Transcript
BRETFORD BASICS ™ ADJUSTABLE CABINET TV CART TVCA3654 Adjusts to multiple heights by resetting leg screws. Open, roomy shelves provide ample storage space. Lower cabinet locks keeping valuables safe when not in use.
Made In The USA
Now available with a new and improved 6-outlet power strip!
FEATURES • Features a 8-height capability, from 40"-54"H in 2" increments for best monitor or projecting height. • Top shelf height adjusts by resetting four leg screws. • Lower locking cabinet neatly stores videos and supplies and has a rear grommet hole for cord management, includes 2 keys. • Durable all-steel construction with die pressed shelves that include a 1/4" lip to prevent equipment from sliding off. • Rolls smoothly on 4" “Quiet Glide” swivel casters, 2 locking. • Ribbed rubber mat included on the top shelf to prevent equipment from sliding when in transport. • Recommended for use with up to 21" diagonal CRT monitors. • New and improved 6-outlet electrical unit available with built-in cord winder and 20' extension cord. Lets you set up anywhere in the room and still reach an electrical outlet. Electrical unit are standard on TVCA3654 “E” and “M” models. • TVCA3654 series carts feature a steel content with 25% to 35% post-consumer recycled steel and are recyclable at the end of the product life cycle. TVCA3654 series carts also comply with the GREENGUARD Environmental Institute’s GREENGUARD Children & Schools Indoor Air Quality standards contributing to points toward Leadership in Energy and Environmental Design (LEED) Certification. • Black powder paint finish. • Made in the USA.
DIMENSIONS
ENVIRONMENTAL SPECIFICATIONS
Overall : 28"w x 24"d x 40-54"h
The TVCA3654 adjustable carts are constructed using “prime” steel
Shelf: 28"w x 24"d
which has a 25% to 35% post-consumer recycled content and is recy-
Cabinet Interior: 28"w x 24"d x 17-1⁄2"h
clable at the end of the product life cycle. TVCA3654 series carts are
Cabinet Door Opening: 24-1/2"W x 141/2"H
certified to GREENGUARD Children & Schools Indoor Air Quality
Middle to bottom shelf: 17-1⁄2"
standards.
COLOR & FINISH
SUGGESTED SPECIFICATIONS
Black (BK) powder paint
Adjustable TV Cabinet Tables has three (3) 24" x 28" shelves. Each
STANDARD EQUIPMENT
shelf is press-formed with a 1⁄4" lip bordering the top surface on all four sides. A Black rubber mat 24" x 28" is placed on the top shelf.
28" x 24" Shelf (1)
Shelf has two (2) 3⁄16" diameter holes centered on the right side, the
Lower cabinet (1)
left side and the rear to accept an optional electrical assembly. Table
1" round plastic caster inserts (4)
has an adjustable top section that consists of one (1) 20-gauge 24" x
4" diameter casters (4)
28" shelf with four (4) 14-gauge steel legs 31"L. Each leg has one (1)
24" x 28" Rubber Mat (1)
1⁄4" diameter holes in the center of the leg that will accept a 1⁄4-20
Keys for cabinet lock (2)
machine screw. The holes are spaced 4" apart to permit eight (8)
Red plastic bag with all necessary hardware for assembly
table adjustments of 40", 42", 44", 46", 48", 50", 52" and 54" in
6-outlet electrical unit (1) [TVCA3654 “E” and “M” models only]
height when matched to the bottom section of the table. Each upper
WEIGHT AND FREIGHT CLASS
leg fits over the bottom section of the table and is secured at the desired height by the machine screw. The bottom section of the
TVCA3654-P4:
79 lbs.
adjustable table consists of a 20-gauge steel cabinet with a 28-
TVCA3654-E4:
81 lbs.
5/16"W x 17-1⁄2"H x 24-5/16"D interior dimension. Cabinet has one (1)
TVCA3654-M4:
81 lbs.
20-gauge steel door with a 24-1⁄2"W x 14-1⁄2"H opening, recessed
Freight class 85.
handle, and key lock. Two (2) keys are included. Door is attached to a
Ships ready to assemble in one (1) carton pack
full-length piano hinge so it will open 180 degrees to allow access to
CARTON DIMENSIONS & UPC CODE
stored equipment. Each lower leg has two (2) 1⁄4" diameter holes down the center of the leg so it will accept a 1⁄4-20 machine screw.
30-3/4"w x 29"d x 22-3/4"h
Each hole is 2" apart to permit table height adjustments (as noted
TVCA3654-P4: 0 96633 12303 2
above). Casters are mar-resistant Black hard rubber and 4" in
TVCA3654-E4: 0 96633 12298 1
diameter. Each caster assembly has ball bearing swivel capabilities
TVCA3654-M4: 0 96633 12301 8
and steel construction. Two (2) have locking brakes. Optional
ACCESSORIES E6
SBRT
electrical assembly provides (6) grounded outlets with surge suppression and two (2) 3⁄16" diameter machine screws with wing
Electrical assembly with 6 grounded outlets, 20 ft.
nuts for attaching unit to the table. Electrical assembly comes
grounded extension cord. [Standard on TVCA3654 “E”
standard with the TVCA3654 “E” and “M” models. TVCA3654
and “M” models.]
Adjustable TV Table ships ready to assemble in one (1) carton freight
Ratcheted 9' Safety Belt
class 85 and ship via LTL.
044-0025 Replacement 5” caster pack with 2 locking brakes
MADE IN THE USA The TVCA3654 adjustable cart is made at Bretford’s Chicago area manufacturing facility using union labor.
©2002 BRETFORD / b_adj_cart_tvca3654 / 04.10
11000 SEYMOUR AVENUE FRANKLIN PARK, ILLINOIS 60131 USA TOLL FREE PHONE 800-521-9614 PHONE 847-678-2545 TOLL FREE FAX 800-343-1779 FAX 847-678-0852 WWW.BRETFORD.COM
