Transcript
Control Systems & Boxes
control systems
449
control systems
CONTROL SYSTEMS
452
460
LumenID™
450
CONTROL BOXES & POWER SUPPLIES
Lumencue™
454
Lumentouch™
466-491
Control boxes & Power supplies
458
Lumenstudio®
Control Systems Comprehensive control solutions for any installation The Lumenpulse™ controller offering provides an intuitive and seamless path to a successful lighting installation. Lumenpulse controls follow a simple topology based on a central controller, a control box for distribution of power and data, and then the fixtures. This design philosophy is fully scalable from the very small to the very large, supporting a simple design and ease of installation consistent with the entire Lumenpulse product line. Lumenpulse is also a certified vendor of Pharos Controls, which is a DMX based control package that offers fully customizable interactivity, automation, and show scripting. These controllers are scalable from a single universe up to 200 universes of DMX over ethernet control.
lumencue™
Standalone combined USB and SD storage controller The Lumencue™ is a USB / mini SD controller that is extremely simple to use, even with no special lighting programming skills. With only a few clicks of the mouse, the included Lumenstudio® software can set all your DMX 512 channels. Once the lighting shows are transferred to the controller, they can be triggered by an external control keypad, by the internal clock/calendar, or simply by following a pre-programmed sequence. The Lumencue can be paired with Lumentouch™, and comes with Lumenstudio software, to provide a plugand-play standalone DMX 512 controller, with 2 full universes, calendar events, an astronomical clock, and remote event triggering. •
Unlimited mini SD memory
•
2 DMX universes (1024 channels)
•
Infrared receiver
•
Multi-zone
•
5 pages, 99 scenes per page
•
3-digit display
•
Compatible with Windows XP, VISTA and 7 (32-bit or 64-bit)
Dimensions
+
lumencue™ Intelligent DMX Interface
lumenpulse www.lumenpulse.com
3 1 " 2 [89mm]
Intelligent DMX Interface 3" [76mm]
1 5 " 8 [41mm]
453
lumentouch™
Touch-sensitive intelligent control keypad The Lumentouch™ lighting controller provides an intuitive interface to easily and comfortably modify lighting effects. Lumentouch has an on/off button at the top, 8 buttons to choose lighting effects, 2 buttons to cycle between pages, and a horizontal fader to instantly adjust dimmer, speed and color – making it simple to take complete control of the lighting. With all-in-one technology, Lumentouch integrates a high-tech keyboard, almost unlimited memory storage and the best DMX 512 lighting controller. Due to its elegant design, with no mechanical buttons, Lumentouch is timeless and reliable, and it can be adapted to the various sizes of recessed electrical boxes. Only a few minutes are needed to install Lumentouch. Lumentouch can be paired with Lumencue™ and Lumenstudio® to provide a plug-and-play standalone DMX 512 controller, with 2 full universes, calendar events, an astronomical clock, and remote event triggering. •
Flat wall mounted lighting controller
•
RGB LED controlled by DMX 512 lighting protocol
•
Universal mounting plate compatible with any electrical backbox
•
3-digit display
• MINI-USB connection for software programming • Can be used without a computer in standalone mode • Touch sensitive control panel • Unlimited memory via SD card • Integrated clock/calendar •
RS 232 serial and I/O ports
•
Universal infrared receiver
•
Built-in microphone for sound activation
•
Optional ethernet card and remote control
•
Supplied with Lumenstudio programming software
•
Compatible with Windows XP, VISTA and 7 (32-bit or 64-bit)
455
An LED is used to indicate whether the unit is on or off (blackout).
Buttons 1-8 are used to select individual scenes. Scenes can be static or dynamic. Double pressing buttons 1-8 will reset the dimmer, speed, and color to default.
Used to cycle between 25 different areas (A,B,C,D,E x 5). In combination with buttons 1-8, 200 different scenes can be stored.
The select button allows you to cycle through the dimmer, speed, and color fader controls. The fader at the bottom of the unit is used to adjust those three settings.
