Transcript
BPG6615
®
®
PICMG 1.3 PCI EXPRESS BACKPLANE FEATURES · 14-slot form factor supports one PICMG® 1.3 graphics-class system host board · Five PCI Express® and six PCI-X/PCI option card slots · PCIe card slot configurations: one PCIe x16 mechanical / x16 electrical and four PCIe x8 mechanical / x4 electrical PCI-X card slot configurations: two 64-bit/100MHz and four 64-bit/66MHz Optimized for use with Trenton high-performance PICMG 1.3 system host boards Two 10/100/1000Base-T backplane Ethernet ports** Four USB 2.0 backplane I/O connections** ATX/EPS, +12V AUX and terminal block input power connector configuration options Five-year factory warranty Made in U. S. A.
· · · · · · ·
Dependable, always.
BLOCK DIAGRAM: PICMG® 1.3 System Host Board USB Connectors (P11 & P12) Ethernet Connectors (P13 & P14)
BPG6615 Backplane
x16 PCIe Link (A0)
System Host Board Slot (Edge connectors A, B, C and D)
I/0 Power Connector (P10)
x4 PCIe Link ATX or EPS Power Connectors (P1 & P21) x4 PCIe Link
+12V Power Connectors (P2 & P22) PCI-X Connectors (A1, A2, A3, A4) PCI-X Connector (B1, B2)
64-bit/66MHz PCI-X
64-bit/100MHz PCI-X
x4 PCIe Link (B0) PCI Express to Dual PCI-X Bridge
x4 PCIe Link
PCI EXPRESS BACKPLANE WITH FIVE PCIe and SIX PCI-X/PCI SLOTS: ®
®
The PCI Express link design of the Trenton BPG6615 backplane supports PICMG 1.3 graphics-class SHBs. As shown in the block diagram, a PCI Express switch is used on the backplane to enable support for four of the PCIe card slots. This high-speed PCIe switch has a very low latency that enables high speed data throughput between the SHB and these card slots. The PCIe2 card slot is connected directly to the SHB via a x16 PCI Express electrical link. Two of the PCI-X slots support 64-bit/100MHz option cards and the remaining four PCIX slots offer 64-bit/66MHz card support. The PCI-X slots also support universal PCI cards.
24 Lane PCI Express Fan Out Switch
x4 PCIe Link
x4 PCIe Link
x16 PCIe Connector (PCIe2) x8 PCIe Connector (PCIe3) x8 PCIe Connector (PCIe4) x8 PCIe Connector (PCIe5) x8 PCIe Connector (PCIe6)
APPLICATION EXAMPLES: A system design that needs COTS option card support for a mix of PCIe and PCI-X/PCI cards simultaneously is the ideal application scenario for the BPG6615 backplane. The x16 electrical link on slot PCIe2 enables support for high-performance PCI Express graphics and video cards. The backplane design maximizes the system’s overall ROI by easing any potential support problems caused by option card interface technology transitions. Example applications for the BPG6615 backplane include; medical diagnostics, machine vision inspection, transportation, target acquisition and other military embedded systems.
