Transcript
BROEN UNIFLEX™ FITTINGS FOR WATER
BROEN UNIFLEX TM FITTINGS FOR WATER
BROEN UNIFLEX TM FITTINGS FOR WATER
TA B L E O F C O N T E N T S
Content Page Table of Contents
2
BROEN UniFlexTM BASIC
4
Product Overview
5
Water Fittings Bench Mounted Fitting with Swivel Spout........................ 6
Single Handle Mixer Bench Mounted.............................16
Bench Fitting Mounted on a Column.................................. 7
Single Handle Mixer Bench Mounted with Hand Shower..................................................................17
BROEN UNIFLEX TM FITTINGS FOR WATER
Two Valve Bench Mounted Fitting on a U-Shaped Column.............................................................. 8
One Handle Two Hole Mixer with Swivel Spout........................................................................18
Two Valve Bench Mounted Fitting on a Tee-shaped Column........................................................... 9
One Handle Mixer with Swivel Spout................................19
Bench Mounted Fitting on a Column with Swivel Spout...................................................................10
Wall and Bench Mounted 2-Hole 2-Hand Mixers with Swivel Spout........................................20
Three Valve Bench Mounted Fitting...........................11
Single Water Fittings ............................................................21
Wall Mounted Fitting.................................................................12 Two Handle Bench Mounted One Hole Mixer with Swivel Spout................................13 Suspended 2-Valve Fitting......................................................14
BROEN UniFlexTM Hoses for Water
22-23
Headworks Rubber Headwork for Plastic Handle..........................................................................................................................24 Ceramic Headwork for Wrist Action Lever
Accessories / Spare Parts
24 25-26
Ordering Information BROEN UniFlexTM Fittings
-2-
27
W W W. B R O E N . C O M
BROEN UNIFLEX TM FITTINGS FOR WATER
-3-
W W W. B R O E N . C O M
B R O E N U N I F L E X TM B A S I C
THIS IS BROEN UNIFLEX™ BASIC BROEN UniFlexTM BASIC line offers high quality and durability combined with the complete program, which adds up to low LCC (Life Cycle Costs).
BROEN OFFERS
Safe and Simple Installation Complete Range – One Stop Shopping Just-In-Time Deliveries
BROEN UNIFLEX TM FITTINGS FOR WATER
One Valve – More Connections Approved as a Complete System Fewer Connection Points
CUSTOMER BENEFITS
➟ ➟ ➟ ➟
MORE EFFICIENCY
M O R E P L U G & P L AY
Mix & Match - Build your Own Configuration Uniform Design / Dimensions Customization to Meet Customer Needs
MORE CUSTOM-MADE
Double Sealing 100 % Testing BROEN POLYCOAT – Powder Coating
MORE QUALITY
The operation and the configuration of the BROEN UniFlexTM BASIC fittings are highly adapted to the requirements of modern laboratories in the educational sector. The fittings are manufactured of the highest quality materials. The surface of laboratory fittings is treated with BROEN POLYCOAT powder coating, which makes the surface highly resistant to most chemicals, UV fading and heat. Most BROEN UniFlexTM BASIC fittings for water are as a standard delivered with a fixed plastic hose nozzle and a plastic handle. As an option it is possible to get water fittings with an integrated check valve, which prevents backflow. The fittings are delivered with easy-to-mount anti-rotational mounting kit.
THIS IS BROEN UNIFLEX™ BROEN UniFlexTM is a unique and patented connection, which allows customers to choose from various connection methods, such as hoses, Cu, PEX of Stainless Steel pipes, without changing the valve itself. It provides unique flexibility, not only for the installer, but also for the end-user. Due to the flexibility of the system, the quick installation and savings on fittings, this system offers lower TIC (Total Installed Costs).