The green LED indicates that the dimmer, speed, and color settings on the Lumentouch™ are set to default. If the fader is moved to the right or left of the default (green), one of the 8 blue LED’s will indicate your current intensity level
The colorized fader of the D2 design offers a direct access to basic colors with a simple touch.
lumentouch™
Dimensions 1" 2 [13mm]
5" [127mm]
1" 2 [165mm] 6
Universal back mounting plate Hole pattern to fit most standard junction boxes
457
lumenstudio®
User friendly lighting control software The Lumenstudio® software has been specially developed for architectural lighting needs, combining many innovations with an ergonomic design. Lumenstudio includes powerful tools that are required by the latest LED fixtures, such as timelines, multi-zone, calendar, and matrix control features. Various static or dynamic sequences can be built and previewed, and these programmes can be allocated to zones within a building or space to enable unique sequences to be played in specified rooms or areas. Lumenstudio also includes a calendar feature where a time and date can be set to trigger every sequence. Lumenstudio software pairs with Lumencue™ and Lumentouch™ to enable live interaction with Lumenpulse™ fixtures. The software is designed to be easy to use for beginners and robust enough for seasoned programmers, allowing users to create fully custom shows in only a few minutes.
(Complete user manual and software available for download from our website at: www.lumenpulse.com/en/support)
459
lumenID™
Addressing and serialization solution The LumenID™ is the perfect tool for onsite work and table top demonstrations. This compact USB powered device provides a direct connection between your computer and Lumenpulse™ fixtures allowing addressing, diagnostics and demonstrations to be performed with a click of the mouse. LumenID is a USB based interface that enables quick and easy demonstration and DMX addressing of Lumenpulse fixtures. The device connects directly to a PC and, combined with the LumenID software and LumenID cable kit, provides access to the full functionality of all Lumenpulse products. When assigning DMX addresses to the Lumenpulse installation, the LumenID connects directly to the built in programming port located on each CBOX and uses the existing DMX cables to communicate directly with the fixtures.
•
USB to serial converter
•
Compact and simple demonstration tool for white DMX dimming and RGB products.
•
Serialization & addressing software provided
•
3-digit display
• Compatible with Windows XP, ME and 7 (32-bit or 64-bit)
Dimensions 1 " 2 [64mm]
1 " 16 [77mm]
2
3
1 " 2 [38mm] 1
FRONT VIEW
RIGHT VIEW
461
control systems
How to Order LCU Housing 1
1
Housing: LCU - Lumencue™
How to Order LTO Housing 1
1
Housing: LTO - Lumentouch™
463
photography by Mark Skalny
control systems
How to Order LID Housing 1
1
Housing: LID - LumenID™
465
469
CBOX
469
iCBOX
484
PSBOX & iPSBOX
474
CBOX60/100
478
iCBOX60/100
Control boxes Scalable power and data distribution In a control system’s design, a simple and scalable topology is everything. The Lumenpulse™ CBOX and PSBOX product lines provide single points for power and data distribution to the fixtures. The CBOX or PSBOX connects directly to a Lumenpulse DMX 512 controller and can daisy-chain together, allowing a fully networked system with a minimum of parts required. Family
Fixture
Related Control Boxes
LBM - Lumenbeam Medium DMX Dimming LBM RGB - Lumenbeam Medium RGB LBMP - Lumenbeam Medium Pendant DMX Dimming LBMP RGB - Lumenbeam Medium Pendant RGB LBL - Lumenbeam Large DMX Dimming Lumenbeam™ Family
LBL RGB - Lumenbeam Large RGB LBLP - Lumenbeam Large Pendant DMX Dimming
iCBOX, CBOX
