287-3150 E-mail:
[email protected] Web: www.TrentonTechnology.com
8416544 11119 1.1