-4-
W W W. B R O E N . C O M
PRODUCT OVERVIEW
Check valve (optional)
Aerator, antisplash nozzle Rubber headwork Plastic handle
Fixed plastic nozzle Wrist action lever
UniFlexTM female M30 x 1.5 x 60mm UniFlexTM male
1/2 NPT x 60mm UniFlexTM female BROEN UNIFLEXTM HOSES
Standard length 700mm
UniFlexTM male
OD 10mm Code “B“
W W W. B R O E N . C O M
OD 15mm Code “H“
G3/8 Code “D“
G1/2 Code “E“
-5-
BROEN UNIFLEX TM FITTINGS FOR WATER
Removable plastic nozzle
BENCH MOUNTED FITTING WITH SWIVEL SPOUT
S
S P E C I F I C AT I O N S
300mm
180mm
With plastic handle
60mm
M30x1.5
Handle: Plastic, with media indication according to EN13792 Spout: Full swivel action Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8) Headwork: Rubber (wrist action lever: ceramic) Opening/closing function: 2 x 360° (wrist action lever: 90°) Temperature range: 0-65°C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 1.4 kg
M AT E R I A L S W I T H M E D I A C O N TA C T
BROEN UNIFLEX TM FITTINGS FOR WATER
Metals: Brass Plastics: PP, SPX (hose) Sealing: EPDM Lubricant: Silicone based Ceramics: Al2O3 96% (wrist action lever only)
700mm hose with OD 10mm inlet connection
O R D E R I N G I N F O R M AT I O N For standard configuration please refer to the item numbers below. Other options: - aerator - removable plastic hose nozzle - integrated non-return valve - fixed spout (rear, left or right) - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot)
With wrist action lever
Model: Plastic handle
Media
S = 150mm
S = 200mm
S = 250mm
S = 300mm
WPC
Potable water, cold
2534 008 1001-52B
2534 084 1001-52B
2534 085 1001-52B
2534 086 1001-52B
WNC
Non-potable water, cold
2534 008 1007-52B
2534 084 1007-52B
2534 085 1007-52B
2534 086 1007-52B
S = 150mm
S = 200mm
S = 250mm
S = 300mm
Model: Wrist action lever
Media
WPC
Potable water, cold
2534 087 1001-52B
2534 088 1001-52B
2534 089 1001-52B
2534 083 1001-52B
WNC
Non-potable water, cold
2534 087 1007-52B
2534 088 1007-52B
2534 089 1007-52B
2534 083 1007-52B
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
-6-
W W W. B R O E N . C O M
BENCH FIT TING MOUNTED ON A COLUMN
S
S P E C I F I C AT I O N S
300mm
With plastic handle 220mm
Handle: Plastic, with media indication according to EN13792 Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8) Headwork: Rubber (wrist action lever: ceramic) Opening/closing function: 2 x 360° (wrist action lever: 90°) Temperature range: 0-65°C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 1.5 kg
M AT E R I A L S W I T H M E D I A C O N TA C T 60mm
M30x1.5
With wrist action lever
BROEN UNIFLEX TM FITTINGS FOR WATER
700mm hose with OD 10mm inlet connection
Metals: Brass Plastics: PP, SPX (hose) Sealing: EPDM Lubricant: Silicone based Ceramics: Al2O3 96% (wrist action lever only)
O R D E R I N G I N F O R M AT I O N For standard configuration please refer to the item numbers below. Other options: - aerator - removable plastic hose nozzle - integrated non-return valve - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot)
Model: Plastic handle
Media
S = 150mm
S = 200mm
WPC
Potable water, cold
2533 085 1001-52B
2533 097 1001-52B
WNC
Non-potable water, cold
2533 085 1007-52B
2533 097 1007-52B
S = 150mm
S = 200mm
Model: Wrist action lever
Media
WPC
Potable water, cold
2533 095 1001-52B
2533 147 1001-52B
WNC
Non-potable water, cold
2533 095 1007-52B
2533 147 1007-52B
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
W W W. B R O E N . C O M
-7-
T W O VA LV E B E N C H M O U N T E D F I T T I N G ON A U-SHAPED COLUMN S
S P E C I F I C AT I O N S
150mm
300mm
With plastichandles 220mm
60mm
M30x1.5
BROEN UNIFLEX TM FITTINGS FOR WATER
700mm hose with OD 10mm inlet connection
Handle: Plastic, with media indication according to EN13792 Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8) Headwork: Rubber (wrist action lever: ceramic) Opening/closing function: 2 x 360° (wrist action lever: 90°) Temperature range: 0-65°C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 2.5 kg
M AT E R I A L S W I T H M E D I A C O N TA C T Metals: Brass Plastics: PP, SPX (hose) Sealing: EPDM Lubricant: Silicone based Ceramics: Al2O3 96% (wrist action lever only)
O R D E R I N G I N F O R M AT I O N For standard configuration please refer to the item numbers below. Other options: - aerator - removable plastic hose nozzle - integrated non-return valve - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot)
With wrist action levers
Model: Plastic handle
Media
S = 150mm
S = 200mm
WPC
Potable water, cold
2533 086 1001-52B
2533 149 1001-52B
WNC
Non-potable water, cold
2533 086 1007-52B
2533 149 1007-52B
S = 150mm
S = 200mm
Model: Wrist action lever
Media
WPC
Potable water, cold
2533 148 1001-52B
2533 150 1001-52B
WNC
Non-potable water, cold
2533 148 1007-52B
2533 150 1007-52B
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
-8-
W W W. B R O E N . C O M
T W O VA LV E B E N C H M O U N T E D F I T T I N G ON A TEE-SHAPED COMLUMN
S P E C I F I C AT I O N S
S
300mm
With plastic handles
220mm
Handle: Plastic, with media indication according to EN13792 Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8) Headwork: Rubber (wrist action lever: ceramic) Opening/closing function: 2 x 360° (wrist action lever: 90°) Temperature range: 0-65°C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 2.3 kg
M AT E R I A L S W I T H M E D I A C O N TA C T 60mm
M30x1.5
BROEN UNIFLEX TM FITTINGS FOR WATER
700mm hose with OD 10mm inlet connection
Metals: Brass Plastics: PP, SPX (hose) Sealing: EPDM Lubricant: Silicone based Ceramics: Al2O3 96% (wrist action lever)
O R D E R I N G I N F O R M AT I O N For standard configuration please refer to the item numbers below.