LBLP RGB - Lumenbeam Large Pendant RGB LBX - Lumenbeam XLarge DMX Dimming LBX RGB - Lumenbeam XLarge RGB LBXP - Lumenbeam LBX Pendant DMX Dimming LBXP RGB - Lumenbeam LBX Pendant RGB LCS - Lumencove DMX Dimming Lumencove® Family
LCS RGB - Lumencove RGB
iCBOX, CBOX
LXC - Lumencove XC DMX Dimming LXC RGB - Lumencove XC RGB
Lumendome™ Family
LMDM - Lumendome Medium
iPSBOX60, iPSBOX100, PSBOX60, PSBOX100
LMDM - Lumendome Medium 0-10V Dimming
iPSBOX60-010, iPSBOX100-010, PSBOX60-010, PSBOX100-010
LMDM - Lumendome Medium DMX Dimming
iCBOX60, iCBOX100, CBOX60, CBOX100, iPSBOX60, iPSBOX100, PSBOX60, PSBOX100
LMDM RGB - Lumendome Medium RGB
iCBOX60, iCBOX100, CBOX60, CBOX100
LOG - Lumenfacade DMX Dimming LOG RGB - Lumenfacade RGB LOGH - Lumenfacade Horizontal DMX Dimming LOGH RGB - Lumenfacade Horizontal RGB
iCBOX, CBOX
LOGi - Lumenfacade Interior DMX Dimming Lumenfacade™ Family
LOGi RGB - Lumenfacade Interior RGB LOGP - Lumenfacade Stand Alone DMX Dimming LOGP RGB - Lumenfacade Stand Alone RGB
Lumensub
™
Lumentask
™
LOGR - Lumenfacade Remote
iPSBOX60, iPSBOX100, PSBOX60, PSBOX100
LOGR - Lumenfacade Remote 0-10V Dimming
iPSBOX60-010, iPSBOX100-010, PSBOX60-010, PSBOX100-010
LOGR - Lumenfacade Remote DMX Dimming
iCBOX60, iCBOX100, CBOX60, CBOX100, iPSBOX60, iPSBOX100, PSBOX60, PSBOX100
LOGR RGB - Lumenfacade Remote RGB
iCBOX60, iCBOX100, CBOX60, CBOX100
SLC - Lumensub Linear
PSBOX60, PSBOX100,
SLC - Lumensub Linear 0-10V Dimming
PSBOX60D, PSBOX100D
LUC - Lumentask
iPSBOX60, iPSBOX100
LUC - Lumentask 0-10V Dimming
iPSBOX60D, iPSBOX100D
LTB - Lumentube Bookshelf LTC - Lumentube Closet LTP - Lumentube Pendant Lumentube Family
®
iPSBOX60, iPSBOX100
LTT - Lumentube Table LTB - Lumentube Bookshelf 0-10V Dimming LTC - Lumentube Closet 0-10V Dimming LTP - Lumentube Pendant 0-10V Dimming
iPSBOX60D, iPSBOX100D
LTT - Lumentube Table 0-10V Dimming
Copyright © Lumenpulse 2011 Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
470
CBOX
471
iCBOX
CBOX & iCBOX
Control distribution for line voltage fixtures The CBOX and iCBOX are the perfect solutions for any installation. They provide the ability to combine the DMX and line voltage power onto Lumenpulse’s unique 5 conductor leader cables, while boosting and splitting the control signal out to other CBOXes, enabling a scalable and non-linear network topology. Easy to specify and install, the CBOX is an IP66 rated cast aluminum enclosure with a powder coat finish which can be customized to match project aesthetics. The iCBOX is the interior version, designed to be light and easy to install in any interior architectural application. • IP66 for outdoor applications • Up to six outputs to fixtures • Mounting hardware included • 120 to 277V input
Family
Fixture
Related Control Boxes
LBM - Lumenbeam Medium DMX Dimming LBM RGB - Lumenbeam Medium RGB LBMP - Lumenbeam Medium Pendant DMX Dimming LBMP RGB - Lumenbeam Medium Pendant RGB LBL - Lumenbeam Large DMX Dimming Lumenbeam™ Family
LBL RGB - Lumenbeam Large RGB LBLP - Lumenbeam Large Pendant DMX Dimming
iCBOX, CBOX
LBLP RGB - Lumenbeam Large Pendant RGB LBX - Lumenbeam XLarge DMX Dimming LBX RGB - Lumenbeam XLarge RGB LBXP - Lumenbeam LBX Pendant DMX Dimming LBXP RGB - Lumenbeam LBX Pendant RGB LCS - Lumencove DMX Dimming Lumencove® Family
LCS RGB - Lumencove RGB LXC - Lumencove XC DMX Dimming
iCBOX, CBOX
LXC RGB - Lumencove XC RGB Lumendome™ Family
LMDM - Lumendome Medium DMX Dimming LMDM RGB - Lumendome Medium RGB
iCBOX60, iCBOX100, CBOX60, CBOX100
LOG - Lumenfacade DMX Dimming LOG RGB - Lumenfacade RGB LOGH - Lumenfacade Horizontal DMX Dimming LOGH RGB - Lumenfacade Horizontal RGB
iCBOX, CBOX
LOGi - Lumenfacade Interior DMX Dimming Lumenfacade™ Family
LOGi RGB - Lumenfacade Interior RGB LOGP - Lumenfacade Stand Alone DMX Dimming LOGP RGB - Lumenfacade Stand Alone RGB LOGR - Lumenfacade Remote DMX Dimming LOGR RGB - Lumenfacade Remote RGB
