Transcript
AURORA 380 SERIES ®
SINGLE STAGE SPLIT COUPLED VERTICAL INLINE PUMP WWW.AURORAPUMP.COM
SINGLE STAGE VERTICAL INLINE PUMP
AURORA 380 SERIES ®
Single Stage Vertical Inline Pump Capacities to 12,000 gpm (2,725 m3/hr) Heads to 370 feet (78 m) Temperatures to 250° F (120° C) 380 Series Pumps
Vertical Inline Split Coupled Pumps are specifically designed for mounting directly in a pipeline. The suction and discharge nozzles are located on the same centerline, 180º apart. Vertical pumps significantly reduce the space required; two pumps fit in the space of one. They are easy to maintain; the seals can be changed without disturbing the motor or removing the casing, The proprietary jacking mechanisms eases the changing of the mechanical seal making this repair chore faster and easier for the maintenance specialist, no lifting equipment required. A carbon throttle bushing controls the flow of mechanical seal flushing while providing additional support for the stainless steel pump shaft. The Aurora® 382A-SC and 382B-SC inline pumps come in 37 sizes, offering a size and model precisely fitted for a wide range of head and capacity requirements. The inline casing has provisions for mounting an optional support base should the pump sit on the floor. Mechanical seals are provided as standard to prevent leakage around the shaft. A relief line is provided from the seal faces to the pump discharge for flushing and venting purposes. Suction branch design on Model 382A-SC and 382B-SC pumps pre-rotates suction liquid in the direction of pump impeller rotation. This concept minimizes pumping noise that is otherwise associated with more common short radius suction inlet designs. Each pump has been engineered and assurance tested to arrive at the proper velocities and entrance angles to ensure quiet operation. Look through this bulletin for additional details and specifications.
2
SINGLE STAGE VERTICAL INLINE PUMP
382A Split Coupled Inline Pump Features A.
Back Pull-Out Casing
B.
Case Wearing Ring
C.
includes inline suction and discharge.
prevents wear on casing and is inexpensively replaced. Impeller wear rings are optional.
Precision Cast, Dynamically Balanced, Enclosed Impeller
keyed to the shaft extension and secured by a capscrew and washer. Gaskets are used to prevent leakage to shaft end.
D.
Stainless Steel Shaft
E.
Mechanical Seal
H
E
designed for minimum deflection.
D
K
F
has carbon against ceramic face for optimum hot water performance. Long life is assured with 303 SST metal parts and Buna-N flexible elastomers.
C
Factory Hydro Test
G.
Relief Line
H.
Standard P-Base Motor
382A Split Coupled Inline Pump
I.
Volute Type Suction
Standard Features
assures adequate venting of the seal chamber and lubrication of seal faces.
provides low noise level pump operation.
inlet pre-rotates suction liquid.
Double Volute
K.
Proprietary Jacking Mechanism
I
guarantees casting and seal integrity.
J.
G
B
J
F.
A
inlet pre-rotates suction liquid, and minimizes side load on shaft extending mechanical seal life (8 x8 x15 and 10 x10 x15).
simplifies seal replacement – one person operation.
WWW.AURORAPUMP.COM
• Factory hydro test • Casing wearing rings • Bronze fitted construction • High strength aluminum coupling • Dynamically balanced cast impeller • 303 SST mechanical seal with Buna-N, ceramic and carbon parts
Optional Features • Pump base • Impeller wearing rings • High temperature mechanical seal • Certified performance testing over the full operating range of the pump
3
SINGLE STAGE VERTICAL INLINE PUMP
382B Split Coupled Inline Pump Features A.
Back Pull-Out Casing
B.
Case Wearing Ring
C.
Investment Cast, Dynamically Balanced, Enclosed Impeller
H
A
E
prevents wear on casing and is inexpensively replaced. Impeller wear rings are optional.
keyed to the shaft extension and secured by a capscrew and washer. Gaskets are used to prevent leakage to shaft end.
D.
Stainless Steel Shaft
E.
