Transcript
g
GE Security
Product Data Sheet
GS115 Test Unit for Glassbreak detectors Glass Break Tester The tester GS115 is used to verify the operation of the glued-on-glass glass break detectors GS110/200. You test the detector by pressing the tester against the window. A noise will be heard simulating a glass breakage. It is recommended to test the glass break detectos before and after the installation. Please note that this is not a range tester.
Standard Features E Hand held glass break tester E 9V battery
GS115 Test Unit for Glassbreak detectors
Specifications Power supply Current consumption
10 to 15 VDC
Standby
10 mA nominal at 12 VDC
Alarm
26 mA nominal at 12 V
Alarm output Detection range Cable length Operating temperature Dimensions Weight Colour
NC relay 100 mA at 28 VDC (fail safe) 2 m radius 3.0 m -40 to +70°C 28 x 28 x 15 mm 28 g White
Ordering Information Part No.
Description
GS115
Test Unit for Glassbreak detectors
g
www.gesecurity.net
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GE Security online or contact your GE Security sales representative. IPS-GS115-2008-12-4 16:13:01 Released : 09.05.2007;