With wrist action levers
Other options: - aerator - removable plastic hose nozzle - integrated non-return valve - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot)
Model: Plastic handle
Media
S = 300mm
S = 400mm
WPC
Potable water, cold
2533 087 1001-52B
2533 130 1001-52B
WNC
Non-potable water, cold
2533 087 1007-52B
2533 130 1007-52B
S = 300mm
S = 400mm
Model: Wrist action lever
Media
WPC
Potable water, cold
2533 151 1001-52B
2533 152 1001-52B
WNC
Non-potable water, cold
2533 151 1007-52B
2533 152 1007-52B
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
W W W. B R O E N . C O M
-9-
BENCH MOUNTED FIT TING ON A COLUMN WITH SWIVEL SPOUT T = 150mm
S
S P E C I F I C AT I O N S
With plastic handle
410mm
300mm
290mm
Handle: Plastic, with media indication according to EN13792 Spout: Full swivel action Hose nozzle: U-shape - fixed plastic (can be unscrewed by hand) S-shape - removable plastic Headwork: Rubber (wrist action lever: ceramic) Opening/closing function: 2 x 360° (wrist action lever: 90°) Temperature range: 0-65°C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 2 kg
M AT E R I A L S W I T H M E D I A C O N TA C T 60mm
BROEN UNIFLEX TM FITTINGS FOR WATER
M30x1.5
700mm hose with OD 10mm inlet connection
Metals: Brass Plastics: PP, SPX (hose) Sealing: EPDM Lubricant: Silicone based Ceramics: Al2O3 96% (wrist action lever)
O R D E R I N G I N F O R M AT I O N For standard configuration please refer to the item numbers below.
S-shape with plastic handle and removable nozzle
Model: Plastic handle
Media
Other options: - aerator - removable plastic hose nozzle (U-shape) - wrist action lever - integrated non-return valve - T = 200mm - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot) U-shape, fixed nozzle
S = 150mm
S = 200mm
WPC
Potable water, cold
2533 141 1001-52B
2533 142 1001-52B
WNC
Non-potable water, cold
2533 141 1007-52B
2533 142 1007-52B
Model: Plastic handle
Media
S-shape, removable nozzle
S = 150mm
S = 200mm
WPC
Potable water, cold
2533 143 1001-52B
2533 144 1001-52B
WNC
Non-potable water, cold
2533 143 1007-52B
2533 144 1007-52B
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
-10-
W W W. B R O E N . C O M
T H R E E VA LV E B E N C H M O U N T E D F I T T I N G 150mm
S P E C I F I C AT I O N S With plastic handles
500mm
150mm 380mm 190mm
150m m
M AT E R I A L S W I T H M E D I A C O N TA C T
110mm
60mm
700mm hose with OD 10mm inlet connection
With wrist action levers
Metals: Brass Plastics: PP, SPX (hose) Sealing: EPDM Lubricant: Silicone based Ceramics: Al2O3 96% (wrist action lever only) Solder: DIN L-Ag55:Sn
BROEN UNIFLEX TM FITTINGS FOR WATER
M30x1.5
Handle: Plastic, with media indication according to EN13792 Spout: Full swivel action Hose nozzle: Fixed plastic (can be unscrewed by hand from angle valves, thread: male G3/8) Headwork: Rubber (wrist action lever: ceramic) Opening/closing function: 2 x 360° (wrist action lever: 90°) Temperature range: 0-65°C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 3 kg
O R D E R I N G I N F O R M AT I O N For standard configuration please refer to the item numbers below. Other options: - aerator - removable plastic hose nozzle - integrated non-return valve - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot)
Model: Plastic handle
Media
S = 150mm
WPC
Potable water, cold
2533 094 1001-52B
WNC
Non-potable water, cold
2533 094 1007-52B
Model: Wrist action lever
Media
S = 150mm
WPC
Potable water, cold
2533 096 1001-52B
WNC
Non-potable water, cold
2533 096 1007-52B
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
W W W. B R O E N . C O M
-11-
WA L L M O U N T E D F I T T I N G
S P E C I F I C AT I O N S With plastic handle
60mm S 700mm hose with OD 10mm inlet connection M30x1.5
80mm
Handle: Plastic, with media indication according to EN13792 Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8) Headwork: Rubber (wrist action lever: ceramic) Opening/closing function: 2 x 360° (wrist action lever: 90°) Temperature range: 0-65°C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 1.0 kg