Mechanical Seal
F.
Factory Hydro Test
G.
Relief Line
H.
Standard C-Face Motor
382B Split Coupled Inline Pump
I.
Volute Type Suction
• Factory hydro test • Casing wear rings • Investment cast SST impeller • Stainles steel shaft • Dynamically balanced cast impeller • 303 SST mechanical seal with Buna-N, ceramic and carbon parts
J.
Double Volute
K.
Proprietary Jacking Mechanism
L.
Ductile Iron Casing
K
G
D B
C
F
J L I
Standard Features
4
includes inline suction and discharge.
Optional Features • Pump base • Impeller wearing rings • Outside balanced seal • High temperature mechanical seal • Certified performance testing over the full operating range of the pump
designed for minimum deflection.
has carbon against ceramic face for optimum hot water performance. Long life is assured with 303 SST metal parts and Buna-N flexible elastomers (outside balanced seal optional).
guarantees casting and seal integrity.
assures adequate venting of the seal chamber and lubrication of seal faces.
provides low noise level pump operation.
inlet pre-rotates suction liquid.
minimizes side load on shaft extending mechanical seal life.
simplifies seal replacement – one person operation.
long life with higher working pressures.
SINGLE STAGE VERTICAL INLINE PUMP
Pump Performance 3600 RPM Composite Chart
500 400 2.5x
3x3
x9B 4x
4x
9 4x 3x
2x2 x7
4x5 x
9 7A
x9B
3x
x7 B 3 x3
3x
4x4
80
x7B
x7A
4x4
100 Head (ft)
9A
2.5x 2.5x 7
4x4
200
9
3x3x9A
2.5x
2x2 x9C
300
60 50 40 30
20
10 30
50
100
200
300
500
1000
2000
Flow (GPM)
1800 RPM Composite Chart
500 400 10x10x19
300
12
18
14x
15
10x10x15
x11
8x8
x9 6x6
2.
9A
4x
x12 8x8
3x4x9
5x
9B
4x
5x
7
7A
4x4x
7A 3x3x
20
4x
4x
7B 3x3x
30
2.
9
9
2x 2x 7
11
4x
5x 5x
40
.5x
4x5x9
3x3x9A
9B 2x 9A 2x 2x 9C 2x 2x
60 50
4x4x
3x3x9B
x2
12
x11 6x6
2.5
2x
9B
5x
12
1.5x
5x
11 5x 5x
1.5x
80
x12
6x 6x
100
4x 4x 12
3x3
18
x1
14 2x x1 12 14 0x x1 10
2x2 x12
2x
14
14x
200
7B
4x4x
Head (ft)
x1
8x8x15
10 8 6 5 4 3 2
1
10
20
30
50
100
200
300
500
Flow (GPM)
WWW.AURORAPUMP.COM
1000
2000
5000
12500 1000015000
5
SINGLE STAGE VERTICAL INLINE PUMP
Pump Performance 1200 RPM Composite Chart
300 200 10x10x19
12
x1
100 80 x12
5x
5x
Head (ft)
14 12x 12x
x12
9
6x6x
8x8x11
9 5x 5x
20
8x8
30
4 x1
x11
10x10x15
4x4
40
12
12 6x 6x 11 6x 6x 11 5x 5x
50
4x4
18
0 x1
3x3 x12
2x
10
2x2 x12
60
14x14x15
18 14x 14x
8x8x15
10 8 6 5 4 3 2
10
20
30
50
100
200
300
500
1000
2000
5000
10000
Flow (GPM)
3000 RPM Composite Chart
200
100 2.5x
2.5x 9
50
9A
3x
3x
7A
4x
5x
9
2.5x 2.5x 7
4x 7B
7A
4x
4x
20
4x
Head (m)
4x
7B 3x 3x
30
4x
3x4x9
B
2x2x 7
x9B
4x 9
40
3x3
4x
2x2x 9C
60
3x3x9A
80
10 8 6 5 4 3 2
10
20
30
50 Flow (m3/hr)
6
100
200
300
SINGLE STAGE VERTICAL INLINE PUMP
Pump Performance 1500 RPM Composite Chart
80
10x10x19
60
x1
5x
5x
12
12 8x8x 1 8x8x1 1 6x6x1
x9B 1.5x1. 5
x12
9
x9
5x5
5x
3x4x9
2x2x9C
x9B 4x4
4x
10
9B
3x3x9A
9B 2x 2x 9A
x11
3x3x
11
2x
9 5x 2. 5x 2.