BACKPLANE MODEL: BPG6615 MODEL# 6615-010
MODEL NAME BPG6615-RAV
DESCRIPTION Right-angle and vertical ATX/EPS and +12V AUX connectors with two high-current terminal blocks
TRENTON Technology Inc. 2350 Centennial Drive, Gainesville, Georgia 30504 Sales: (800) 875-6031 Phone: (770) 287-3100 Fax: (770) 287-3150 E-mail:
[email protected] Web: www.TrentonTechnology.com
BPG6615 LAYOUT - TRENTON MOUNTING HOLE PATTERN DIMENSIONS: 12.300 9.426* 8.975
2.525 2.125
6.275 4.150 3.264* 2.363* 2.075 .800
SUGGESTED TRENTON GRAPHICS CLASS PICMG 1.3 SHBs: DUAL PROCESSOR SYSTEM HOST BOARDS MCGT MCGT-E
Trenton Hole Pattern Shared Hole Pattern
* = Pin 1
1.637*
SINGLE PROCESSOR SYSTEM HOST BOARDS MCGI TQ9 TML T4L
0.400
.800
USB
0.388* 1.225* 1.393*
P12
USB
PCIe2
PCIe3 PCIe4
PCIe6
PCIe5
SLTA2 SLTA3
SLTA1
SLTA4
SLTB1
SLTB2
ENVIRONMENTAL SPECIFICATIONS:#
P11
x16 PCIe Link (A0)
Operating Temp.: 0° C. to 60° C Storage Temp.: -20° C. to 70° C Humidity: 5% to 90%, non-condensing
6.325 8.900
#
10.700
PCI Express Fan Out Switch
x4 PCIe Link (B0)
P22
SHB Slot
PCIe to PCI-X Bridge
P1
1
P7 P6
LEDs 1
1
This backplane is designed to meet worldwide EMI emissions requirements, CE conformity and immunity standards. Contact Trenton for specific standard numbers.
P21
JU4 P9 P8
The Trenton BPG6615 is a lead-free, RoHS compliant backplane.
1 PCI-X (64-bit/100MHz)
PCI-X (64-bit/66MHz)
Ethernet P14 Ports
12.900
1
x4 PCIe Links
P13 P3
The Trenton BPG6615 backplane is designed for UL60950 and CAN/CSA C22.2 No. 60950-00.
+3.3V +12V -5V -12V +5V +5VAux
P2
P10
P4
Environmental specifications for system host boards / single board computers are usually lower than those of the backplane. Check with your SHB/SBC vendor.
Product Photo Note: The photo of the 6615 backplane shown on page one is a provided for illustrative purposes only. Actual connector locations are illustrated in the backplane layout drawings and on the Trenton website.
1
1
BPG6615 LAYOUT - PICMG 1.3 MOUNTING HOLE PATTERN DIMENSIONS: 12.300
9.951*
PICMG® 1.3 Hole Pattern
9.600 6.189*
2.000 1.300
5.600
1.600
.800
2.962*
Shared Hole Pattern
* = Pin 1
0.400
1.112*
USB
0.388* 1.225* 1.393*
P12
USB
PCIe2
PCIe3 PCIe4
PCIe6
PCIe5
SLTA2 SLTA3
SLTA1
SLTA4 SLTB1
SLTB2
P11
x16 PCIe Link (A0)
6.325 PCI Express Fan Out Switch
x4 PCIe Link (B0)
P22
PCI-X (64-bit/66MHz)
SHB Slot
12.900 P21
JU4
P1 P9 P8
P13
1
1
P3
P4
Copyright ©2009 by TRENTON Technology Inc. All rights reserved
+3.3V +12V -5V -12V +5V +5VAux
P10
PICMG is a registered trademark of the PCI Industrial Computer Manufacturers Group. All other product names are trademarks of their respective owners.
1
P7 P6
LEDs
12.000
1 PCI-X (64-bit/100MHz)
PCIe to PCI-X Bridge
Ethernet P14 Ports
9.850
1
x4 PCIe Links
Engineering Notes: All power connectors are shown in the layout drawings. The connectors are populated based on model. Nominal PCB thickness: 0.080” Connector spacing: .800” centers To find the center of a PCI-X/PCI option card connector to the left of the reference dimension hole, add 0.150” to the pin 1 location dimension. To find the center of a PCI Express option card connector and the SHB slot add 0.049” to the pin 1 location dimension. Mounting holes: 0.156” diameter All dimensions are inches. ** Optional USB and Ethernet connectivity provided by the PICMG 1.3 System Host Board. Not all SHBs support this capability.
P2
1
1
Dependable, always.
TRENTON Technology Inc. 2350 Centennial Drive, Gainesville, Georgia 30504 Sales: (800) 875-6031 Phone: (770) 287-3100 Fax: (770) 287-3150 E-mail:
[email protected] Web: www.TrentonTechnology.com
8416615 11109 1.0