M AT E R I A L S W I T H M E D I A C O N TA C T With wrist action lever
BROEN UNIFLEX TM FITTINGS FOR WATER
Metals: Brass Plastics: PP, SPX (hose) Sealing: EPDM Lubricant: Silicone based Ceramics: Al2O3 96% (wrist action lever only)
O R D E R I N G I N F O R M AT I O N For standard configuration please refer to the item numbers below. Other options: - aerator - removable plastic hose nozzle - integrated non-return valve - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot)
Model: Plastic handle
Media
S = 150mm
S = 200mm
WPC
Potable water, cold
2533 136 1001-52B
2533 137 1001-52B
WNC
Non-potable water, cold
2533 136 1007-52B
2533 137 1007-52B
S = 150mm
S = 200mm
Model: Wrist action lever
Media
WPC
Potable water, cold
2533 138 1001-52B
2533 139 1001-52B
WNC
Non-potable water, cold
2533 138 1007-52B
2533 139 1007-52B
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
-12-
W W W. B R O E N . C O M
TWO HANDLE BENCH MOUNTED ONE HOLE MIXER WITH SWIVEL SPOUT S
S P E C I F I C AT I O N S
300mm
Handle: Plastic, with media indication according to EN13792 Spout: Full swivel action Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8) Headwork: Rubber (wrist action lever: ceramic) Opening/closing function: 2 x 360° (wrist action lever: 90°) Temperature range: 0-65°C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 1.8 kg
180mm
With plastic handles
60mm
M AT E R I A L S W I T H M E D I A C O N TA C T
M30x1.5
2x700mm hoses with OD 10mm inlet connection
BROEN UNIFLEX TM FITTINGS FOR WATER
Metals: Brass Plastics: PP, SPX (hose) Sealing: EPDM Lubricant: Silicone based Ceramics: Al2O3 96% (wrist action lever only)
O R D E R I N G I N F O R M AT I O N For standard configuration please refer to the item numbers below. Other options: - aerator - removable plastic hose nozzle - integrated non-return valve - fixed spout - alternative hose inlet connection / without a hose - OD 10mm Cu pipes - other inlet options - national approvals
With wrist action levers
Model: Plastic handle
Media
S = 150mm
S = 200mm
S = 250mm
S = 300mm
WPC
WPH
Potable water, cold/hot
2536 039 1039-52B
2536 045 1039-52B
2536 046 1039-52B 2536 047 1039-52B
WNC
WNH
Non-potable water, cold/hot
2536 039 1040-52B
2536 045 1040-52B
2536 046 1040-52B 2536 047 1040-52B
S = 150mm
S = 200mm
Model: Wrist action lever
Media
S = 250mm
S = 300mm
WPC
WPH
Potable water, cold/hot
2536 041 1039-52B
2536 048 1039-52B
2536 049 1039-52B 2536 050 1039-52B
WNC
WNH
Non-potable water, cold/hot
2536 041 1040-52B
2536 048 1040-52B
2536 049 1040-52B 2536 050 1040-52B
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
W W W. B R O E N . C O M
-13-
S U S P E N D E D 2 - VA LV E F I T T I N G
S P E C I F I C AT I O N S
700mm hoses with OD 10mm inlet connection
M30x1.5
Handle: Plastic, with media indication according to EN13792 Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8) Headwork: Rubber Opening/closing function: 2 x 360° Temperature range: 0-65°C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 2.5 kg
60mm
M AT E R I A L S W I T H M E D I A C O N TA C T
BROEN UNIFLEX TM FITTINGS FOR WATER
60mm
Metals: Brass Plastics: PP, SPX (hose) Sealing: EPDM Lubricant: Silicone based
O R D E R I N G I N F O R M AT I O N 79mm
66mm
With plastic handles
126mm
For standard configuration please refer to the item numbers below. Other options: - aerator - removable plastic hose nozzle - wrist action lever - models with single valve, 2 valves in 90° and 4 valves - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals - WPH (Water Potable Hot) - WNH (Water Non-potable Hot)
Model: Plastic handle
Media
2-valve 180°
WPC
Potable water, cold
2530 064 1001-52B
WNC
Non-potable water, cold
2530 064 1007-52B
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
-14-
W W W. B R O E N . C O M
BROEN UNIFLEX TM FITTINGS FOR WATER
-15-
W W W. B R O E N . C O M
SINGLE HANDLE MIXER BENCH MOUNTED
S P E C I F I C AT I O N S S
300mm