2x
x 5x5
20
6x6
4x4
9A
.5x 7
6
6x6x9
30
4x4x
2.5
20
x2
7 2x 2x
8
B 4x4x7
A 3x3x7
4
A 4x4x7
B 3x3x7
5
18 14x 14x 14 12x 12x
4x 4x 12
3x 3x 12
14 10x 10x
2x 2x 12
30
18
15
18 14x 14x
2x
10x10x
40
Head (m)
12
8x8x15
50
3 2
1
2
3
5
10
50
100
200
300
500
1000
2000 3000
Flow (m3/hr)
1000 RPM Composite Chart
200
100
10x10x19
80
12
x15 8x8
5x
5x
40
6x
11
x 8x8
12x12x14
12
5x5x9
11
2
6x
5x
1 6x
5x
12
6x
4x4x11
30 20
8x8x11
Head (m)
18
18
4x4x12
2x
4x
3x3x12
2x2x12
10x10x14
14x14x15
x1
10x10x15
14
x1
60 50
6x6x9
10 8 6 5 4 3 2
1
10
20
30
50
100
200
300
500
1000
2000
5000
8000
Flow (m3/hr)
WWW.AURORAPUMP.COM
7
SINGLE STAGE VERTICAL INLINE PUMP
382 Split Coupled Engineering and Dimension Details HP Dimension Table
DH
FRAME 143
P 8 (203)
AG 11 (279)
145
8 (203)
12 (305)
182
10 (254)
14 (356)
184
10 (254)
15 (381)
213
11 (279)
16 (406)
215
11 (279)
17 (432)
254
13 (330)
20 (508)
256
13 (330)
21 (534)
284
16 (406)
22 (559)
286
16 (406)
23 (584)
324
18 (457)
25 (635)
326
18 (457)
26 (660)
364
21 (534)
25 (635)
365
21 (534)
25 (635)
404
22 (559)
28 (711)
405
22 (559)
28 (711)
444
24 (610)
32 (813)
445
24 (610)
32 (813)
Pump Size 1-1/2x1-1/2x9B 2x2x7 2x2x9A & B 2x2x9C 2x2x12 2-1/2x2-1/2x7 2-1/2x2-1/2x9 3x3x7A & B 3x3x9A 3x3x9B 3x4x9 3x3x12
YY
X
DC
DE
4x4x7A & B 4x4x9A & B 4x5x9
AG
4x4x11 SUCTION
4x4x12
DISCHARGE DH
5x5x9
YD
CASING FEET TAPPING
5x5x11 5x5x12
NOTES: 1. All dimensions in inches and (mm). 2. Dimensions may vary ± 1/4" (6). 3. Not for construction purposes unless certified. 4. N/A = Not Applicable. 5. Conduit box is shown in approximate location. Dimensions are not specified as they vary with each motor manufacturer. 6. Suction and discharge flanges – 125 lb. ANSI Standard flat face. 7. Normally not tapped. Optionally available [4] 5/8" UNC taps matching 4"-125 lb. flange drilling (7.5" bolt circle). 8. Tapped [4] 5/8" UNC taps matching 2"-125 lb. flange (4.75" bolt circle). 9. Tapped [4] 5/8" UNC taps matching 3"-125 lb. flange (6.0" bolt circle). 10. Tapped [4] 5/8" UNC taps matching 4"-125 lb. flange (7.5" bolt circle). 11. Tapped [4] 3/4" UNC taps matching 6"-125 lb. flange (9.5" bolt circle).