iCBOX60, iCBOX100, CBOX60, CBOX100
Copyright © Lumenpulse 2011 Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
469
CBOX
Dimensions
9 5 16 " [141mm]
7 7 8 " [200mm]
5 3 " 8 [92mm]
Typical Daisy Chain Layout CBOX Input and Output Details
POWER & DATA OUTPUTS TO FIXTURES 5C/CABLE or DATA OUTPUT
POWER INPUT DATA INPUT
Typical Star Layout
CBOX Input and Output Details
POWER & DATA OUTPUTS TO FIXTURES 5C/CABLE or DATA OUTPUT
POWER INPUT DATA INPUT
POWER & DATA OUTPUTS TO FIXTURES (UP TO 4x) 5C/CABLE
470
iCBOX
Dimensions 8" [203mm]
4 1 " 16 [103mm]
2" [51mm] 2" [51mm]
Typical Daisy Chain Layout iCBOX Input and Output Details
POWER INPUT (120-277V) 3C/CABLE
POWER & DATA OUTPUTS TO FIXTURES 5C/CABLE or DATA OUTPUT
DATA INPUT KNOCKOUT SIZES ON ALL SIDES: 2x CONDUIT 1/2” 2x CONDUIT 3/4”
Typical Star Layout iCBOX Input and Output Details POWER & DATA OUTPUTS TO FIXTURES 5C/CABLE or DATA OUTPUT
POWER INPUT (120-277V) 3C/CABLE
POWER & DATA OUTPUTS TO FIXTURES 5C/CABLE or DATA OUTPUT
DATA INPUT
KNOCKOUT SIZES ON ALL SIDES: 2x CONDUIT 1/2” 2x CONDUIT 3/4”
POWER & DATA OUTPUTS TO FIXTURES 5C/CABLE or DATA OUTPUT
*Strain relief connectors and cables by others 471
control boxes
Finish - CBOX
SI - Silver SandText
BK - Black SandText
Finish - iCBOX
GT - Standard Grey Polyester
472
CC - Custom
WH - White SandText
CC - Custom
control boxes
How to Order CBOX
Housing
Input Voltage
Layout
Finish
1
2
3
4
1
3
Housing:
Layout:
CBOX - Control box for outdoor applications
ST - Star configuration DS - Daisy chain configuration
2
4
Input Voltage:
Finish:
120 - 120 volts 208 - 208 volts
SI - Silver SandText
240 - 240 volts
BK - Black SandText
277 - 277 volts
WH - White CC - Custom (please specify RAL color)
How to Order iCBOX
Housing
Input Voltage
Output Voltage
Finish
1
2
3
4
1
3
Housing:
Layout:
iCBOX - Control box for indoor applications
ST - Star configuration DS - Daisy chain configuration
2
Input Voltage: 120 - 120 volts
4
Finish:
208 - 208 volts
GT - Standard grey polyester - epoxy textured
240 - 240 volts
CC - Custom (please specify RAL color)
277 - 277 volts
473
476
CBOX60/100
478
iCBOX60/100
CBOX60/100 & iCBOX60/100
Control distribution for low voltage fixtures For installations using remote driver DMX controlled Lumenpulse™ fixtures, the CBOX60/100 and iCBOX60/100 combine the same versatility and quality design of the CBOX products. They also have an LED driver, either 60 or 100 watts, to power the remote fixtures while offering easy access maintenance when access to the fixture is limited. •
IP66 die-cast aluminum enclosure for outdoor applications
• Up to six outputs to fixtures • Mounting hardware included • 120 to 277V input
Family
Fixture
Lumendome™ Family
LMDM - Lumendome Medium DMX Dimming
Lumenfacade™ Family
LOGR - Lumenfacade Remote DMX Dimming
LMDM RGB - Lumendome Medium RGB
LOGR RGB - Lumenfacade Remote RGB
Related Control Boxes iCBOX60, iCBOX100, CBOX60, CBOX100
iCBOX60, iCBOX100, CBOX60, CBOX100
Copyright © Lumenpulse 2011 Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
475
CBOX60
Dimensions
9 5 16 " [141mm]
7 7 8 " [200mm]
5 3 " 8 [92mm]
Typical Layout CBOX60 Input and Output Details
• OUTPUT QUANTITY DEPENDS ON PROJECT LAYOUT.
POWER INPUT (120-277V) 3C/CABLE
24V LOW VOLTAGE & DATA OUTPUT 4C/CABLE or DATA OUTPUT
DATA INPUT
• UP TO 6 OUTPUTS TO FIXTURES. • ADD UP ALL FIXTURE RUN LOADS AND BE SURE THEY DO NOT EXCEED THE CAPACITY OF THE CBOX .
24V LOW VOLTAGE & DATA OUTPUTS 4C/CABLE
*Strain relief connectors and cables by others 476
CBOX100
Dimensions
TOP 1 " 16 [230mm]
1 11 " 16 [280mm]
9
3 " 8 [111mm] 4
FRONT
RIGHT
Typical Layout CBOX100 Input and Output Details
• OUTPUT QUANTITY DEPENDS ON PROJECT LAYOUT.
