Transcript
INTRODUCING OIL’S ANSWER TO
TANKLESS WATER HEATING THE
OM-122DW
• Complements the highest efficiency, aquastatic controlled, boilers that use low water temperatures. • Internal thermostat control circuitry allows unit to communicate to zone valve or boiler controller an exclusive feature that no other convector has! • Easy to use LED display panel with built in thermostat that instructs boiler when zone should come on or off based on homeowners desired comfort requirement.
SEMI-ON-DEMAND WATER HEATER
• Variable fan speed maximizes operating efficiency and fuel savings.
• Benefitsaving of both radiant heat andand convective heat. by Enjoy money energy • Whisper quiet fan efficiently distributes heat evenly throughout the home. heating water only when you need it, • Heats an arearun of 300 to 1,000 squarewater feet (heatagain! output of 3,000 BTU per hour on low setting to and never out of hot 20,200 BTU per hour on high). • Saves valuable wall space, replacing up to 37 feet of baseboard*. • Can be installed in less than half the time of baseboard. • 10-year heat exchanger limited warranty. *Baseboard length calculated based on 550BTU/ft.
COOLING - HEATING PRODUCTS
Toyotomi Oil Miser OM-122DW SPECIFICATIONS Model: OM-122DW Type: Combustion: Venting: Heating System: Purpose:
Oil Pressure Vapor Forced Flue / Chimney Vent Semi-On Demand Domestic Hot Water Heater
Ignition:
High Voltage Discharge Spark
Fuels:
No. 2 or No. 1 Low Sulfur Fuel Oil ASTM D396, Ultra-Low Sulfur Diesel (ULSD) ASTM D975, 1-K Kerosene ASTM D3699
Efficiency: 88% (1) Hot Water Input:
148‚000 BTU/h
Maximum Water Temperature: 155° F (approximately) Water Flow Rate/Temp Rise:
6.1 gal/min (40° F rise) 4.8 gal/min (50° F rise) 4.0 gal min (60° F rise) 3.5 gal/min (70° F rise) 3.0 gal/min (80° F rise)
Fuel Consumption:
1.05 gal/h
Capacity of Heat Exchanger: 5.10 gal Fuel System:
External tank (2) Gravity Fed
Dimensions (W x H x D):
12-5/8’’ x 27-3/4’’ x 22-1/2’’
Weight:
79 lbs. Empty
Electrical Rating:
120 Volts AC, 60 Hz Ignition - 120W Burning - 98W
THE
OM-122DW No costly storage of hot water when it is not needed.
Required Accessories: Fuel filter, Flue pipe installation kit (Part #20476440) or Chimney installation adapter kit (Part #20476430 - 5 inch kit or #20476415 - 4 inch kit) Safety Device: Over-heat protector, Ignition safety device, Heat exchanger bi-metal switch, Dual-temperature fuse, Fusible link valve, T&P Valve (included) Nozzle: Quantity of Vapor: Spraying Angle: Spray Pattern:
0.85 GPH 60° Delavan Type XA
Temperature Fuse:
282° F
Electric Current Fuse:
5A
TOYOTOMI USA, INC. 604 FEDERAL ROAD, BROOKFIELD, CT 06804 203-775-1909 WWW.TOYOTOMIUSA.COM
(1) Heat and vaporized water are produced by the combustion process of this water heater. This rating does not take into account heat loss due to condensation of water vapor. (2) External tank to be purchased from local suppliers.
B1400037
