Transcript
BR- 2000- DC Dust Control Burnisher
Parts Manual
Model Part No.: 9007349 - BR- 2000- DC (120V) 1000152 - BR- 2000- DC (100V)
www.tennantco.com www.nobles.com
9007379 Rev. 01 (03-2014)
*9007379*
A Ref o Y
1 2 3 4 5
C6
Part No.
Serial Number
Description
82681 63810 51839 49263 82556
(000000) (000000) (000000) (000000) (000000- 001039 )
Bracket Wldt, Lpg Mount Latch Assy, Lpg Tank Mtg, W/Nut Nut Adjustable, Lpg Tank Mtg Tie, Cable Bracket, Vaporizer
1 4 2 3 1
54930
(000000-
Vaporizer
1
B
)
Qty.
HOW TO ORDER PARTS - See diagram above Only use TENNANT Company supplied or equivalent parts. Parts and supplies may be ordered online, by phone, by fax or by mail. Follow the steps below to ensure prompt delivery. 1. (A) Identify the machine model. 2. (A) Identify the machine serial number from the data label. Please fill out at time of installation for future reference. 3. (B) Ensure the proper serial number is used from the parts list. Model No. 4. Identify the part number and quantity. Serial No. Do not order by page or reference numbers. 5. Provide your name, company name, customer ID number, Machine Options billing and shipping address, phone number and purchase order number. Sales Rep. 6. Provide detail shipping instructions. Sales Rep. phone no. -
(C)
- identifies an assembly Y - identifies parts included in assembly
Tennant Company PO Box 1452 Minneapolis, MN 55440 Phone: (800) 553- 8033 or (763) 513- 2850 www.tennantco.com www.nobles.com Specifications and parts are subject to change without notice. Copyright E 2010, 2014 TENNANT Company, Printed in U.S.A.
Customer ID Number Installation Date -
CN
o Y
CÓMO SOLICITAR PIEZAS - Consulte el diagrama anterior. Utilice sólo las piezas suministradas por TENNANT Company o piezas equivalentes. Puede solicitar las piezas a través de internet, por teléfono, por fax o por correo. Siga los siguientes pasos para que la entrega sea rápida.
ES
1.
(A) Indique el modelo de máquina.
Rellene estos datos cuando realice la instalación para utilizarlos
2.
(B) Indique el número de serie de la etiqueta de datos.
como referencia en el futuro.
3.
(C) Asegúrese de que indica el número de serie correcto de la lista de piezas.
4.
Indique la cantidad y el número de la pieza. No realice el pedidoindicando el número de página o el de referencia.
5.
Incluya su nombre, el nombre de la empresa, el ID de cliente, las direcciones de envío y facturación, el número de teléfono y el número del pedido de compra.
6.
Facilite instrucciones de envío. o - identifica un conjunto Y - identifica piezas de un conjunto
(D)
Nº modelo Nº serie Opciones de la máquina Vendedor Nº teléfono vendedor Nº cliente Fecha de instalación -
COMMENT COMMANDER DES PIÈCES DÉTACHÉES - Voir le schéma ci- dessus. Utilisez uniquement des pièces fournies par la société TENNANT ou équivalentes. Les pièces et fournitures peuvent être commandées en ligne, par téléphone, fax, ou par courrier. Suivez les étapes ci- dessous pour assurer une livraison rapide.
FR
1.
(A) Identifiez le modèle de la machine.
2.
(B) Identifiez le numéro de série de la machine, à partir de l’étiquette signalétique.
3.
(C) Assurez- vous que le numéro de série correct est utilisé à partir de la liste de pièces détachées.
A remplir au moment de l’installation à titre de référence.
4.
Identifiez le numéro de pièce et la quantité. Ne commandez pas par page ou numéros de référence. Nº du modèle -
5.
Fournissez votre nom, le nom de votre société, votre numéro d’identification de client, l’adresse de facturation et d’expédition, le numéro de téléphone et le numéro du bon de commande.
6.