Handle: Metal, BROEN POLYCOAT powder coated Spout: Swivel action Hose nozzle: Aerator Cartridge: Ceramic (temperature and flow regulation type) Opening/closing function: 25°, mixing function: ±45° Temperature range: 0°C - 90°C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 2.4 kg
210mm
M AT E R I A L S W I T H M E D I A C O N TA C T
BROEN UNIFLEX TM FITTINGS FOR WATER
60mm
Metals: Brass Plastics: POM, PTFE, SPX (hose) Sealing: EPDM Lubricant: Silicone based Ceramics: Al2O3 96%
O R D E R I N G I N F O R M AT I O N M30x1.5
2x700mm hoses with OD 10mm inlet connection
For standard configuration please refer to the item numbers below. Other options: - integrated non-return valve - removable and fixed hose nozzles - flow restrictor (5 l/min - alternative hose inlet connections - OD 10mm Cu pipes
Media: Model
S = 150mm
S = 200mm
S = 250mm
S = 300mm
2535 038 1035-52B
2535 039 1035-52B
2535 040 1035-52B
2535 041 1035-52B
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
-16-
W W W. B R O E N . C O M
SINGLE HANDLE MIXER BENCH MOUNTED WITH HAND SHOWER S P E C I F I C AT I O N S S
300mm 171mm
210mm
60mm
60mm
M AT E R I A L S W I T H M E D I A C O N TA C T Metals: Brass Plastics: POM, PTFE, SPX (hose), ABS Sealing: EPDM Lubricant: Silicone based Ceramics: Al2O3 96%
BROEN UNIFLEX TM FITTINGS FOR WATER
M30x1.5
M30x1.5
Handle: Metal, BROEN POLYCOAT powder coated Spout: Swivel action Hose nozzle: Aerator Cartridge: Ceramic (temperature and flow regulation type) Opening/closing function: 25°, mixing function: ±45° Temperature range: 0°C - 90°C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 3.0 kg
O R D E R I N G I N F O R M AT I O N For standard configuration please refer to the item numbers below. Other options: - integrated non-return valve - removable and fixed hose nozzles - flow restrictor (5 l/min)
OD 10mm Cu-pipes
Media: Model
S = 150mm
S = 200mm
S = 250mm
S = 300mm
2535 042 1035-52C
2535 043 1035-52C
2535 044 1035-52C
2535 045 1035-52C
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
W W W. B R O E N . C O M
-17-
ONE HANDLE TWO HOLE MIXER WITH SWIVEL SPOUT
218mm
S P E C I F I C AT I O N S
S
Handle: Metal, BROEN POLYCOAT powder coated Spout: Swivel action Hose nozzle: Aerator Cartridge: Ceramic (temperature and flow limiting type) Opening/closing function: 25°, mixing function: ±45° Temperature range: 0°C - 90°C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Inlets: Eccentric couplings with male G1/2 Weight: 1.5 kg
150m m
With long handle
M AT E R I A L S W I T H M E D I A C O N TA C T
BROEN UNIFLEX TM FITTINGS FOR WATER
78mm
Metals: Brass Plastics: POM, PTFE, SPX (hose) Sealing: EPDM Lubricant: Silicone based Ceramics: Al2O3 96%
O R D E R I N G I N F O R M AT I O N
With short handle
For standard configuration please refer to the item numbers below. Other options: - removable hose nozzle - bench mounted model - different inlet connections (with BROEN UniFlexTM rear wall connection, lead-in. etc)
Media:
Model
S = 200mm
S = 250mm
S = 300mm
Short Handle
2535 010 1035
2535 004 1035
2535 016 1035
Long Handle
2535 007 1035
2535 001 1035
2535 013 1035
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
-18-
W W W. B R O E N . C O M
ONE HANDLE MIXER WITH SWIVEL SPOUT 218mm
S P E C I F I C AT I O N S With long handle
385mm
m 200m
Handle: Metal, BROEN POLYCOAT powder coated Spout: Full swivel action (110° limited swivel or no swivel as an option, should be mentioned when ordering) Hose nozzle: Removable plastic (aerator included) Cartridge: Ceramic (temperature and flow limiting type) Opening/closing function: 25°, mixing function: ±45° Temperature range: 0°C - 65°C Max. working pressure: 10 bar / 147 psi Weight: 2.8 kg
230mm
M AT E R I A L S W I T H M E D I A C O N TA C T
60mm
2x900mm hoses with OD 10mm inlet connection
BROEN UNIFLEX TM FITTINGS FOR WATER
M28x1.5
Metals: Brass Plastics: PP, POM, PTFE, SPX (hose) Sealing: EPDM Lubricant: Silicone based Ceramics: Al2O3 96%
O R D E R I N G I N F O R M AT I O N For standard configuration please refer to the item numbers below.
