Transcript
Breadboards/Test Leads www.mpja.com for Complete Product Line SOLDERLESS BREADBOARDS
A
C
B
G
F
E
White ABS plastic body (except G clear), B, C & E come with metal mounting base. Nickel plated phosphor bronze contacts. Contact resistance less than 1 milliohm @ 1kHz. Tested for over 10,000 cycles. Snap lock molded dovetail for combining multiple boards, Suitable for 19-29 AWG wire & all DIP size components. Please visit our web site for more detailed information. STOCK #
24443-TE 24444-TE 24445-TE 24447-TE 27027-TE 18103-TE
FIG.
A B C E F G
DESC.
830 point 830 point 3 Binding Post and Jumper Kit 1660 point 3 Binding Post and Jumper Kit 3220 point 4 Binding Post and Jumper Kit 140 Piece 22 AWG Jumper Wire KIt 830 point Clear ABS Body
Breadboard with built-in multi-output power supply with LCD Meters. Dual LCD Meters monitor the + & - Variable output supplies. Features: 2 LCD Voltmeters, 4 power supply binding posts, 5 Distribution strips (500 pts), 3 Breadboard panels (1890Pts.), one +5VDC @ 1A supply, one 0 to +15VDC @ .5A supply, one 0 to-15VDC @ .5A supply. All parts are mounted in a metal case. Includes 6ft. IEC power cord. W: 8” D: 10-1/2” T: 3-1/2” WT: 5.7 17710-TE
WT.
1EA
10+EA
.3 .8 .9 2 .3 .3
$4.95 $9.95 $12.95 $22.95 $3.95 $4.95
$3.95 $8.95 $11.49 $19.49 $3.49 $3.95
6-1/2” X 2-1/8”
65PC. MOLDED JUMPERS
POWERED PROTOTYPING SYSTEM
STOCK #
SIZE L X W
6-1/2” X 2-1/8” 7-7/8” X 4-1/8” 8-3/8” X 5-1/8” 10-3/8” X 9-1/8”
DESC.
1EA
Metered Powered Breadboard
$89.95
Multi-colored flexable jumpers with a .024in. dia. steel pin with molded strain relief on ends. Designed for breadboards. You get 4pcs. ea. 240mm and 200mm, 8pcs. 150mm, and 49pcs 120mm L: 4-1/2” to 9-1/2” WT: .08 STOCK #
30116-PL
DESC.
65Pc. Breadboard Jumpers
40PC. JUMPER PINS Multi-colored ribbon cable with a single Pin on both ends of each wire. Peel off what you need. .025”pin fits Arduino header sockets L: 7” WT: .08 STOCK #
POWERED BREADBOARD
STOCK #
DESC.
31217-PL
Header Jumpers/Pins
DESC.
1EA
Powered Breadboard
$10.95
Multi-colored ribbon cable with a single socket on both ends of each wire. Peel off what you need. Socket accepts .025 round or square pins L: 8”
WT: .09
STOCK #
30117-PL
DESC.
8in Header Jumpers/Sockets
40PC. JUMPERS MALE/FEMALE
STOCK #
31218-PL
DESC.
1EA
Header Jumpers/Pins & Sockets
$2.72
3 PIN HEADER JUMPERS
Three 170 tie point solderless breadboards; 1 each in Red, White & Blue. Features: ABS plastic body, Nickel plated phosphor bronze contacts Rated 2A Max. Contact resistance less than 1 milliohm @ 1kHz. Tested for over 10,000 cycles. Suitable for 19-29 AWG wire and all DIP size components.
11in. Multi-colored ribbon cable with a 3 position socket on both ends of wire. Socket accepts .025 round or square pins. .10in. Pitch.
L:1.8”
L: 11”
19048-TE
56
W: 1.4”
1EA
$3.95
Multi-colored ribbon cable with a single Male Pin on one end and a single Female Socket on the other end of each wire. Peel off what you need. .025”pin/sockets fits Arduino/ Raspberry-Pi headers. L: 7” WT: .08
MINI SOLDERLESS BREADBOARDS
STOCK #
1EA
$4.95
40PC. FEMALE JUMPERS
Breadboard with attached 3.3V & 5V power supplies. Features: 2 Distribution strips (200 pts), Breadboard (830pts) panel, a +3.3VDC & +5VDC power supplyBoard. Max total load: 700mA. Supply Board plugs into breadboard. Selectable 5V, 3.3V or No Bus voltage for both bus strips. Power On/Off switch on board. Input power from USB Port or 5.5/2.5mm power jack. 6.5-12VDC input range. Includes a 12V Plug supply. Panel cutout: 45.5 X 26.5mm WT: .5 30176-TE
1EA
$3.95
H: .37” DESC.
3 Mini Breadboards
Total WT: .2 1EA
$7.95
WT: .007
STOCK #
31062-PL
DESC.
1EA
3 Cond. Header Jumpers, 11in.
$0.59
Toll Free Orders: 1-800-652-6733
www.mpja.com
Proto Boards
www.mpja.com for Complete Product Line 4-11/16 X 3-1/8” PROTO BOARD
1-3/4” X 1-1/2” PROTO BOARD
Double Sided .062” FR-4 board .1” pad spacing Plated copper pads General purpose prototyping board. 42 X 30 grid pattern with 1260 total Plated through holes. 27 double sided .1” pitch finger pads on both ends. For multiple ICs with room for discrete components. L: 4-11/16” (12cm) W: 3-1/8” (8cm) WT: .05 STOCK #
32011-PB
DESC.