Fournissez des instructions d’expédition détaillées. o - identifie un assemblage Y - identifie les pièces composant l’assemblage
(D)
Nº de série Options de la machine Agent commercial Nº tél. de l’agent commercial Numéro d’identification client Date d’installation -
JP
o Y
TABLE OF CONTENTS STANDARD PARTS GENERAL RECOMMENDED MAINTENANCE ITEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
HANDLE GROUP . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
BASE GROUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
PAD DRIVER GROUP . . . . . . . . . . . . . . . . . . . . . . .
12
ELECTRICAL DIAGRAM, 120V/100V . . . . . . . . . .
14
BR- 2000- DC (03- 2014)
5
GENERAL RECOMMENDED MAINTENANCE
6
BR- 2000- DC (03- 2014)
GENERAL RECOMMENDED MAINTENANCE GENERAL RECOMMENDED MAINTENANCE ITEMS
Y Y
Y Y
Part No. 600189 1005629 1001369 1000617 1001923 1000584 1000622 22117 190753 1000703 611788 1210491 32506 1205787
Serial Number (00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000-
) ) ) ) ) ) ) ) ) ) ) ) ) )
Description Caster, Swivel, 2.5d 1.1w, .50- 13 Stem Skirt Assy, Dust- Cntrl Wheel, 05.0d 1.25w 0.50b Bag, Fltr, Cloth [2370/Ultrashine] (Standard) Bag, Fltr [Ultrashine, 1pick=1pkg] (Optional) Motor, 115vac 2000rpm 1.50hp Motor, 100vac 2100rpm 1.30hp (Japan) Brush, Carbon [1pick=1pc] Rectifier, 60a/600v Seal Pad, 20.0[Burnish, Hairblend,1pick=1ctn] (1Ctn = 5Pads) Driver Assy, Pad, 20d Device, Centering, Rh Pad Retainer Collar, Locking, Pad Driver, 6.1”
Qty. 1 1 2 1 1 1 1 4 1 1 1 1 1 1
ASSEMBLY Y
INCLUDED IN ASSEMBLY
BR- 2000- DC (03- 2014)
7
STANDARD PARTS HANDLE GROUP 2
4
3 20
23
24
23
24
29
1
18 16
1
13
40
17
5
15
7
6 14 11
10 5
9
34
8 39
36
37
35
38
32 33 30 31
12 19 25
21
28 27 26 22
21
8
BR- 2000- DC (04- 2010)
STANDARD PARTS HANDLE GROUP Ref. Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
Part No. 1038953 613272 1043573 801003 1000209 1043572 801448 1005511 1034174 1034176 1034951 801005 1034924 801004 801013 1034945 801006 1035649 801035 1035729 1034952 1000307 49609 140061 42368 1000517 1034155 1034872 612422 1000512 1034873 1040948 1000476 1013295 1043573 603104 603108 140239 1000760 130176 989611
Serial Number (00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000-
) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) )
Description Handle Assy, Burnisher, 120v [2370, Tj] Vr, Handle Kit, Front & Rear [2370] Screw, #10- 14 X 0.675, Spl[Shcs,Selftap] Cover [2100 Series] Circuitbreaker, 17.0a Screw, #10- 14 X 01.5, Spl[Shcs Selftap] Sleeve, Rbr, 0.59b 0.91d Cord, Power, 14/3 [23meter, Sjt] Clamp, Cable, Pa6 White Bushing, Flng, 05mmb 12mmd 08mml [Pa6] Plug, Hole, Handle, Gray [Spectrasheen] Vr, Lock, Slide, Lh [2100 Series] Pin, Roll, 04mmd X 40mml Vr, Lock, Slide, Rh [2100 Series] Spring, Extn, 0.27od 0.02wir 01.7l Lever, Adjmt, Handle Lever [2100 Series] Switch, Dpst, Momentary [2370] Ball [2100 Series] Strainrelief, Bshg, [2370] Screw, Hex, M4 X 0.7 X 12, Dbl Thrd Handle, Pivot, Half Screw, Soc, M8 X 1.25 X 16, 12.9 Washer, Lock, Ext, 08, Pl Nut, Hex, Std, M4 X 0.70, 8 Cord, 14ga /3, 35.0l, W/ Receptacle,Gray Pin, Roll, 06mmd X 36mml Gear, Lock, Handle Seal, Org, Gear Seat Wire, 14ga 07.9l Blk Ferrule /.14ring Plunger, Notched Pin Vr, Tube Assy, Handle [2370] Rod, Release [Spectrasheen] Spring, Cmpr [2100 Series] Screw, #10- 14 X 0.675, Spl[Shcs,Selftap] Hook, Cord, Blk [Quick- Release] Spring, Cmpr, Switch Bolt, Shld, .38d X 1.75, .31- 18 Cover, Handle [2370] Clip, Cord, Strainrelief [Belt] (Optional) Adapter, Ground [Pse] (Japan)
Qty. 1 1 9 1 1 2 1 1 1 1 1 1 1 1 2 1 2 1 2 1 1 2 4 2 2 1 2 1 2 1 1 1 1 1 2 1 1 1 1 1 1
ASSEMBLY Y
INCLUDED IN ASSEMBLY
BR- 2000- DC (03- 2014)
9
STANDARD PARTS BASE GROUP 36
35
37 34 39
38
40
35 21
33
23 24
19
22
18 26 27
17
25
32
16
15 14 31
30 23 19
29
28 13 12 11
10
9 8 7
41
2
1 20
5
6 4 3
10
BR- 2000- DC (03- 2014)
STANDARD PARTS BASE GROUP
Y
Y
Y
Ref. 1 2 3 4 5 6 7 8 9 10 11 12 13 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 34 35 36 37 38 38 39 40 41
Part No. 600189 140509 630613 069767094 602044000 1005629 9007664 1001193 103019 1001369 4252 140063 1000617 1001923 140962 1000277 140706 1000225 1000307 140027 140350 1016399 140014 1020341 600974 140894 611865 20536- 2 200001486 200101017 1010685 36643 600194 200001483 9007666 1026786 9007841 613866 612771 1011541 1060465 1060463 1034731 130175 1005645
Serial Number (00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000-
) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) )
Description Caster, Swivel, 2.5d 1.1w, .50- 13 Stem Nut, Hex, Jam, .50- 13, Ss Bumper, Strip, 1626mm [L03] Band Kit, 72 Inch, Replmt Fastener [Adjusting, S- 2500 Skirt] Skirt Assy, Dust- Cntrl Base, 20.0, Rm- Blk, Afmkt Axle, .5d X 14.72l Nut, Retainer, 0.50d 0.29l, Ss Wheel, 05.0d 1.25w 0.50b Washer, Flat, .50 Compression, Zn Washer, Flat, 0.51b 1.25d .31, Nyl Bag, Fltr, Cloth [2370/Ultrashine] (Standard) Bag, Fltr [Ultrashine, 1pick=1pkg] (Optional) Latch, Cmpr, Spring, Knurled Knob, Pl Bag, Door [Nobles] Rivet, Blind, .125d, Pl Bracket, Handle, Sppt Handle, Pivot, Half Washer, Flat, 0.35b 0.75d .04, Ss Screw, Pan, Phl, 10- 16 X 0.50, Ss[Typ25] Screw, Hex, M8 X 1.25 X 30, Nl, Ss Washer, Flat, 0.31b 1.50d, Fendr, Pl Screw, Hex, M8 X 1.25 X 20, Ss, Sems Knob, Star, 2.25d 4ear 1.1l .38id, Bshg Screw, Set, Soc, 10- 32 X 0.25, Blk[Cppt] Stud, Adjmt Washer, Flat, 0.50b 1.00d .03, Nyl Screw, Soc, M8 X 1.25 X 16 Nut, Hex, Jam, M8 X 1.25 Spring, Extn, 0.98od 0.11wir 03.8l Nut, Hex, Lock, .38- 16, Nl, Thin Bracket, Spring Screw, Soc, M8 X 1.25 X 12, Pl Cover, Motor, Rm- Cphg, Afmkt Label, Warning [Expl,Fire,Shk En/Fr/Es] Cover, Motor, Rm- Cphg, Afmkt, Tj Label, Warning, 4 X 3, Tj[Ac Floor Mach] (Japan) Label, Pad Press [2370] Gauge, Pad, Press 4- 16a D.C. Label, Logo, Cmdty, Dual, Small Label, Logo, Cmdty, Tco, Small Screw, Hex, M6 X 1.00 X 16, Ss, Sems Plug, Hole, Rnd, 0.75d, Blk Shield, Skirt
