Brck Spec Sheet - Brck Education

Transcript

TOP BOTTOM 72mm (2.82 inches) 8 132mm (5.18 inches) 1 45mm (1.77 inches) SIDE 2 3 4 5 7 6 132mm (5.18 inches) 72mm (2.82 inches) Weight : 510g (1.125lbs) 1. STATUS LIGHT 4. ETHERNET PORT 2. POWER BUTTON 5. FULLSIZE SIMCARD SLOT 3. POWER MICRO USB 6. AUX USB 7. GPIO CONNECTION (General purpose Input/Output) 8. CELL SMA PORT (Antenna slot) BRCK Spec Sheet What is BRCK? BRCK makes accessing the internet simple and reliable wherever you are. It’s a rugged, cloud managed, full-featured modem/router with built in fail-overs and programmable GPIO expansion. If there’s a way for you to connect, BRCK will help you get up and stay up no matter where you are. Physical Specs Dimensions: 132mm (5.18 inches) by 72mm (2.82 inches) by 45mm (1.77 inches) Weight: 510g (1.125) Communication Capabilites • 802.11 b/g/n Wireless • 10/100Mbps WAN/LAN Port • Wifi Bridge and Client modes • WPA/WPA2 PSK, WPA Enterprise, & WEP Encryption • Network Bandwidth Load Balancing • NFS/FTP Network Attached Storage • External GSM Antenna Port • Auto Network Failover • Does not support 5GHz networks, only 2.4GHz Field Ready Hardware • Ruggedized body handles drops, dust, and weather • 8 hour battery life in Full Power Mode • Extended battery life in 5 different low power • 4 GB of onboard storage (Factory Upgradable to 32GB) • Power Efficient Atheros 400 MHz Processor states BRCK Cloud Dashboard AES Encrypted BRCK Cloud Interface Monitor and Manage • All Settings Managed from BRCK Cloud • Named BRCK Profiles with Rule-Based Profile Switching • Simple and Advanced Configuration Interfaces • Recipes for Standard Configurations • Multiple Devices Managed per Account • Power • Uptime • Bandwidth • Expansion Port Logging BRCK Expansion Programming • Simple Script-based Interface for custom apps • Upload Custom Arduino Sketches remotely from the cloud Easy 3G Management Global APN Database Expansion IO • Arduino-compatible Programmable 8-bit AVR • Network Settings Notification Center (SMS and/or Email Notifications for) • Power • Battery • Network • Bandwidth • 3G Balance • Expansion IO Feedback • Worldwide Database of APN Settings • Automatically Synced with BRCK • Zero User Configuration when Switching SIMs Expansion Controller • 32K Flash • 20 General Purpose I/O Pins • 8 x Analog to Digital I/O • SPI/UART/I2C communication available • 2 x 5V 500ma Power output • External USB-host port on GPIO expander • Power input • Standardized connector with open-hardware pinout • Realtime clock • Wakeup and control BRCK from Arduino-compatible microcontroller. Power • 4-18V power input • 8,000 mAh LiPo Battery • MicroUSB and GPIO expander power inputs • BCS 1.2 Compliant Charging input • Reverse voltage and over voltage surge protection • Solar input compatible with cell saturation protection Ports • RJ45 Ethernet LAN/WAN Port • Easy Change SIM Card Slot • USB Host Port, with mobile device charging capacity • RP-SMA External Antenna Connection for 3G/4G antennas Applications • Field and Travel Teams • Remote Systems Monitoring • Medium and Small Business Network • Support Teams • Personal Networking