Double Side Proto Board
1EA
$4.95
Double Sided .062”FR-4 board .1” pad spacing Plated through copper pads Mini general purpose prototyping board. 6 X 28 grid pattern with 168 total holes Holds 1+ 14 or 16 pin ICs with room for several discrete components. Ideal for interface or signal isolation circuits. L: 3-1/8” W: 13/16” WT:.011 STOCK #
DESC.
Mini FR-4 Proto Board
1EA
$0.99
2-3/4” X 1-3/16” PROTO BOARD
STOCK #
DESC.
Double Side Proto Board
1EA
$1.19
2-3/8” X 1-5/8” PROTO BOARD Double Sided .062” FR-4 board .1” pad spacing Plated copper pads Mini general purpose prototyping board. 20 X 14 grid pattern with 280 total Plated through holes. 12 “finger pads” on both ends. Holds 1+ 14 or 16 pin ICs with room for several discrete components. L: 2-3/8” (6cm) W: 1-5/8” (4cm) WT: .016 STOCK #
31091-PB
DESC.
Double Side Proto Board
1EA
$1.29
8 PIN SOP ADAPTER BOARD Double Sided .062” FR-4 board Front Back Plated copper pads Mini adapter board converts 8 lead TSOP/SSOP/SOP/SOIC/ SO .65 or 1.27mm pitch Flat Pack to a to a 8 pin .1” pitch X .5” width (2.54mm X 12.7mm) DIP pattern. Pins not Supplied SQ: 15/32” (12mm) WT: .001 STOCK #
31456-PB
DESC.
8 Pin SMD Proto Board
1EA
$0.59
10 PIN SOP ADAPTER BOARD Double Sided .062” FR-4 board Front Back Plated copper pads Mini adapter board converts 10 lead TSOP/SSOP/SOP/SOIC/ SO, .5 or 95mm pitch Flat Pack to a to a 10 pin .1” pitch X .5” width (2.54mm X 12.7mm) DIP pattern. Pins not Supplied L: 1/2” (12.8mm) W: 25/32” WT: .0005 STOCK #
31457-PB
DESC.
1EA
10+EA
Mini Proto Board
$0.59
$0.49
Single Sided .062”phenolic board .1” pad spacing unplatedcopper pads Mini general purpose board for prototyping. 23 X 18 grid pattern with 378 total holes (9 missing in corners). Holds 2+ 14 or 16 pin ICs with room for several discrete components. Ideal for interface or signal isolation circuits. Fits 15915-BX. L: 2-5/16” W: 1-15/16” WT: .013 STOCK #
16227-PB
DESC.
Small Proto Board
1EA
10+EA
$0.79
$0.49
3-3/16” X 2-1/2” PROTO BOARD
Double Sided .062” FR-4 board .1” pad spacing Plated through copper pads Mini general purpose prototyping board. 10 X 24 grid pattern with 240 total holes Holds 1+ 14 or 16 pin ICs with room for several discrete components. Ideal for interface or signal isolation circuits. 4 corner mounting holes L: 2-3/4” (7cm) W: 1-3/16” (3cm) WT: .012 31253-PB
STOCK #
15918-PB
2-5/16” X 1-15/16” PROTO BOARD
3-1/8” X 13/16” PROTO BOARD
30123-PB
Single Sided .062”phenolic board .1” pad spacing unplatedcopper pads Mini general purpose prototyping board. 17 X 14 grid pattern with 202 total holes (9 missing in corners). Holds 1+ 14 or 16 pin ICs with room for several discrete components. Ideal for interface or signal isolation circuits. Fits 15917-BX Case. L: 1-3/4” W: 1-1/2” WT: .009
DESC.
1EA
10 Pin SMD Proto Board
$0.59
Tech & Info: 561-848-1414
Single Sided, .062”phenolic board, .1” pad spacing, unplated copper pads. 31 X 24 grid pattern with 708 total holes (9 missing in corners). Holds 3+ 16 pin ICs. Fits 15913-BX Case. L: 3-3/16” W: 2-1/2” WT: .024 STOCK #
15914-PB
DESC.
Medium Proto Board
1EA
10+EA
$1.10
$0.89
4-5/16” X 3-1/8” PROTO BOARD Single Sided .062”phenolic board .1” pad spacing unplated copper pads General purpose board for prototyping. 42 X 31 grid pattern with 1293 total holes (9 missing in corners). Holds 10+ 14 or 16 pin ICs with room for several discrete components. Ideal for interface or signal isolation circuits. Fits 15911-BX Case. L: 4-5/16” W: 3-1/8” WT: .036 STOCK #
15912-PB
DESC.
Large Proto Board
1EA
10+EA
$1.75
$1.25
SMD COMPONENT ADAPTER BOARD Double Sided .062” FR-4 board Plated copper pads Mini adapter board converts 8 SMD resistors/Capacitors to a 16 pin .1” pitch X .3” width (2.54mm X 7.52mm) DIP pattern. Pins not Supplied L: 13/32” (20.3mm) W: 13/32” (10.16mm) WT: .001 STOCK #
31435-PB
DESC.
1EA
16 Pin SMD Component Board
$0.99
TQFP ADAPTER BOARD Double Sided .062” FR-4 board Front Back Plated copper pads Adapter board converts a 32-100Pin TQFP .5mm pitch Flat Pack or a 32-64 Pin TQFP .8mm” pitch to a .1” (2.54mm) pitch quad pins, Square pattern. Pins not Supplied L: 1-13/16” (47.5mm) W: 1-1/2” (38.mm) WT: .01 STOCK #
31464-PB
DESC.
64/100 Pin TQFP Adapter Board
Email:
[email protected]
1EA
$0.99
57