8
6x6x9 6x6x11 6x6x12 8x8x11 8x8x12 8x8x15 10x10x15
X 9-1/2 (241) 8 (203) 9-1/2 (241) 9-1/2 (241) 12 (305) 9 (229) 10 (254) 9-1/2 (241) 11 (279) 11 (279) 11 (279) 14 (356) 11 (279) 11 (279) 11 (279) 13 (330) 13 (330) 14 (356) 14 (356) 15 (381) 15 (381) 15 (381) 15 (381) 18 (457) 18 (457) 22-1/2 (572) 25 (635)
DC 5-3/4 (146) 4-1/2 (114) 5-7/8 (149) 5-7/8 (149) 7-5/8 (194) 4-3/4 (121) 5-7/8 (149) 5-3/16 (132) 6 (152) 6-1/4 (159) 5-3/4 (146) 7-11/16 (195) 5-9/16 (141) 6-3/16 (157) 6 (152) 7-1/8 (181) 7-7/8 (200) 7-1/8 (181) 7-3/8 (187) 8-1/4 (210) 7 (178) 8 (203) 8-3/8 (213) 8-3/4 (222) 8-3/4 (222) 10-3/8 (263) 11 (279)
DE 6-1/8 (156) 5-1/8 (130) 6-3/8 (162) 6-3/8 (162) 8 (203) 5-1/2 (140) 6-5/8 (168) 6-1/8 (156) 6-3/4 (171) 7-1/8 (181) 6-1/2 (165) 8-1/4 (210) 7-5/16 (186) 7-5/16 (186) 7-1/8 (181) 8-1/4 (210) 8-3/4 (222) 8-1/2 (216) 8-7/8 (225) 9-1/2 (241) 9 (229) 10 (254) 10 (254) 10-7/8 (276) 10-7/8 (276) 12-15/16 (328) 14-3/8 (365)
143HP– 286HP 17-7/16 (443) 17-1/4 (438) 17-7/16 (443) 17 (432) 19-7/16 (494) 18 (457) 17-15/16 (456) 19-1/16 (484) 18-13/16 (458) 18-15/16 (481) 18-5/16 (465) 20-13/16 (529) 20-3/16 (513) 19-13/16 (503) 19-9/16 (497) 22-5/16 (567) 21-9/16 (548) 20-7/16 (519) 23-1/2 (597) 22-13/16 (579) 20-15/16 (532) 24-1/2 (622) 23-13/16 (605) 25-1/8 (638) 24-15/16 (633) 31-1/8 (791) 32-1/2 (826)
324HP– 445HP – – – 20-3/4 (527) 21-3/16 (538) 18 (457) 21-11/16 (551) 19-1/16 (484) 22-9/16 (573) 22-11/16 (576) 22-1/16 (560) 22-9/16 (573) 20-3/16 (513) 23-9/16 (598) 23-5/16 (592) 24-1/16 (611) 23-5/16 (592) 24-3/16 (614) 25-1/4 (641) 24-9/16 (624) 24-11/16 (627) 26-1/4 (667) 25-9/16 (649) 26-7/8 (683) 26-11/16 (678) 31-1/8 (791) 32-1/2 (826)
YY 9-1/2 (241) 8 (203) 9-1/2 (241) 9-1/2 (241) 12 (305) 9 (229) 10 (254) 9-1/2 (241) 11 (279) 11 (279) 11 (279) 12 (305) 11 (279) 11 (279) 11 (279) 13 (330) 13 (330) 14 (356) 14 (356) 15 (381) 15 (381) 15 (381) 15 (381) 18 (457) 18 (457) 22-1/2 (572) 25 (635)
VD 5-1/4 (133) 5 (127) 5-1/4 (133) 5-1/4 (133) 5-1/4 (133) 5-5/8 (143) 5-5/8 (143) 6-1/4 (159) 6-1/4 (159) 6-1/2 (165) 5-7/8 (149) 6-1/2 (165) 7-1/4 (184) 7-1/4 (184) 7 (178) 7-5/8 (194) 7 (178) 7-5/8 (194) 8-5/8 (219) 8 (203) 8 (203) 9-1/4 (235) 8-3/4 (222) 9-5/8 (244) 9-5/8 (244) 12-1/8 (308) 13-9/16 (344)