Qty. 1 1 1 1 1 1 1 1 2 2 2 2 1 1 1 1 2 1 2 4 6 4 1 4 1 1 1 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 2 2 1
ASSEMBLY Y
INCLUDED IN ASSEMBLY
BR- 2000- DC (03- 2014)
11
STANDARD PARTS PAD DRIVER GROUP 4 2
1
6 9 30
20
8 5
22
15
2 3
31
7
16
10
13
17
11
19
14
12
18 17
15
16 17
21 21
18 19
17
23 22 24
17
19
25
28
27
15 17
16
26
29
36 35
38
37
32 33 34
12
BR- 2000- DC (03- 2014)
STANDARD PARTS PAD DRIVER GROUP Ref. 1 2 3 4 5 5
Y Y Y Y Y Y
Y Y
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38
Part No. 613910 140003 15678 140350 1000584 1000622 22117 190753 1001679 140628 1000483 1000484 140028 140017 2949.5 1000409 140233 36643 140028 20536- 2 611859 600191 575600 1034731 1001408 611862 1000703 1000713 069760023 140524 1000711 1034731 130040 1001311 25732 140015 140221 611788 1210491 32506 1205787
Serial Number (00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000(00000000-
) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) )
Description Strap Kit, Replmt Washer, Flat, 0.25b 1.00d , Ss, Fendr Screw, Hex, M6 X 1.00 X 16, Ss Screw, Pan, Phl, 10- 16 X 0.50, Ss[Typ25] Motor, 115vac 2000rpm 1.50hp Motor, 100vac 2100rpm 1.30hp (Japan) Brush, Carbon [1pick=1pc] Rectifier, 60a/600v Cord, Power, 14/3, 024.0l Gray [Sjt] Key, Sq, 0.19 X 0.19, 1.00l Wire, 14ga 15.8l Blk .25qf /.25qf Wire, 14ga 15.8l White .25qf /.19ring Washer, Flat, 0.42b 1.00d .05, Ss Washer, Lock, Split, 0.38, Ss Screw, Hex, .38- 16 X 0.62, Ss Mount, Stud / Plate Screw, Hex, .38- 16 X 1.75, Ss Nut, Hex, Lock, .38- 16, Nl, Thin Washer, Flat, 0.42b 1.00d .05, Ss Washer, Flat, 0.50b 1.00d .03, Nyl Bracket, Arm, Lift Sleeve, P/M, 0.38b 0.50d 0.2l, Pl Washer, Flat, 0.25b 1.06d, Rbr, Neo Screw, Hex, M6 X 1.00 X 16, Ss, Sems Cam, Stop Bracket, Motor Seal Plate, Seal, Motor Mount Washer, Flat, 0.77b 1.26d .03, Ss Nut, Hex, Lock, .25- 20, Kep Plate, Base, Seal Screw, Hex, M6 X 1.00 X 16, Ss, Sems Tie, Cable, Nyl, 06.0l .12w Retainer, Seal Washer, Flat, 0.36b 1.25d .09, Pl Washer, Lock, Split, 0.31, Ss Screw, Hex, .31- 18 X 1.25, Ss Pad, 20.0[Burnish, Hairblend,1pick=1ctn] (1Ctn = 5Pads) Driver Assy, Pad, 20d Device, Centering, Rh Pad Retainer Collar, Locking, Pad Driver, 6.1”
Qty. 1 2 1 1 1 1 4 1 1 1 1 1 4 4 4 4 2 6 6 12 2 6 2 2 2 1 1 1 1 8 3 9 1 1 1 1 1 1 1 1 1
ASSEMBLY Y
INCLUDED IN ASSEMBLY
BR- 2000- DC (03- 2014)
13
STANDARD PARTS ELECTRICAL DIAGRAM, 120V/100V
CIRCUIT BREAKER 17AMP MAIN SWITCH BLACK WHITE BLACK W H T
GREEN POWER CORD
B L A C K
CORD TO MOTOR
GROUND IN HANDLE COVER
GREEN
WHITE RED
BLACK
BLACK WHITE TOP OF MOTOR PAD PRESSURE METER
14
BR- 2000- DC (04- 2010)
STANDARD PARTS
BR- 2000- DC (04- 2010)
15