POWER INPUT (120-277V) 3C/CABLE
24V LOW VOLTAGE & DATA OUTPUT 4C/CABLE or DATA OUTPUT
DATA INPUT
• UP TO 6 OUTPUTS TO FIXTURES. • ADD UP ALL FIXTURE RUN LOADS AND BE SURE THEY DO NOT EXCEED THE CAPACITY OF THE CBOX .
24V LOW VOLTAGE & DATA OUTPUTS 4C/CABLE
*Strain relief connectors and cables by others 477
iCBOX60
Dimensions 8" [204mm]
4" [102mm]
FRONT 6" [153mm]
6" [153mm]
TOP
RIGHT
Typical Layout iCBOX60 Input and Output Details 24V LOW VOLTAGE & DATA OUTPUTS 4C/CABLE
24V LOW VOLTAGE &
POWER INPUT (120-277V)
DATA OUTPUT
3C/CABLE
4C/CABLE
• OUTPUT QUANTITY DEPENDS ON PROJECT LAYOUT. • UP TO 6 OUTPUTS TO FIXTURES.
24V LOW VOLTAGE & DATA OUTPUT
DATA INPUT
4C/CABLE
• ADD UP ALL FIXTURE RUN LOADS AND BE SURE THEY DO NOT EXCEED THE CAPACITY OF THE iCBOX .
KNOCKOUT SIZES: 2x CONDUIT 1/2” 1x CONDUIT 3/4”
24V LOW VOLTAGE & DATA OUTPUTS 4C/CABLE
*Strain relief connectors and cables by others 478
iCBOX100
Dimensions 10" [254mm]
4" [102mm]
FRONT 8" [204mm]
8" [204mm]
TOP
RIGHT
Typical Layout iCBOX100 Input & Output Details 24V LOW VOLTAGE & DATA OUTPUTS 4C/CABLE
24V LOW VOLTAGE &
POWER INPUT (120-277V)
DATA OUTPUT
3C/CABLE
4C/CABLE
• OUTPUT QUANTITY DEPENDS ON PROJECT LAYOUT. • UP TO 6 OUTPUTS TO FIXTURES. • ADD UP ALL FIXTURE RUN
24V LOW VOLTAGE & DATA OUTPUT
DATA INPUT
4C/CABLE
LOADS AND BE SURE THEY DO NOT EXCEED THE CAPACITY OF THE iCBOX .
KNOCKOUT SIZES: 2x CONDUIT 1/2” 1x CONDUIT 3/4”
24V LOW VOLTAGE & DATA OUTPUTS 4C/CABLE
*Strain relief connectors and cables by others 479
control boxes
Finish - CBOX60, CBOX100
SI - Silver SandText
BK - Black SandText
Finish - iCBOX60, iCBOX100
GT - Standard Grey Polyester
480
CC - Custom
WH - White SandText
CC - Custom
control boxes
How to Order CBOX60
Housing
Input Voltage
Output Voltage
Finish
1
2
3
4
1
3
Housing:
Output Voltage:
CBOX60 - DMX 512 power & data box 60W 2 separate inputs for line voltage & data Up to (6) output(s) for low voltage power & data combined
24V - 24V DC 15V - 15V DC (Lumenfacade™ Remote RGB fixture only)
4
2
Input Voltage:
Finish:
120 - 120 volts
SI - Silver SandText
208 - 208 volts
BK - Black SandText
240 - 240 volts
WH - White SandText
277 - 277 volts
CC - Custom (please specify RAL color)
How to Order CBOX100
Housing
Input Voltage
Output Voltage
Finish
1
2
3
4
1
3
Housing:
Output Voltage:
CBOX100 - DMX 512 power & data box 100W 2 separate inputs for line voltage & data Up to (6) output(s) for low voltage power & data combined
24V - 24V DC 15V - 15V DC (Lumenfacade™ Remote RGB fixture only)
4
2
Input Voltage:
Finish:
120 - 120 volts
SI - Silver SandText
208 - 208 volts
BK - Black SandText
240 - 240 volts
WH - White SandText
277 - 277 volts
CC - Custom (please specify RAL color)
481
control boxes
How to Order iCBOX60
Housing
Input Voltage
Output Voltage
Finish
1
2
3
4
1
3
Housing:
Output Voltage:
iCBOX60 - Interior DMX 512 power & data box 60W 2 separate inputs for line voltage & data Up to (6) output(s) for low voltage power & data combined
24V - 24V DC 15V - 15V DC (Lumenfacade™ Remote RGB fixture only)
4
2
Input Voltage:
Finish:
120 - 120 volts
GT - Standard grey polyester - epoxy textured
208 - 208 volts