Casing Feet Tapping NOTE 8 NOTE 9 NOTE 8 NOTE 9 NOTE 8 NOTE 10 NOTE 10 NOTE 10 NOTE 10 NOTE 8 NOTE 10 NOTE 8 NOTE 10 NOTE 8 NOTE 9 NOTE 10 NOTE 10 NOTE 10 NOTE 10 NOTE 10 NOTE 10 NOTE 10 NOTE 10 NOTE 10 NOTE 10 NOTE 11 NOTE 11
SINGLE STAGE VERTICAL INLINE PUMP
Dimension Details YY
YY
DE
X
X
BW
BW
DC DE
DC
YY
DE
X
DC
BW
DE
AG AG
AG 1/4" NPSF 1/4" NPSF
1/4" 1/4" NPSF NPSF
1/4" NPSF 1/2" NPSF 1/4" NPSFDISCHARGE
1/4" NPSF
1/4" NPSF
SUCTION
1/2" NPSF
SUCTION
1/4" NPSF 1/4" NPSF
1/4" NPSF
1/2" NPSF SUCTION
DH
DISCHARGE
DISCHARGE VD DRAIN TAP
VD
DRAIN TAP
VD
DRAIN TAP
CASING ET TAPPING
PIPE FLANGE SPOOL BASE MATCHESCASING ANSI 125 LBS. FLANGE DIMENSIONSFEET TAPPING
PIPE FLANGE SPOOL BASE MATCHES ANSI 125 LBS. FLANGE DIMENSIONS
DOUBLE SUCTION PUMP SINGLE SUCTION PUMP (10x10x19)
FRAME AG
DH
DH
DOUBLE SUCTION PUMP
286 TC
324 TC
326 TC
326 TC
365 TC
404 TC
405 TC
444 TC
445 TC
447 TC
449 TC
5010 SD
ODP
23.00 (584)
23.00 (584)
23.00 (584)
25.00 (635)
25.00 (635)
28.00 (711)
28.00 (711)
33.00 (838)
35.00 (889)
38.00 (965)
40.00 (1016)
51.00 (1295)
TEFC
27.00 (686)
28.00 (711)
29.00 (737)
35.00 (889)
35.00 (889)
36.00 (914)
36.00 (914)
38.00 (965)
38.00 (965)
41.00 (1041)
49.00 (1245)
64.00 (1626)
Pump Size
Frame
X
DC
DE
Recommended
Pump Weight (Excluding Motor)
Casing Feet Tapping
Drain Tap (NPSF)
Standard
Spool Base
Standard
Spool Base
Minimum
10x10x14
320 TC
25.00 (635)
10.61 (269)
14.80 (376)
32.24 (819)
38.86 (987)
25.00 (635)
10.61 (269)
16.61 (422)
6.00 (152)
10x10x14
360 TC
25.00 (635)
10.61 (269)
14.80 (376)
32.86 (835)
40.24 (1022)
25.00 (635)
10.61 (269)
16.61 (422)
6.50 (165)
15.00 (381)
1104 (500.8)
8" Flange
1/2"
15.00 (381)
1106 (501.7)
8" Flange
10x10x14
400 TC
25.00 (635)
10.61 (269)
14.80 (376)
34.24 (870)
41.49 (1054)
25.00 (635)
10.61 (269)
16.61 (422)
1/2"
8.00 (203)
15.00 (381)
1111 (503.9)
8" Flange
10x10x14
440 TC
25.00 (635)
10.61 (269)
14.80 (376)
35.49 (902)
37.65 (956)
25.00 (635)
10.61 (269)
1/2"
16.61 (422)
9.00 (229)
15.00 (381)
1124 (509.8)
8" Flange
10x10x19
360 TC
26.00 (660)
13.22 (336)
17.97 (456)
31.65 (804)
39.03 (991)
26.00 (660)
1/2"
14.00 (356)
20.00 (508)
6.50 (165)
9.00 (229)
1088 (493.5)
8" Flange
10x10x19
400 TC
26.00 (660)
13.22 (336)
17.97 (456)
33.03 (839)
40.28 (1023)
1/2"
26.00 (660)
14.00 (356)