120mm
With short handle
Media:
Model
S = 200mm
Short Handle
G350328135
Long Handle
G350318135
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
W W W. B R O E N . C O M
-19-
WA L L A N D B E N C H M O U N T E D 2 - H O L E 2 - H A N D L E M I X E R S WITH SWIVEL SPOUT S P E C I F I C AT I O N S
Wall mounted model
Handle: Plastic, with media indication according to EN13792 Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8) Headwork: Rubber Opening/closing function: 2 x 360° Temperature range: 0-65°C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 1.7 kg
700mm hose with OD 10mm inlet connection
S
116mm m 60m
150m m
M30x1.5
M AT E R I A L S W I T H M E D I A C O N TA C T
Bench mounted model
S
116mm
BROEN UNIFLEX TM FITTINGS FOR WATER
Metals: Brass Plastics: PP, SPX (hose) Sealing: EPDM Lubricant: Silicone based Ceramics: Al2O3 96%
O R D E R I N G I N F O R M AT I O N For standard configuration please refer to the item numbers below. Other options:
60mm 180m m
700mm hose with OD 10mm inlet connection
M30x1.5
- aerator - flow restrictor (5 l/min) - integrated check valve - fixed spout - S-spout for wall mounted model - wrist action lever - other options for hose inlet connections For further information please contact your local BROEN LAB representative.
Model: Wall mounted Media
S = 150mm
S = 200mm
S = 250mm
S = 300mm
WPC
WPH
Potable water, cold/hot
2536 279 1039-52B
2536 215 1039-52B
2536 280 1039-52B 2536 281 1039-52B
WNC
WNH
Non-potable water, cold/hot
2536 279 1040-52B
2536 215 1040-52B
2536 280 1040-52B 2536 281 1040-52B
S = 150mm
S = 200mm
Model: Bench mounted Media
S = 250mm
S = 300mm
WPC
WPH
Potable water, cold/hot
2536 274 1039-52B
2536 214 1039-52B
2536 275 1039-52B 2536 276 1039-52B
WNC
WNH
Non-potable water, cold/hot
2536 274 1040-52B
2536 214 1040-52B
2536 275 1040-52B 2536 276 1040-52B
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
-20-
W W W. B R O E N . C O M
S I N G L E W AT E R F I T T I N G S
No. 2530 317 10xx-08 (S=50mm) No. 2530 315 10xx-08 (S=75mm) G1/2”
For media XX and other inlet options please refer to page 27 or contact your BROEN LAB sales representative.
60 mm
80 mm
Valve for suspended or wall mounting with a plastic handle, a rubber headwork and a fixed plastic nozzle (can be unscrewed by hand).
S
Materials with medium contact: Metals: Brass Plastics:
PP
Sealing: EPDM Lubricant:
Based on silicone
60 mm
No. 2532 199 10xx-08
Materials with medium contact:
Valve for suspended or wall mounting with a plastic handle, a rubber headwork and a fixed plastic nozzle (can be unscrewed by hand).
Metals: Brass
For media XX and other inlet options please refer to page 27 or contact your BROEN LAB sales representative.
Sealing: EPDM
60 mm
Plastics: PP
Lubricant:
Based on silicone
G1/2” 75 mm
N E W M O D E L S A R E AVA I L A B L E Please contact your BROEN LAB representative for more information!
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
W W W. B R O E N . C O M
-21-
BROEN UNIFLEX TM FITTINGS FOR WATER
122 mm
B R O E N U N I F L E X T M H O S E S F O R W AT E R
BROEN UniFlexTM flexible hoses
BROEN LAB offers BROEN UniFlexTM hoses as an easy way to make the installation in the laboratory where safety and efficiency are required. BROEN UniFlexTM hoses are the ideal solution where there is a higher requirement for flexibility. Installation with flexible hoses saves you time and labor - in other words reduced installation costs.
BROEN UNIFLEX TM FITTINGS FOR WATER
A wide range of fittings and lengths available for BROEN UniFlexTM hoses enables customers to choose the perfect hose for their application. BROEN UniFlexTM hoses for water are manufactured of soft cross-linked polyethylene (SPX), which is approved for use with drinking water and meets all hygienic requirements. From the outside the hose is secured by a Stainless Steel braiding that ensures long service life and durability. If you still prefer a standard way of installation with Cu, Stainless Steel, or PEX-pipes, BROEN LAB offers a wide range of connection fittings and adaptors for pipes of different dimensions.
BROEN UniFlexTM connection fittings and adaptors for Cu, Stainless Steel and PEX pipes
For further information and mounting instructions please refer to www.BROEN.com or contact your local BROEN LAB representative.