CC - Custom (please specify RAL color)
240 - 240 volts 277 - 277 volts
How to Order iCBOX100
Housing
Input Voltage
Output Voltage
Finish
1
2
3
4
1
3
Housing:
Output Voltage:
iCBOX100 - Interior DMX 512 power & data box 100W 2 separate inputs for line voltage & data Up to (6) output(s) for low voltage power & data combined
15V - 15V DC (Lumenfacade™ Remote RGB fixture only)
4
2
Input Voltage:
Finish:
120 - 120 volts
GT - Standard grey polyester - epoxy textured
208 - 208 volts
CC - Custom (please specify RAL color)
240 - 240 volts 277 - 277 volts
482
24V - 24V DC
photography by Marc Cramer
486
PSBOX60/60D/60-010
487
PSBOX100/100D/100-010
488
iPSBOX60/60D/60-010
489
iPSBOX100/100D/100-010
PSBOX & iPSBOX
Contained low voltage power and dimming box The Lumenpulse™ PSBOX product line eliminates the need for complicated wiring of low voltage electronics and replaces it with a contained and easy to install box that is used to power and dim our low voltage fixtures. For indoor applications or outdoor use, the PSBOX is designed to meet the needs of the application. The PSBOX100 is an IP66 rated enclosure with a customizable powder coat finish that can have up to 6 outputs to up to 100 watts worth of our low voltage fixtures. The iPSBOX60D is designed specifically for interior applications and provides the additional 0-10V dimming capabilities. •
IP66 die-cast aluminum enclosure for outdoor applications
•
Electro-statically applied polyester powder coat finish
• Up to six outputs to fixtures • Mounting hardware included • 120 to 277V input • 0-10V dimming option
Family Lumendome™ Family Lumenfacade™ Family Lumensub™ Lumentask™
Fixture
Related Control Boxes
LMDM - Lumendome Medium
iPSBOX60, iPSBOX100, PSBOX60,PSBOX100
LMDM - Lumendome Medium 0-10V Dimming
iPSBOX60-010, iPSBOX100-010, PSBOX60-010, PSBOX100-010
LMDM - Lumendome Medium DMX Dimming
iPSBOX60, iPSBOX100, PSBOX60,PSBOX100
LOGR - Lumenfacade remote
iPSBOX60, iPSBOX100, PSBOX60, PSBOX100
LOGR - Lumenfacade remote 0-10V Dimming
iPSBOX60-010, iPSBOX100-010, PSBOX60-010, PSBOX100-010
LOGR - Lumenfacade remote DMX Dimming
iPSBOX60, iPSBOX100, PSBOX60, PSBOX100
SLC - Lumensub Linear
PSBOX60, PSBOX100
SLC - Lumensub Linear 0-10V Dimming
PSBOX60D, PSBOX100D
LUC - Lumentask
iPSBOX60, iPSBOX100
LUC - Lumentask 0-10V Dimming
iPSBOX60D, iPSBOX100D
LTB - Lumentube Bookshelf LTC - Lumentube Closet
iPSBOX60, iPSBOX100
LTP - Lumentube Pendant Lumentube® Family
LTT - Lumentube Table LTB - Lumentube Bookshelf 0-10V Dimming LTC - Lumentube Closet 0-10V Dimming LTP - Lumentube Pendant 0-10V Dimming
PSBOX60D, iPSBOX100D
LTT - Lumentube Table 0-10V Dimming
Copyright © Lumenpulse 2011 Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
485
PSBOX60/60D/60-010
Dimensions
TOP 9 5 16" [141mm]
7 78" [200mm]
5 8" [92mm] 3
FRONT
RIGHT
Typical Layout PSBOX60 & PSBOX60D
• OUTPUT QUANTITY DEPENDS 24V LOW VOLTAGE TO FIXTURES or DIMMING SIGNAL OUTPUT 2C/CABLE
POWER INPUT (120-277V) 3C/CABLE DIMMING SIGNAL INPUT (OPTIONAL)
ON PROJECT LAYOUT.
• UP TO 6 OUTPUTS TO FIXTURES.
• ADD UP ALL FIXTURE RUN LOADS AND BE SURE THEY DO NOT EXCEED THE CAPACITY OF THE PSBOX .