20.00 (508)
8.00 (203)
9.00 (229)
1093 (495.8)
8" Flange
10x10x19
440 TC
26.00 (660)
13.22 (336)
17.97 (456)
34.28 (871)
1/2"
37.53 (953)
26.00 (660)
14.00 (356)
20.00 (508)
9.00 (229)
9.00 (229)
1096 (497.1)
8" Flange
10x10x19
5010 SD
26.00 (660)
13.22 (336)
17.97 (456)
1/2"
31.53 (801)
44.45 (1129)
26.00 (660)
14.00 (356)
20.00 (508)
6.00 (152)
9.00 (229)
1157 (524.8)
8" Flange
12x12x14
280 TC
25.75 (654)
11.33 (288)
1/2"
17.09 (434)
38.45 (977)
45.08 (1145)
25.75 (654)
14.00 (356)
20.00 (508)
5.00 (127)
20.00 (508)
1369 (621.0) 10" Flange
12x12x14
320 TC
25.75 (654)
1/2"
11.33 (288)
17.09 (434)
39.08 (993)
45.70 (1161)
25.75 (654)
14.00 (356)
20.00 (508)
6.00 (152)
20.00 (508)
1375 (623.7) 10" Flange
12x12x14
360 TC
1/2"
25.75 (654)
11.33 (288)
17.09 (434)
39.70 (1008) 47.08 (1196)
25.75 (654)
14.00 (356)
20.00 (508)
6.50 (165)
20.00 (508)
1377 (624.6) 10" Flange
12x12x14
1/2"
400 TC
25.75 (654)
11.33 (288)
17.09 (434)
41.08 (1043) 48.33 (1228)
25.75 (654)
14.00 (356)
20.00 (508)
8.00 (203)
20.00 (508)
1382 (626.9) 10" Flange
1/2"
12x12x14
440 TC
25.75 (654)
11.33 (288)
17.09 (434)
42.33 (1075) 51.12 (1298)
25.75 (654)
14.00 (356)
20.00 (508)
9.00 (229)
20.00 (508)
1395 (632.8) 10" Flange
1/2"
12x12x18
360 TC
28.00 (711)
12.84 (326)
18.57 (472)
45.12 (1146) 52.50 (1334)
28.00 (711)
15.94 (405)
21.94 (557)
6.50 (165)
22.00 (559)
1809 (820.5) 10" Flange
1/2"
12x12x18
400 TC
28.00 (711)
12.84 (326)
18.57 (472)
46.50 (1181) 53.75 (1365)
28.00 (711)
15.94 (405)
21.94 (557)
8.00 (203)
22.00 (559)
1814 (822.8) 10" Flange
1/2"
12x12x18
440 TC
28.00 (711)
12.84 (326)
18.57 (472)
47.75 (1213) 51.03 (1296)
28.00 (711)
15.94 (405)
21.94 (557)
9.00 (229)
22.00 (559)
1827 (828.7) 10" Flange
1/2"
12x12x18
5010 SD
28.00 (711)
12.84 (326)
18.57 (472)
45.03 (1144) 47.75 (1213)
28.00 (711)
15.94 (405)
21.94 (557)
6.00 (152)
22.00 (559)
1878 (851.8) 10" Flange
1/2"
14x14x15
320 TC
27.50 (699)
12.93 (328)
19.67 (500)
41.75 (1060) 48.37 (1229)
27.50 (699)
14.94 (379)
20.94 (532)
6.00 (152)
22.00 (559)
1636 (742.1) 10" Flange
3/4"
14x14x15
360 TC
27.50 (699)
12.93 (328)
19.67 (500)
42.37 (1076) 49.75 (1264)
27.50 (699)
14.94 (379)
20.94 (532)
6.50 (165)
22.00 (559)
1641 (744.3) 10" Flange
3/4"
14x14x15
400 TC
27.50 (699)
12.93 (328)
19.67 (500)