-22-
W W W. B R O E N . C O M
9 3 V - B R O E N U N I F L E X T M S P X H O S E S F O R W AT E R HOSE
INLET CONNEC TIONS 93 V XX XX XXXX
OUTLET CONNEC TIONS 93 V XX XX XXXX
93 V XX XX XXXX
G3/8”A fixed connection (Code 32)
Straight BROEN UniFlex connection with EPDM o-ring (Code 20)
SPX hose with braiding in stainless steel
G1/2”A fixed connection (Code 31)
G3/4”A fixed connection (Code 33)
G3/8” union connection (Code 41)
* Marking for water with Part no. and Media indication
45° BROEN UniFlex connection with EPDM o-ring (Code 25)
HOSE LENGTHS
*
Definition of length (L)
90° BROEN UniFlex connection with EPDM o-ring (Code 30) G1/2” union connection (Code 40)
G3/4” union connection (Code 42)
OD10mm connection for compression fittings (Code 10)
*
If 45° and 90° elbows occur on the same hose, it will as default be mounted in U-form
M10x1mm short connection with EPDM o-ring (Code 51)
*Standard lengths of hoses (L): OD12mm connection for compression fittings(Code 12)
OD15mm connection for compression fittings (Code 15)
OD15mm connection for press fittings (Code 65)
Straight BROEN UniFlexTM connection with EPDM o-ring (Code 20)
*
45° BROEN UniFlexTM connection with EPDM o-ring (Code 25)
* *
W W W. B R O E N . C O M
PLEASE NOTE: M10 connections can only be used to mixer and multimedia fittings
*All O-rings are lubricated with silicone based lubricant
S P E C I F I C AT I O N S Inner hose material: SPX (soft PEX) Braiding: Stainless steel with one green stripe Hose materials with media contact: SPX, brass, EPDM and silicone based lubricant Inside diameter: 8.2mm Outside diameter: 12mm Max. working pressure: 10 bar Max. working temperature: 90°C Bending radius (inner): ≥ 40mm Min. length with connections: 160mm
0500 = 500mm 0700 = 700mm 1000 = 1000mm 1200 = 1200mm 1500 = 1500mm 2000 = 2000mm 2500 = 2500mm 3000 = 3000mm
Length tolerance of hoses: L = ≤400mm (- 0, +10mm) L = 401mm to 1000mm (- 0, + 20mm) L = >1000mm (- 0, + 30mm)
EXAMPLE OF HOSE C O N F I G U R AT I O N 1200mm hose with OD 12mm inlet connection and straight UniFlexTM outlet connection
➟
90° BROEN UniFlexTM connection with EPDM o-ring (Code 30)
*
93V12201200 * Other lengths are available on request
-23-
BROEN UNIFLEX TM FITTINGS FOR WATER
Definition of length (L)
RUBBER HEADWORK PLASTIC HANDLE
S P E C I F I C AT I O N S BROEN UniFlexTM water fittings with plastic handles are delivered with rubber headworks. Water fittings with rubber headwork offer quick and precise adjustment and a long service life. Opening/closing function: 2 x 360° turn Media: Hot/cold water Temperature range: Please refer to the individual fitting Max. working pressure: 10 bar / 147 psi
bar
Metals: Brass Sealing: EPDM Lubricant: Silicone based
FLOW CHART kPa
M AT E R I A L S W I T H M E D I A C O N TA C T
Rubber headwork
Rubber headwork No. 1977000 l/min
CERAMIC HEADWORK WRIST ACTION LEVER S P E C I F I C AT I O N S BROEN UniFlexTM PREMIUM water fittings with wrist action lever are delivered with a ceramic 90° turn headwork.
Ceramic headwork
Opening/closing function: 90° turn Media: Hot/cold water Temperature range: Maximum 90°C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure
Metals: Brass Sealing: EPDM Plastics: POM Lubricant: Silicone based Ceramics: Al-oxyd 96%
FLOW CHART bar
M AT E R I A L S W I T H M E D I A C O N TA C T
kPa
BROEN UNIFLEX TM FITTINGS FOR WATER
O R D E R I N G I N F O R M AT I O N
O R D E R I N G I N F O R M AT I O N LEFT TURN CLOSING RIGHT TURN CLOSING Ceramic headwork Ceramic headwork No. 1976400 No. 1976500
-24-
l/min
W W W. B R O E N . C O M
A CC E S S O R I E S / S PA R E PA R T S
Illustration
Description
Adaptor for aerator M19x1 - M22x1 (fits 2534- and 2536-models) G3/8A - M22x1 (fits angle valves and elder spouts) Aerator Thread: M22x1 Thread: female G1/2
BROEN item No.