24V LOW VOLTAGE OUTPUTS TO FIXTURES 2C/CABLE
PSBOX60-010
24V LOW VOLTAGE & DIMMING SIGNAL OUTPUTS (4C/CABLE) or
POWER INPUT (120-277V) 3C/CABLE
DIMMING SIGNAL OUTPUT 2C/CABLE
DIMMING SIGNAL INPUT (REQUIRED)
24V LOW VOLTAGE & DIMMING SIGNAL OUTPUTS TO FIXTURES 4C/CABLE
*Strain relief connectors and cables by others 486
PSBOX100/100D/100-010
Dimensions
TOP 1 9 16" [230mm]
1 11 16 " [280mm]
3 4 " 8 [111mm]
FRONT
RIGHT
Typical Layout PSBOX100 & PSBOX100D
• OUTPUT QUANTITY DEPENDS 24V LOW VOLTAGE TO FIXTURES or DIMMING SIGNAL OUTPUT 2C/CABLE
POWER INPUT (120-277V) 3C/CABLE DIMMING SIGNAL INPUT (OPTIONAL)
ON PROJECT LAYOUT. • UP TO 6 OUTPUTS TO FIXTURES. • ADD UP ALL FIXTURE RUN LOADS AND BE SURE THEY DO NOT EXCEED THE CAPACITY OF THE PSBOX .
24V LOW VOLTAGE OUTPUTS TO FIXTURES 2C/CABLE
PSBOX100-010
24V LOW VOLTAGE & DIMMING SIGNAL OUTPUTS (4C/CABLE or DIMMING SIGNAL OUTPUT 2C/CABLE
POWER INPUT (120-277V) 3C/CABLE DIMMING SIGNAL INPUT (REQUIRED)
24V LOW VOLTAGE & DIMMING SIGNAL OUTPUTS TO FIXTURES 4C/CABLE
*Strain relief connectors and cables by others 487
iPSBOX60/60D/60-010
Dimensions 8" [203mm]
4 1" 16 [103mm]
FRONT
2" [51mm]
2" [51mm]
TOP
RIGHT
Typical Layout iPSBOX60 & iPSBOX60D 24V LOW VOLTAGE OUTPUTS TO FIXTURES 2C/CABLE
POWER INPUT (120-277V) 3C/CABLE
• OUTPUT QUANTITY DEPENDS
24V LOW VOLTAGE OUTPUTS TO FIXTURES 2C/CABLE DATA INPUT 2C/CABLE
ON PROJECT LAYOUT.
• UP TO 6 OUTPUTS TO FIXTURES.
• ADD UP ALL FIXTURE RUN
24V LOW VOLTAGE OUTPUTS TO FIXTURES 2C/CABLE or DATA OUTPUT
KNOCKOUT SIZES ON ALL SIDES: 2x CONDUIT 1/2” 2x CONDUIT 3/4”
LOADS AND BE SURE THEY DO NOT EXCEED THE CAPACITY OF THE iPSBOX .
iPSBOX60-010 24V LOW VOLTAGE & DIMMING SIGNAL OUTPUTS TO FIXTURES 4C/CABLE
POWER INPUT (120-277V) 3C/CABLE
24V LOW VOLTAGE & DIMMING SIGNAL OUTPUTS TO FIXTURES 4C/CABLE
DATA INPUT 2C/CABLE
24V LOW VOLTAGE & DIMMING SIGNAL OUTPUTS TO FIXTURES 4C/CABLE or DATA OUTPUT
KNOCKOUT SIZES ON ALL SIDES: 2x CONDUIT 1/2” 2x CONDUIT 3/4”
*Strain relief connectors and cables by others 488
iPSBOX100/100D/100-010
Dimensions 10" [254mm]
4 1 " 16 [103mm]
FRONT
2" [51mm]
2" [51mm]
TOP
RIGHT
Typical Layout iPSBOX100 & iPSBOX100D 24V LOW VOLTAGE & DATA OUTPUTS 4C/CABLE
POWER INPUT (120-277V) 3C/CABLE
• OUTPUT QUANTITY DEPENDS
24V LOW VOLTAGE OUTPUTS TO FIXTURES 2C/CABLE DATA INPUT
24V LOW VOLTAGE OUTPUTS TO FIXTURES 2C/CABLE or DATA OUTPUT
KNOCKOUT SIZES ON ALL SIDES: 2x CONDUIT 1/2” 1x CONDUIT 3/4”
ON PROJECT LAYOUT.
• UP TO 6 OUTPUTS TO FIXTURES.