43.75 (1111) 51.00 (1295)
27.50 (699)
14.94 (379)
20.94 (532)
8.00 (203)
22.00 (559)
1700 (771.1) 10" Flange
3/4"
14x14x15
440 TC
27.50 (699)
12.93 (328)
19.67 (500)
45.00 (1143) 48.25 (1226)
27.50 (699)
14.94 (379)
20.94 (532)
9.00 (229)
22.00 (559)
1713 (777.0) 10" Flange
3/4"
14x14x15
5010 SD
27.50 (699)
12.93 (328)
19.67 (500)
42.25 (1073) 49.00 (1245)
27.50 (699)
14.94 (379)
20.94 (532)
6.00 (152)
22.00 (559)
1748 (792.9) 10" Flange
3/4"
14x14x18
400 TC
31.00 (787)
13.14 (334)
18.34 (466)
43.00 (1092) 50.25 (1276)
31.00 (787)
14.19 (360)
20.94 (532)
8.00 (203)
20.00 (508)
1941 (880.4) 10" Flange
3/4"
14x14x18
440 TC
31.00 (787)
13.14 (334)
18.34 (466)
44.25 (1124) 47.50 (1207)
31.00 (787)
14.19 (360)
20.94 (532)
9.00 (229)
20.00 (508)
1952 (885.4) 10" Flange
3/4"
14x14x18
5010 SD
31.00 (787)
13.14 (334)
18.34 (466)
41.50 (1054) 47.50 (1207)
31.00 (787)
14.19 (360)
20.94 (532)
6.00 (152)
20.00 (508)
1990 (902.6) 10" Flange
3/4"
WWW.AURORAPUMP.COM
DH
YY
VD
BW
9
SINGLE STAGE VERTICAL INLINE PUMP
Pump Features Limitations
Materials of Construction
Maximum Limitation Based on Standard Materials and Pumping Clear Water Series
382A-SC
382B-SC
Speed
3600
1800
1200 RPM
75
250
1800 RPM
200
800
3600 RPM
75
N/A
Standard 225 / Optional 275
Standard 225 / Optional 275
175
250*
Horsepower
Temperature º F Case Working Pressure PSI
* With optional 250# flanges and seal rated for 250 psi
10
Description Series Pump Part Casing Impeller Shaft Bushing Case Wearing Rings Bracket Mechanical Seal (STD) Washer Seat Elastomer Metal Parts Spring
Material of Construction 382A-SC Bronze Fitted Cast Iron ASTM A48 ASTM A743 B584 Bronze Stainless Steel ASTM A582 Type 416 Carbon Graphite Matrix ASTM A743 B584 Bronze Cast Iron ASTM A48
382B-SC Stainless Impeller Fitted Ductile Iron ASTM A536 316 SST Stainless Steel ASTM A582 Type 416 Carbon Graphite Matrix 416 SST Cast Iron ASTM A48
Carbon Ceramic Buna-N 303 SST 303 SST
Carbon Ceramic Buna-N 303 SST 303 SST
THIS PAGE INTENTIONALLY LEFT BLANK
R E
HY
UT
Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. A-02-1081 07/01/15 © 2015 Pentair Ltd. All Rights Reserved.
ISO 9001
AU LIC
IT
DR
ST
800 AIRPORT ROAD, NORTH AURORA, ILLINOIS 60542 WWW.AURORAPUMP.COM
ER E D Q U
TY SYSTEM ALI
IN
19 17
ST EGI