2539 005 1001 2539 064 1001
2539 006 1001 19 025 009
Adaptor for removable plastic nozzle
M19x1 - G 1/2 G3/8 - G1/2
2539 003 1001 2539 048 1001
Removable plastic nozzle (thread: female G1/2)
2539 004 1001
Fixed plastic nozzle Thread: M19x1 Thread: G3/8
Mounting set for G1/2 connection
2539 010 1001 2539 040 1001
19141000
1/2”NPT inlet with female BROEN UniFlexTM connection (incl. O-ring) L
L=30mm 1550233V L=60mm 1527454V L=90mm 1550246V
Mounting set for M30x1,5 connection
Threaded inlet pipe M30x1,5
L=30mm 1919003 L=60mm 1919002 L=90mm 1919004
L
W W W. B R O E N . C O M
19 190 000
-25-
BROEN UNIFLEX TM FITTINGS FOR WATER
A CC E S S O R I E S / S PA R E PA R T S
Illustration
Description
BROEN item No.
G1/2
140mm
Vacuum pump for water fitting (remember to order a metal adaptor shown below)
19 198 009
78mm
Adaptor (chrome plated brass) for vacuum pump
Thread: M19x1 - G1/2A (fits 2534- and 2536-models) Thread: G3/8A - G1/2A (fits angle valves and elder spouts)
2539 007 1001 2539 043 1001
BROEN UNIFLEX TM FITTINGS FOR WATER
Plastic handle with media indication 191501401001 (WPC) according to EN 13792 191501401002 (WPH) 191501401007 (WNC) 191501401008 (WNH)
Wrist action lever (handle only)
1916433G-5168 (green)
-26-
W W W. B R O E N . C O M
O R D E R I N G I N F O R M AT I O N B R O E N U N I F L E X TM F I T T I N G S
Generally, item number for BROEN UniFlex fittings has the following structure:
25 XX XXX 10 XX - XX X BROEN LAB Series no. *Country code 10 - International 30 - Japan 80 - Denmark 81 - Germany 82 - UK 83 - Benelux 84 - Australia
Inlet type 05 - 30mm, 1/2”NPT -BROEN UniFlexTM 14 - 60mm, 1/2”NPT-BROEN UniFlexTM 18 - 90mm, 1/2”NPT-BROEN UniFlexTM 02 - 30mm, G1/2-Ø14,7x6,4 (EN200 type C) 08 - 60mm, G1/2-Ø14,7x6,4 (EN200 type C) 17 - 90mm, G1/2-Ø14,7x6,4 (EN200 type C) 50 - 30mm, M30x1.5 52 - 60mm, M30x1.5 54 - 90mm, M30x1.5
Serial number
Media code WPC
01 - Water potable, cold (WPC)
WPH
02 - Water potable, hot (WPH)
WNC
07 - Water non-potable, cold (WNC)
WNH
08 - Water non-potable, hot (WNH) 35 - Tempered water (one handle mixer)
WPC
WPH
39 - Water potable (WPC /WPH)
WNC
WNH
40 - Water non-potable (WNC /WNH)
* For water some national standards may apply, therefore contact your BROEN LAB representative for more information.
W W W. B R O E N . C O M
-27-
BROEN UNIFLEX TM FITTINGS FOR WATER
Models 30 - Angle valves 32 - Straight valves 33 - Valves on a column 34 - One handle water fittings 35 - One handle mixers 36 – Two handle mixers
Hose type blank - none B - 0.7m with OD10mm C - Cu pipes D - 0.7m with G3/8 union nut E - 0.7m with G1/2 union nut H - 0.7m with OD15mm
BROEN LAB develops, manufactures and delivers complete gases and air, from source to user. BROEN LAB solutions are used by professional users in many kinds of laboratories, from the education and health sectors to industry in general. Our products are already an integrated nitrogen, vacuum and compressed air, to the control and regulation of pure gases in critical applications such as a gas chromatography and spectrometry. Our extensive knowledge allows us to continually develop and optimize our products so that they meet customer needs understanding of working environments and safety in laboratories allow us to develop custom solutions for projects around the world. Use us to plan your project so we can advise you on laboratory layout and design. HEAD OFFICE
INTERNATIONAL OFFICES
BROEN LAB GROUP Skovvej 30 • DK-5610 Assens Tel. +45 6471 2095 • Fax +45 6471 2476 E-mail:
[email protected]
BROEN VALVES Ltd. Unit 9 Navigation Point, Golds Hill Way Tipton • West Midlands DY4 OPY • U.K. Tel. +44 121 522 4515 • Fax +44 121 522 4535 E-mail:
[email protected]
Deutscher Kontakt Tel. +45 6373 2252 • Fax +45 6471 2476 E-mail:
[email protected]
99B0055 BROEN UNIFLEXTM FITTINGS FOR WATER - BASIC 08-10-2014
BROEN Singapore Pte. Ltd. 10 Bukit Batok Cresent #10-02 • The Spire S(658079) • Singapore Tel: +65 6298 0662 • Fax: +65 6298 0468 E-mail:
[email protected]
for our Danish site at Assens. The quality management system of BROEN LAB by the internationally acknowledged EN ISO 9001:2008. reputation for quality and reliability. www.broen.com