• ADD UP ALL FIXTURE RUN LOADS AND BE SURE THEY DO NOT EXCEED THE CAPACITY OF THE iPSBOX .
iPSBOX100-010 24V LOW VOLTAGE & DIMMING SIGNAL OUTPUTS TO FIXTURE 4C/CABLE
POWER INPUT (120-277V) 3C/CABLE 24V LOW VOLTAGE & DIMMING SIGNAL OUTPUTS TO FIXTURES 4C/CABLE DATA INPUT 2C/CABLE
24V LOW VOLTAGE & DIMMING SIGNAL OUTPUTS TO FIXTURE 4C/CABLE or DATA OUTPUT
KNOCKOUT SIZES ON ALL SIDES: 2x CONDUIT 1/2” 2x CONDUIT 3/4”
*Strain relief connectors and cables by others 489
control boxes
How to Order PSBOX
Housing
Input Voltage
Finish
1
2
3
1
Housing: PSBOX60 - Remote class 2 power supply 60W with enclosure for outdoor applications PSBOX60D - Remote class 2 power supply 60W with dimming module (120-277V to 24V DC) and enclosure for outdoor applications PSBOX60-010 - Remote class 2 power supply 60W (120-277V- 24V DC) and outdoor rated enclosure, 0-10V dimming enabled PSBOX100 - Remote class 2 power supply 100W with enclosure for outdoor applications PSBOX100D - Remote class 2 power supply 100W with dimming module (120-277V to 24V DC) and enclosure for outdoor applications PSBOX100-010 - Remote class 2 power supply 100W (120-277V to 24V DC) and outdoor rated enclosure, 0-10V dimming enabled
2
Input Voltage: 120 - 120 volts 208 - 208 volts 240 - 240 volts 277 - 277 volts
3
Finish: SI - Silver SandText BK - Black SandText WH - White SandText CC - Custom (please specify RAL color)
490
control boxes
How to Order iPSBOX
Housing
Input Voltage
Finish
1
2
3
1
Housing: iPSBOX60 - Interior remote class 2 power supply 60W (120-277V to 24V DC) and enclosure for indoor applications iPSBOX60D - Interior remote class 2 power supply 60W (120-277V to 24V DC) with dimming module and enclosurefor indoor applications iPSBOX60-010 - Interior remote class 2 power supply 60W (120-277V to 24V DC) and indoor rated enclosure, 0-10V dimming enabled iPSBOX100 - Interior remote class 2 power supply 100W (120-277V to 24V DC) and enclosure for indoor applications iPSBOX100D - Interior remote class 2 power supply 100W (120-277V to 24V DC) with dimming module and enclosure for indoor applications iPSBOX100-010 - Interior remote class 2 power supply 100W (120-277V to 24V DC) and indoor rated enclosure, 0-10V dimming enabled
2
Input Voltage: 120 - 120 volts 208 - 208 volts 240 - 240 volts 277 - 277 volts
3
Finish: GT - Standard grey polyester - epoxy textured CC - Custom (please specify RAL color)
491
photography by Miller+Miller
photography by Marc Cramer
A global presence LUMENPULSE™ provides comprehensive customer service for projects worldwide. For North America, Lumenpulse™ is represented by a network of highly qualified representatives across the continent. Close contact with our representatives, Regional Sales Managers and headquarters in Montreal ensures quick service for architects, lighting designers and lighting specifiers in every stage of the project. Contact your local LUMENPULSE™ sales representative or visit the LUMENPULSE™ web site at www.lumenpulse.com Corporate Headquarters
US Headquarters
EMEA Sales Headquarters
1751 Richardson, Suite 1505 Montreal, QC Canada H3K 1G6 1.877.937.3003 P 514.937.3003 F 514.937.6289
268 Summer Street, 2nd Floor Boston, MA 02210 USA P 617.307.5700 F 617.350.9912
Unit 13.3.2 The Leathermarket 11/13 Weston Street Bermondsey, London UK SE1 3ER
[email protected] www.lumenpulse.com
A tool to quickly find... The LUMENPULSE™ official website www.lumenpulse.com has distinctive sections in which it is possible to find information on products, projects in which we have participated, current updates, technical information, downloads, product specification and photometric data.
Lumenpulse, Lumenbeam, Lumencove, Lumencue, Lumendome, Lumenedge, Lumenfacade, LumenfacadeFX, LumenID, Lumenstudio, Lumensign, Lumensub, Lumentask, Lumentouch, and Lumentube are either registered trademarks or trademarks of Lumenpulse Lighting, Inc. in the United States and / or other countries. Copyright © Lumenpulse 2011 Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
