Transcript
BRITISH
Receiver-Transmitter Unit Versatile Encoder Interface Features • • • • •
DIN Rail Mountable Level Changes to 5V, 12V or Vcc Signal Conditioning 2 or 3 Way Splitter Encoder Tester
The next generation of RXTX! This lightweight DIN rail mountable unit comes in a stylish green PC/ABS self-extinguishing material blend. Configurable as a level changer, line repeater, splitter or encoder tester, the RXTXD will accept PP, HV or OC encoder inputs at 5-24V and provide up to 3 outputs in any combination of PP or HV at 5V, 12V or Vcc. A series of LEDs on the front panel indicates power and signal presence. Connections are made via the easily accessible screw terminals as standard with a screw-less terminal type available on request.
Specifications Input Voltage ..........................6V to 26V Max Current Consumption .............250 mA Typical Repeater Output Voltage ........5V, 12V or Vcc Frequency Response .............Up to 800 Khz Weight ....................................250g Enclosure................................PC/ABS, IP20 Terminal ..................................Screw Type 30/12 AWG
RXTX Ordering Guide
Red type indicates price adder options. Not all configuration combinations may be available. Contact Customer Service for details.
Function RXTXD
1
VERSION 1 = Receiver/Transmitter (one output) 2 = Receiver/Transmitter (two outputs) 3 = Receiver/Transmitter (three outputs) 4 = Line repeater/refresher (one output) 5 = Level changer/conditioner (one output) 6 = Encoder signal verifier/tester (one output) Note 3 9 = Special build (SPECW) Note 4
Electrical Configuration 5V
V3 INPUT VOLTAGE V3 6-24 Vcc
Note 5
5H
AUX POWER 5V 12V 24V
24P
5H
12P
OP1
OP2
OP3
Note 1 Note 2 5H 5N 5P 12H 12N 12P 24H 24N 24P
INPUT SIGNAL 5V Differential Driver 5V NPN Open-Collector 5V Push-Pull S/Ended 12V Differential Driver 12V NPN Open-Collector 12V Push-Pull S/Ended 24V Differential Driver 24V NPN Open-Collector 24V Push-Pull S/Ended
5H 5P 12H 12P 24H 24P
OUTPUT SIGNAL 5V Differential Driver 5V Push-Pull S/Ended 12V Differential Driver 12V Push-Pull S/Ended 24V Differential Driver 24V Push-Pull S/Ended
For specification assistance call Customer Service at +44 (0)1978 262100 NOTES: 1 12V Minimum Input Voltage required. 2 Precisely 24V Input Voltage required. 3 To be used in series with encoder. 4 Contact technical sales for selection and assistance. 5 26V Maximum. 6 Aux power and output signal voltages are limited to the input voltage supplied.
Rev A
BRITISH ENCODER PRODUCTS Co , UNIT 33 WHITEGATE INDUSTRIAL ESTATE , WREXHAM , LL13 8UG , UNITED KINGDOM TEL: +44 (0)1978 262100 - FAX: +44 (0)1978 262101 - WEB: WWW.ENCODER.CO.UK - EMAIL:
[email protected]
Page 68
